• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.13-21
• /
• 2002

In the interior lighting, usually we refer to TAL and general lighting. The last one is that we generally adopt it in the interior lighting conditions. Here, glare is most important factor of them, especially in working place using VDT. Reference or development of estimation on glare has been studied in CIE, IESNA etc. and these of glare regulations now are applied differently in the interior lighting design or estimation on glare. But we have no glare regulation in detail, of course except G classification, which has limit of itself, so in my case it is impossible to apply in the interior lighting. On this paper, with some of main glare regulations in the world and our conditions in the interior lighting which are selected carefully, in an actual state it has been estimated So, it intended to blow which one is most suitable or what factors are considered of them, also show glare index which are appropriate to our interior lighting.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.499-505
• /
• 2018

Shipping and logistics safety, security system is strengthening worldwide, the development of shipping and logistics safety security core technology for national security logistics system construction has been carried out. In addition, it is necessary to localize the Array Detection System, which is a core component of the container search machine, to cope with the 100% pre-inspection of the container scheduled for 2018 in the United States. In this research, we propose a test software program developed by using TI-RTOS (Texas Instruments - Real Time Operating System) with a test digital signal processing board which is developed self development. We have developed a program that can test GPIO, SRAM, TCP/IP, and SDcard using M4 MCU. Also we propose a study on a self-developed Digital Signal Processing Board among the array detection systems that replace foreign products. We have developed a test board that can test M4 MCU and developed an X-Ray Detector Digital Signal Processing Board that combines MCU and FPGA.

• Journal of Practical Engineering Education
• /
• v.6 no.2
• /
• pp.105-110
• /
• 2014

In this work, mechanical characteristics of titanium diaphragm have been studied as a potential robust substrate and a diaphragm material for automotive tire pressure sensor. Lamination process techniques combined with traditional micromachining processes have been adopted as suitable fabrication technologies. To illustrate these principles, capacitive pressure sensors based on titanium diaphragm have been designed, fabricated and characterized. The fabrication process for micromachined titanium devices keeps the membrane and substrate being at the environment of 20 MPa pressure and $200^{\circ}C$ for a half hour and then subsequently cooled to $24^{\circ}C$. Each sensor uses a stainless steel substrate, a laminated titanium film as a suspended movable plate and a fixed, surface micromachined back electrode of electroplated nickel. The finite element method is adopted to investigate residual stresses formed in the process. Besides, out-of-plane deflections are calculated under pressures on the diaphragm. The sensitivity of the fabricated device is $9.45ppm\;kPa^{-1}$ with a net capacitance change of 0.18 pF over a range 0-210 kPa.

• Journal of KIISE:Software and Applications
• /
• v.34 no.7
• /
• pp.681-687
• /
• 2007

Face recognition technique is very popular for a personal information security and user identification in recent years. However, the face recognition system is very hard to be implemented due to the difficulty where change in illumination, pose and facial expression. In this paper, we consider that an illumination change causing the variety of face appearance, virtual image data is generated and added to the D-LDA which was selected as the most suitable feature extractor. A less sensitive recognition system in illumination is represented in this paper. This way that consider nature of several illumination directions generate the virtual training image data that considered an illumination effect of the directions and the change of illumination density. As result of experiences, D-LDA has a less sensitive property in an illumination through ORL, Yale University and Pohang University face database.

• The KIPS Transactions:PartD
• /
• v.12D no.5 s.101
• /
• pp.755-764
• /
• 2005

Recently, as it is considered more important to identify the function of ail unknown genes in living things, many tools for gene prediction have been developed to identify genes in the DNA sequences. Unfortunately, most of those tools use their own schemes to represent their programs results, requiring researchers to make additional efforts to understand the result generated by them So, it is desirable to provide a standardized method of representing predicted gene information, which makes it possible to automatically produce the predicted results for a given set of gene data In this paper, we describe an effective U representation for various predicted gene information, and present an XML-based analysis tool for gene predication results based on this representation. The developed system helps users of gene prediction tools to conveniently analyze the predicted results and to automatically produce the statistical results of the prediction. To show the usefulness of the tool, we applied our programs to the results generated by GenScan and GeneID, which are widely used gene prediction systems.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.2
• /
• pp.191-201
• /
• 2006

New design equations for calculating the lateral-torsional buck ling moment resistances of stepped I-section beams with/without continuous lateral top-flange bracing subjected to a point load, a series of point loads, and a uniformly distributed load, are suggested based on the results of elastic finite-element analyses. The new equations presented in this study are compared with the current moment gradient modifiers presented by other researchers and specifications. Although the study paper presents mainly stepped-beam cases subjected to a point load and a uniformly distributed load. The proposed equations include the length-to-height ratio effects for stepped beams with continuous lateral top-flange bracing. The new moment gradient correction factors could be easily used to calculate the lateral-torsional buckling moment resistance of stepped I-beams.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.340-345
• /
• 2009

There are a number of situations where the oral mucosa can be sucked or pressed to produce relatively banal but clinical distinctive changes. The labial and buccal mucosa and tongue may develop protuberances in areas where a tooth is missing or extra space is present. The mucosa is pressed and sucked into these spaces, thus leading to the development of a fibrous hyperplasia. This case report describes the management of fibrous hyperplasia in oral mucosa. Fibrous hyperplasia can be formed by habitual pressure or suction in oral mucosa. Treatment of fibrous hyperplasia consists of simple excision and, if feasible, elimination of the cause. And habit control is a important factor for preventing recurrence.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.3
• /
• pp.307-316
• /
• 2011

The majority of maritime accidents happened by human factor. For that reason, navigation experts want to an intelligent support system for navigation safety, without officer involvement. The expert system which is one of artificial intelligence skills for navigation support is an important tool that a machine can substitute for an expert through the design of a knowledge base and inference engine using the experience or knowledge of an expert. Further, in the real world, a complex situation requires synthetic estimation with the input of experts in various fields for the correct estimation of the situation, not any one expert. In particular, synthetic estimation is more important for navigation situations than in other cases, because of diverse potential threats. This paper presents the method of knowledge fusion pertaining to navigation safety knowledge from various expert systems, using a blackboard system. Then we will show the validity of the method via a design and implementation of test system effort.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.49-60
• /
• 2008

The current VIPS are not effective in safety point of view, because they are originally developed for mimicking loop detectors. Therefore, it is important to identify vehicle trajectories in real time, because recognizing vehicle movements over a detection zone enables to identify which situations are hazardous, and what causes them to be hazardous. In order to improve limited safety functions of the current VIPS, this research has developed a computer vision system of monitoring individual vehicle trajectories based on image processing, and offer the detailed information, for example, incident detection and conflict as well as traffic information via tracking image detectors. This system is capable of recognizing individual vehicle maneuvers and increasing the effectiveness of various traffic situations. Experiments were conducted for measuring the cases of incident detection and abnormal vehicle trajectory with rapid lane change.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.863-869
• /
• 2008

In this paper, a system with sensor network security mechanism which can be applied to home network structure is designed and it is implemented on a virtual network of a home network middleware. The basic structure of home networking middleware supports one-to-one (unicast) or broadcast communication mode between the lookup server and service nodes on the network. Confidentiality and authentication are key security factors of the one-to-one communication and user authentication is crucial for broadcasting mode. One of the sensor network's security techniques SPINS consists of SNEP and ${\mu}TESLA$. The SNEP ensures confidentiality and authentication, and ${\mu}TESLA$ provides broadcast authentication. We propose a SPIN based home network middleware and it is implemented by using the CBC-MAC for MAC generation, the counter mode (CTR) for message freshness, the pseudo random function (PRF) and RC5 as encryption algorithm. The implementation result shows that an attacker cannot decrypt the message though he gets the secure key because of CTR mode. In addition, we confirmed that a received message of the server is authenticated using MAC.