• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.311-313
• /
• 2012

연구개발을 통해 얻어진 결과물 자체가 잘 보존되고 관리되면, 기술이전 등 상업화가 가능하다. 그렇지만, 연구 현장에서 연구개발을 통해 얻어진 데이터셋이나 소프트웨어 등 성과물들은 개인별로 관리되고 있거나 제대로 관리되지 않아서, 재사용이 어려운 실정이다. 따라서 국가차원에서는 전체 연구성과물의 메타정보 수집을 통한 연구성과물 현황 관리와 이를 분석한 분석정보의 활용에 중점적으로 노력하고, 실제연구개발을 수행하는 개별 연구원이나 기관들은 연구성과물의 재활용에 초점을 맞춘 성과물 관리가 필요하다. 이를 위해 본 연구에서는 연구개발의 결과물을 관리하기 위한 시스템 아키텍처 설계 방안을 제시한다. 연구성과물의 체계적인 관리를 위해서 연구성과물 등록, 저장, 조회/사용, 관리 등 연구성과물 관리를 위한 프로세스 마련이 필요하고, 개별 연구성과물에 대한 메타항목 정의도 필요하다는 결론을 도출했다. 이를 통해 연구성과물의 재생산을 위한 비용을 절감할 수 있으며, 연구의 연속성이 확보되어 질높은 연구성과를 창출할 수 있는 환경이 마련될 것으로 기대한다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.369-374
• /
• 2010

최근 건설 산업에서 BIM이 각광 받으면서, BIM 기반의 다양한 엔지니어링 기술 도입 및 프로세스 적용이 시도 되고 있다. 이중 BIM 기반의 프로젝트 운영을 위해서는 BIM의 데이터의 저장, 수정, 배포뿐만 아니라, 관련 주체간의 협업이 가능한 환경이 요구되고 있으며, 이러한 환경 구축을 위해 제조업에서 활용되고 있는 PDM(Project Data Management) 또는 PLM (Product Life-cycle Management) 시스템을 벤치마킹한 CPLM (Construction Project Life-cycle Management)과 같은 BIM 기반 협업 시스템이 등장하고 있다. 하지만 기존의 이러한 협업 시스템의 경우, 건설 프로젝트가 가지는 다양한 계약 방식, 관리 단계, 관련 정보의 체계 등에 대한 종합적 계획 없이 프로젝트의 각 참여 주체들의 기존 관리 방식을 도입함으로써, 당초 BIM 기술을 도입하여 달성하고자 하는 원활한 협업 환경을 구축하는데 한계를 가지고 있다. 따라서 본 연구에서는 최근 BIM 가이드라인의 도입 등에서 시도되고 있는 BIM Planning이라는 개념을 활용하여, BIM 기반 협업 시스템의 구축 이전에 BIM을 관리하기 위한 관리 구조, 방식, 데이터 체계 등을 효과적으로 계획하고, 이를 시스템에 반영시킴으로써 보다 효과적인 BIM 기반 협업 환경이 구축될 수 있는 체계를 제안하였다.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.3-11
• /
• 2016

Recently, overseas plant orders of domestic enterprises are steadily increased, and the amount of orders in the first half of 2014 were 93% increased compared to the previous year. In addition, now which is the third quarter of 2015, overseas plant orders are already over 249.8 billion dollars so the interests of plant industry research has been increased. In the life cycle of the plant project, CM before the construction stage is to complement the uncertainties that are inherent in the early stages of the project, and from the viewpoint of supporting the rational decision-making, the importance of its role is on the rise. Among them, excavating and investing participation plan in the planning stage is an important work that has a large impact force to influence the success and failure of future project. However, the work has become a problem with frequent consultations due to decision-making, continuous modification, and inefficient repetitive tasks. Therefore, it is needed that work process should be changed to effectively accommodate. The purpose of this paper is to derive the major work items for excavating and investing participation plan in the planning stage of the plant project, and establish a standardized work process through the Delphi analysis. The result of this study is expected to be utilized for EPC companies in ensuring the technical competitiveness in planning on overseas markets, and improve the efficiency of work.

• Journal of Internet Computing and Services
• /
• v.11 no.6
• /
• pp.145-157
• /
• 2010

In this paper, we describe the design details and their implementation of a workflow model (or business process model) analysis system to be used for enhancing resource allocation efficiency and operational performance of enterprise workflows. In other word, the analysis works, proposed in this paper, on XPDL-based workflow models aim to verify the static aspects of the workflow models. Also, the system implemented in the paper is able to not only analyze structural patterns and resource allocation plans' efficiency of enterprise workflows modeled by the XPDL process definition language developed by the international standardization organization, WfMC, but also provide various forms of analytical reports. Conclusively, we strongly believe that the workflow analysis system developed in the paper enables workflow modelers to not only analyze and scrutinize structural patterns of their workflow models but also estimate their process resources assigning and planning measurements in order to improve accuracy, reliability and efficiency of enterprise workflows.

• The Journal of Society for e-Business Studies
• /
• v.26 no.4
• /
• pp.1-13
• /
• 2021

With the development of big data-related technologies, it has become possible to process vast amounts of data that could not be processed before. Accordingly, the establishment of an automated data selection and fusion process for the realization of big data-based services has become a necessity, not an option. In this paper, we propose an automation technique to create meaningful new information by fusing datasets containing spatial information. Firstly, the given datasets are embedded by using the Node2Vec model and the keywords of each dataset. Then, the semantic similarities among all of datasets are obtained by calculating the cosine similarity for the embedding vector of each pair of datasets. In addition, a person intervenes to select some candidate datasets with one or more spatial identifiers from among dataset pairs with a relatively higher similarity, and fuses the dataset pairs to visualize them. Through such semi-automatic data fusion processes, we show that significant fused information that cannot be obtained with a single dataset can be generated.

• Nuclear Engineering and Technology
• /
• v.25 no.4
• /
• pp.539-547
• /
• 1993

A stochastic approach using continuous time Markov process is presented to model the one-dimensional nuclide transport in fractured rock media as a further extension for previous works［1-3］. Nuclide transport of decay chain of arbitrary length in the single planar fractured rock media in the vicinity of the radioactive waste repository is modeled using a continuous time Markov process. While most of analytical solutions for nuclide transport of decay chain deal with the limited length of decay chain, do not consider the case of having rock matrix diffusion, and have very complicated solution form, the present model offers rather a simplified solution in the form of expectance and its variance resulted from a stochastic modeling. As another deterministic way, even numerical models of decay chain transport, in most cases, show very complicated procedure to get the solution and large discrepancy for the exact solution as opposed to the stochastic model developed in this study. To demonstrate the use of the present model and to verify the model by comparing with the deterministic model, a specific illustration was made for the transport of a chain of three member in single fractured rock medium with constant groundwater flow rate in the fracture, which ignores the rock matrix diffusion and shows good capability to model the fractured media around the repository.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.208-211
• /
• 2005

This paper describes the development process of steering system for reduce idle vibration through the data level of frequency and sensitivity. High stiffness and light weight vehicle is a major target in the refinement of passenger cars to meet customers' contradictable requirements between NVH performance and fuel economy. The target frequency of the steering system is set by benchmarking of a competitive vehicle and the vibration mode map is used to separate steering column modes from resonance of body structure and engine idle rpm. This paper descirbes the analysis approach process for high stiffness of steering system and the design guideline is suggested about steering column and support system by using mother car at initial design stage. We used a patent map in order to analyze accurately a technical trend and suggested the design process using dynamic damper of steering system considering sensitivity. And we established techniques of analysis on steering system and evaluated the level of accuracy of analysis through correlating the test and analysis results. It makes possible to design the good NVH performance vehicle at initial design stage and save vehicles to be used in tests. These improvements can lead to shortening the time needed to develop better vehicles.

• Review of KIISC
• /
• v.19 no.5
• /
• pp.11-20
• /
• 2009

지난 2009년 7월 7일부터 수차례에 걸쳐 청와대 및 다수의 중요 웹 사이트에 대해 분산서비스거부(Distributed Denial of Service, DDoS) 공격이 시도되었다. 이 공격에서 사용된 공격 방법은 공격 트래픽의 형태와, 공격 수행을 위한 공격 네트워크의 구성 방법에 있어서 기존의 방법과는 다른 형태를 띠었고, 이로 인해 공격탐지 및 차단이 쉽게 이루어지지 않아, 피해가 매우 컸다. 이와 같이 최근에는 기존의 DDoS 공격 탐지 및 차단 기술로는 쉽게 탐지 및 차단할 수 없는 고도화된 분산서비스거부 공격이 시도되고 있으며, 그로 인한 피해가 커지고 있는 상황이다. 분산서비스거부 공격은 이미 2000년 이전부터 발생하여온 오래된 공격임에도 불구하고 아직까지 이를 효과적으로 차단하지 못하고 있는 것이다. 이는 전체 정보통신 운영환경과 분산서비스거부 공격의 전체 공격 프로세스에 대한 심도있는 분석을 통해 인터넷 전반에 걸친 거시적인 DDoS공격 대응 방안을 모색하는 것이 아니라, 개개의 공격 형태를 탐지하고 차단할 수 있는 방법을 모색했기 때문이다. 이에, 본 논문에서는 과저부터 현재까지 DDoS공격이 어떻게 발전해 왔는지를 분석하고, 현재 발생하고 있는 분산서비스 거부 공격의 공격 체계와 공격 기법에 대한 복합적 분석을 통해 현재의 고도화된 분산서비스 거부 공격을 효과적으로 차단할 수 있는 분산서비스거부 공격 통합 대응체계를 제안한다.

• The KIPS Transactions:PartD
• /
• v.14D no.1 s.111
• /
• pp.67-82
• /
• 2007

Due to the classes in object-orientation, which are too detailed and specific, their reusability can be decreased. Components, considered to be more coarse-grained compared to objects, help maintain software complexity effectively and facilitate software reuse. Furthermore, component technology becomes essential by the appearance of the new frameworks, such as MDA, SOA, etc. Consequently, it is necessary to reengineer an existing object-oriented system into a component-based system suitable to those new environments. In this paper, we propose a model-based quantitative reengineering methodology to identify components from object-oriented systems. We expand system model and process, which are defined in our prior work, more formally and precisely. A system model, constructed from object-oriented system, is used to extract and refine components in quantitative ways. We develop a supporting tool and show effectiveness of the methodology through applying it to an existing object-oriented system.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.462-467
• /
• 2001

There are growing interests for knowledge-based information to build up competitiveness both in public and in private. Construction industry compared to other industries, shows strong knowledge usages in products and process. R&D investment over the construction industry has been decreased since economic crisis (IMF), so technology status of domestic construction industry has gap of 4.6 years with developed countries. Information infra also lowers in use of information and investment than other industries. In case of knowledge management, usage of information technology and vision establishment show high status but knowledge sharing and evaluation stay in low level. For the administration of knowledge-based information, there are needs of continuous R&D investments, educations for inspiring employees to knowledge share, systems for knowledge estimation and evaluation, and organizational culture.