• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.1-10
• /
• 2002

With the explosive growth of the number of Internet users and Internet-related services, the research on construction of broadband Optical Internet by using WDM technologies is actively is actively progressed. In this paper, we design the offset time decision (OTD) algorithm for supporting the QoS in optical networks based on optical burst switching (OBS), which is the new switching paradigm, and evaluate the performance of it. The proposed algorithm determines a reasonable offset time considering traffic load of network and the number of wavelengths to guarantee the burst loss rate (BLR) of high priority Internet traffic as a QoS parameter. In order to design the proposed OTD algorithm, firstly we make the new burst loss formula, which includes the effect of offset time. The decision of offset time corresponding to the requested BLR, however, should use the reverse formula of proposed one, thus we are not able to use it without any changes. In this paper, we define the heuristic loss formula (HLF) that can be changed into reversed formula by using the proposed formula and proportional equation considering its characteristics. Finally we show the OTD algorithm to decide the offset time by using HLF. We show that the requested BLR is guaranteed under various traffic load with the determinded offset time by using the proposed OTD algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7071-7077
• /
• 2015

In recently, the demand of cover-glass is increased because smart phone, tablet pc, and electrical device has become widely used. The display of mobile device is enlarged, so it is necessary to have a high strength against the external force such as contact or falling. In fabrication process of cover-glass, a grinding process is very important process to obtain high strength of glass. Conventional grinding process using a grinding wheel is caused such as a scratch, chipping, notch, and micro-crack on a surface. In this paper, polishing system using a abrasive film was developed for a grinding of mobile cover-glass. To evaluate structural stability of the designed system, finite element model of the polishing system is generated, and multi-body dynamic analysis of abrasive film polishing machine is proposed. As a result of the analysis, stress and displacement analysis of abrasive film polishing system are performed, and using laser displacement sensor, structural stability of abrasive film polishing system is confirmed by measuring displacement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7061-7070
• /
• 2015

Multi-Response Surface Optimization aims at finding the optimal setting of input variables considering multiple responses simultaneously. The Weighted Mean Squared Error (WMSE) minimization approach, which imposes a different weight on the two components of mean squared error, squared bias and variance, first obtains WMSE for each response and then minimizes all the WMSEs at once. Most of the methods proposed for the WMSE minimization approach to date are classified into the prior preference articulation approach, which requires that a decision maker (DM) provides his/her preference information a priori. However, it is quite difficult for the DM to provide such information in advance, because he/she cannot experience the relationships or conflicts among the responses. To overcome this limitation, this paper proposes a posterior preference articulation method to the WMSE minimization approach. The proposed method first generates all (or most) of the nondominated solutions without the DM's preference information. Then, the DM selects the best one from the set of nondominated solutions a posteriori. Its advantage is that it provides an opportunity for the DM to understand the tradeoffs in the entire set of nondominated solutions and effectively obtains the most preferred solution suitable for his/her preference structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.278-286
• /
• 2010

Until now, most of the studies about the impulse buying have focused mainly on the product of off-line shop, while there have relatively been very few studies about the product in internet shopping mall. The goal of this study was to understand Impulse Buying Behavior(IBB) for digital contents in the internet. Data has been collected from 278 respondents. The questionnaire method was adopted to collect the data for this study. The research was conducted by using SPSS 12.0 and AMOS 5.0. It was found that as follows: First, marketing stimulation factors, such as price, product, promotion was related positively to FLOW. Second, marketing stimulation factors was related partly positively to IBB. Third, FLOW has mediating effects in the relations between marketing stimulation factors and IBB. Finally, Self-Behavior Control and Sensation Seeking Tendancy has moderating effect in the IBB process. Thus, It also provides a core strategic Implication with Digital Contents Marketers.

• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.815-822
• /
• 2006

It is very important that they accurately predict the software development cost in the early stage of a software development. Because cost estimations are required when bidding for a contract or determining whether a project is feasible in terms of a cost-benefit analysis. The criterions of the software cost estimation was set up to calculate software development cost more exactly, which is applied to made up a budget of the software business or to calculate a suitable cost to start the business in our country. However, as the software technology and environment are changing very rapidly, it need to enhance the criterion of the cost estimation continuously. Therefore, we tried to apply technology of software and a variety of factors of environment changes in present. Most of all, we proposed an introduction and readjustment of the adjustment factor applying 14 general system characteristics to improve the accuracy of the cost estimation and the schedule adjustment factor that is required by practicians. For evaluating the accuracy in terms of the real data, we have used MMRE & PRED. In result, we proved that the accuracy was clearly improved by applying the scale factor and readjusted VAF with 14 general system characteristics. Moreover, we evaluated the accuracy of the schedule adjustment factor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.106-111
• /
• 2017

In this study, the stiffness of an LMU (Leg Mating Unit), which is a device required for installing the top side part of an offshore structure, was examined through structural analysis. This unit is mounted on the supporting point of the structure and is used to absorb the shock at installation. It is a cylindrical structure with an empty center. To support the vertical load, elastomeric bearings (EBs) and iron plates are laminated in layers. The stiffness of the EBs is basically influenced by the size of the bearings, but it varies with the number of laminated sheets inside the same sized structure. The relationship between the stiffener and the compressive stiffness is investigated, and its design is suggested. The stiffness of the EBs is analyzed by calculating the reaction force, while controlling the displacement. First, the relationship between the size of the reinforcing plate and the compressive stiffness is considered. Next, the relationship between the number of stacked reinforcing plates and the compression stiffness is considered. Different loads are required for each installed point. The goal is to design the compression stiffness in such a way that the same deformation occurs at each point in the analysis. In this study, ANSYS is used to perform the FE analysis.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.41-50
• /
• 2008

Intense competition for resources has forced many countries pay attention to their eyes to the ocean. Therefore, the disputes and the conflict over the delimitation of the EEZ and continental shelf will be sharpened. Since 1982 Law of the Sea Convention, Korea has opened the talks with Japan and China to discuss the boundary issues as the adjacent water zone is less than 400 miles between Korea and Japan and Korea and China. This study is to review the important rules and techniques for the delimitation of the maritime boundary which have defined in the Law of the Sea Convention and IHO-51 technical guide and to figure out how to build the maritime delimitation GIS DB to negotiate effectively with the neighboring countries. Definition of the base point and baseline will be the utmost important concept to delimit the ocean boundary. The policy makers and the specialists who prepare for the international negotiation meeting between the countries have to be ready to draw the maritime boundary for our best interest under the Law of the Sea Convention. The negotiation strategies and the principles can be made with the concrete and reliable database relevant to maritime boundary issues. So effective and fast strategic decision for negotiation can only be made based on maritime boundary delimitation GIS DB.

• Journal of Engineering Education Research
• /
• v.8 no.1
• /
• pp.71-83
• /
• 2005

This paper presents an internet-based self-learning educational system which can be enhancing efficiency in the learning process of Java language. The proposed self-learning educational system is called Java Web Player(JWP), which is a Java application program and is executable through Java Web Start technologies. Also, three important sequential learning processes : concept learning process, programming practice process and assessment process are integrated in the proposed JWP using Java Web Start technologies. This JWP enables the learners to achieve efficient and interesting self-learning since the learning process is designed to enhance the multimedia capabilities on the basis of various educational technologies. Furthermore, internet-based on-line voice presentation and its related texts together with moving images are synchronized for efficient language learning process. Also, a simple and useful Java compiler is included in the JWP for providing language practice environment such as coding, editing, executing and debugging Java source files. Finally, repeated practice can make the learners to understand easily the key concepts of Java language. Simple multiple choices are given suddenly to the learners while they are studying through the JWP and the test results are displayed on the message box. This assessment process is very essential to increase the learner's academic capability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.606-614
• /
• 2016

In order to expand the market of the domestic space information industry, which is currently saturated, overseas expansion is essential, but the prospects are limited. Therefore, an effective strategy of overseas expansion is needed. Given the current state of such spatial information industry, V-World is expected to play a very important role. In the world market for space information, in order to ensure the export competitiveness of the domestic space information industry, in the present study, research and development was carried out on the V-World-based packaged goods model as one possible method. First of all, to analyze the current situation and characteristics of the spatial information industry, to grasp V-World as a commodity and derive the relationship between foreign demand and V-World, the sales destinations and methods were defined. To formulate the basic strategy of the fusion-composite package export utilizing V-World on the basis of the basic concept of the product, the necessary components were designed. In response to this fusion-composite package product mix, the overseas promotion of spatial information-related companies it to be expected.

• Journal of Service Research and Studies
• /
• v.7 no.4
• /
• pp.51-68
• /
• 2017

Financial technology (FinTech) is an emerging financial service sector include innovations in financial literacy and investment, retail banking, education, and crypto-currencies like bitcoin. One of the crucial branch of financial technology-third-party payment (TPP) is undergoing rapid growth, with online/mobile systems replacing offline financial systems. System quality and user attitudes are key perceptions driving third-party payment usage, the importance of these perceptions, however, may be different with countries as users' thinking varies from country to country. Thus, the purpose of this study is to elaborate how factors differ from China to Korea by drawing on the unified theory of acceptance and use of technology (UTAUT2). Additionally, this study also aims to propose a multi-attribute evaluation of the third-party online payment system based on analytic hierarchy process (AHP), fuzzy sets and technique for order performance by similarity to ideal solution (TOPSIS), to examine the relative importance of the perceptions influencing new technology adoption intention. The results showed that the price value has the most significant influence on Chinese perceptions, while the perceived credibility has the most significant effect on Korean perceptions. Sub-criteria also performs different results to Chinese and Korean third-party online payment system.