• Resources Recycling
• /
• v.29 no.6
• /
• pp.88-97
• /
• 2020

In this study, the selected waste plastic waste logistics used for cement sintering were classified into two types through the process of sorting and crushing, analyzing the characteristics of each, and analyzing the correlation of the strength after cement manufacturing. The experimental variables were classified into soft and hard waste plastic waste, and the correlations between calorific value, chlorine, and moisture were analyzed. In addition, some of each waste was selected and melted, and the basic characteristics were evaluated by analyzing the structure and calorific value. The results of the experiment showed that it was evaluated that it is suitable to obtain a heat source by separating soft waste plastic wastes and sintering them with materials having similar properties. As a result of examining the wastes by strength after cement manufacturing, it was analyzed that the use of hard plastics greatly contributes to the compressive strength on the 1st and 28th, and the use of soft plastics contributes to the compressive strength on the 28th. However, these characteristics are evaluated by collecting only a part of the waste, and since the deviation of the waste occurs, continuous management is required, and a follow-up study on the environmental problems caused by the use of waste is required.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.6
• /
• pp.25-32
• /
• 2020

The seed, the most basic component, is an important factor in increasing production and efficiency in agriculture. Seeds with superior genes can be expected to improve agricultural productivity, crop survival, and reproduction. Currently, however, screening of superior seeds depends mostly on manual work, which requires a lot of time and manpower. In this paper, we propose a system that can extract the characteristics of seed phenotypes by using computer image processing technology, so that even a small number of people and a short period of time are needed to extract the characteristics of seeds. The proposed system detects individual seeds from images containing large quantities of seeds, and extracts and stores various characteristics such as representative colors, area, perimeter and roundness for each individual seed. Due to the regularity of input images, the accuracy of individual seed extraction in the proposed system is 99.12% for soybean seeds and 99.76% for rice seeds. The extracted data will be used as basic data for various data analyses that reflect the opinions of experts in the future, and will be used as basic data to determine the expressive nature of each seed.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.524-533
• /
• 2020

The free-trade-zone system has been implemented in industrial-complex-type free-trade zones with a focus on the manufacturing industry since 1970, and was intended to attract foreign investment and increase trade by providing benefits such as tax reduction and deregulation to tenant companies. However, foreign investment in these industrial-complex-type free trade zones has decreased significantly. On the other hand, port-type free-trade zones have great potential to attract foreign investment for development due to the increase in port traffic. The developmental trends in the free-trade-zone system have been studied primarily in the manufacturing industry, and those studies must be extended. In this paper, the role and operation of free-trade zones are examined and problems highlighted. We analyzed a business model specialized in port-type free-trade zones to identify problems, propose measures to improve the system for re-exporting domestic goods to the customs area for storage, and upgrade overall operations. The effects of our measures were analyzed by simple simulation. These proposed improvements in the operation of port-type free-trade zones will help attract foreign companies to these international logistics hubs and global delivery centers.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.454-460
• /
• 2020

The goal of this study was to classify the area of Larix kaempferi forest available for timber production, considering the legal, physical, environmental, and technical constraints, and to optimize the forest resources and the potential of timber production in South Korea for 50 years. The results showed that the area of Larix kaempferi forest available for timber production is limited to 124,000 ha, 48% of the total area. Without further efforts in resource management, sustainable timber production of Larix kaempferi cannot be guaranteed even at the current level of timber supply. To enhance the potential of timber production for this species, two alternatives were considered: a 705-km annual increment of forest roads (alternative 1) and a 1,000-kmannual increment of forest roads (alternative 2) to enlarge forest areas available for timber production. The results showed that alternative 1 is feasiblefor sustainable timber production both at the current level and with a 5% increment of timber supply. However, alternative 1 is not sufficient in the case of a 10% increment of timber supply with a low growing stock, whereas alternative 2 is sufficient. Therefore, an increase in forests roads as well as regeneration efforts are required to improve the timber production potential of Larix kaempferi in South Korea.

• Research in Plant Disease
• /
• v.26 no.4
• /
• pp.239-249
• /
• 2020

To find out the cause of the fire blight outbreak in apples and pears of Korea in 2019, we investigated disease appearing situation of thirty fire blight infected orchards, and interviewed farmers to determine the cultivation characteristics. Fire blight occurred mostly in orchards that had infected more than 2 years before. The cause of this were as follows: farmers did not know the symptoms of the disease properly. It is presumed that it has spread from the first occurrence to the surrounding orchards by flower-visiting insects or farmers and to a short distance or a long distance by the same cultivator or co-farmer. These series of processes repeated in the newly spreading area, and then disease reports increased as farmers became aware of fire blight. To minimize the spread of fire blight in Korea, it suggested that thorough education of farmers for early diagnosis and quantitative detection technology that can diagnose even in no symptom showing plants. And chemical or biological spraying systems suitable for domestic cultivation methods, which are producing large fruits, and molecular epidemiological studies of pathogens.

• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.366-373
• /
• 2020

This study investigated habitat diversity changes by conducting weir operations at the Sejongbo site in the Geum River basin. High-resolution aerial photographs taken before and after the weir-opening operation were used for habitat analyses. We classified water and bar areas into 17 types, such as lotic habitats, including riffles, runs, and glides, and lentic habitats, including reservoirs, pools, bar-head backwaters, and bar ponds. Then, we estimated each habitat area quantitatively, calculated a habitat diversity index, and established a habitat diversity map. Our results indicated that after the weir-opening operation, lotic habitats and new types of shallow lentic habitats increased in the water area. In addition, for the bar area, bare lands without cultivation increased distinctively. Finally, we observed that the habitat diversity index drastically increased after the weir-opening operation, which could provide a relatively simple channel of diverse habitats.

• Atmosphere
• /
• v.31 no.2
• /
• pp.241-249
• /
• 2021

A smart city utilizes data collected from various sensors through the internet of things (IoT) and improves city operations across the urban area. Recently substantial research is underway to examine all aspects of data that requires for the smart city operation. Atmospheric data are an essential component for successful smart city implementation, including Urban Air Mobility (UAM), infrastructure planning, safety and convenience, and traffic management. Unfortunately, the current level of conventional atmospheric data does not meet the needs of the new city concept. New and innovative approaches to developing high spatiotemporal resolution of observational and modeling data, resolving the complex urban structure, are expected to support the future needs. The geographic information system (GIS) integrates the atmospheric data with the urban structure and offers information system enhancement. In this study we proposed the necessity and applicability of the high resolution urban meteorological dataset based on heavy fog cases in the smart city region (e.g., Sejong and Pusan) in Korea.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.11
• /
• pp.71-77
• /
• 2011

Recently, non-destructive stress measurement method using magnetic anisotropy sensor has been applied to the construction site such as steel bridges and steel pipes. In addition, steel rib used in the tunnel construction site was found to be possible to measure the stress by non-destructive method. In this study, steel loading experiments using magnetic anisotropy sensor developed in Japan and strain gauges were conducted to derive stress sensitivity curve for domestic steel SS400. Also, additional steel loading experiments and numerical analysis were performed for evaluation of applicability for non-destructive stress measurement method using magnetic anisotropy sensor. As a result of this study, stress sensitivity curves for domestic steel SS400 were derived using output voltage measured by magnetic anisotropy sensor and average of stress measured by strain gauges depending on the measurement location. And as a result of comparing additional steel loading experiments with the numerical analysis, error level of magnetic anisotropy sensor is around 20MPa. When considering the level of the yield stress(245MPa) of steel, in case of using magnetic anisotropy sensor in order to determine the stress status of steel, it has sufficient accuracy in engineering. Especially, magnetic anisotropy sensor can easily identify the current state of stress which considers residual stress at steel structure that stress measurement sensor is not installed, so we found that magnetic anisotropy sensor can be applied at maintenance of steel structure conveniently.

• The Journal of Korean Philosophical History
• /
• no.25
• /
• pp.7-40
• /
• 2009

The aim of this paper is to establish the theoretical foundation on "the integrative study of the character education for the promotion of social and emotional competencies of children.". Based on the social and emotional learning(SEL), this paper is tried to find out the effective ways to develop children's good character. According to SEL, social and emotional competence is the ability to understand, manage, and express the social and emotional aspects of one's life in ways that enable the successful management of life tasks such as learning, forming relationships, solving everyday problems, and adapting to the complex demands of growth and development. And it is also the process of acquiring and effectively applying the knowledge, attitudes, and skills necessary to recognize and manage emotions. Five key competencies such as self-awareness, social awareness, responsible decision making, self-management, relationship skills are taught, practiced, and reinforced through SEL programming. Both the social and emotional learning movement and the character education share in common the idea that much of human character can be modified for the better through learning. While character educators engage in developing civic virtue and moral character in our youth for more compassionate and responsible society, SEL educators engage in educating for a safe, secure, caring society. To effectively teach social and emotional competencies, the teachers themselves must embrace a teaching and learning philosophy that models the attitudes, feelings, and behaviors we aim to teach.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.3
• /
• pp.13-25
• /
• 2004

The key exchange protocols are very crucial tools to provide the secure communication in the broadband satellite access network. They should be required to satisfy various requirements such as security, key confirmation, and key freshness. In this paper, we present the guideline of security functions in BSAN(Broadband Satellite Access Network), and analyze the specification of the security primitives and the hey exchange Protocols for the authenticated key agreement between RCST(Return Channel Satellite Terminal) and NCC(fretwork Control Centre). In addition, we propose the security specification for a domestic broad satellite network based on the analysis on the analysis profile of ETSI(European Telecommunications Standards Institute) standards. The key exchange protocols proposed in ETSI standard are vulnerable to man-in-the-middle attack and they don't provide key confirmation. To overcome this shortcoming, we propose the 4 types of the key exchange protocols which have the resistant to man-in-the-middle-attack, key freshness, and key confirmation, These proposed protocols can be used as a key exchange protocol between RCST and NCC in domestic BSAN. These proposed protocols are based on DH key exchange protocol, MTI(Matsumoto, Takashima, Imai) key exchange protocol, and ECDH(Elliptic Curve Diffie-Hellman).