• Spatial Information Research
• /
• v.20 no.1
• /
• pp.27-38
• /
• 2012

The recent development of CFD techniques are being involved w ith Environmental Impact Assessment and Environmental DesignroThey are being applied to the Site Planning and Engineering Design works as a new trendroHowever, CFD laboratory works are not extended to the field works in Industrial Project due to inaccuracy of the data input process that is cause by absence of regional height informationsroHence, in this study, we promote to build a new initial input data processing steps and algorithms for CFD Model generation. ENVI-met model is very popular, efficient, and freely downloadable CFD model. Light Detection And Ranging (LiDAR) are well known state of art technology and dataset proving a reliable accuracy for CFD. We use LiDAR data as a input source for CFD input producing process and algorithm development and evaluation. CFD initial input data generation process and results derived from am development and set is very useful and efficient for rapid CFD input data producing and maklomore reliable CFD Model forec st for atmospheric and climatic analysis for planning and design engineering industry.

• Journal of the Korean earth science society
• /
• v.42 no.5
• /
• pp.504-513
• /
• 2021

Different physical processes, according to the atmospheric boundary layer types, were used in the Local Data Assimilation and Prediction System (LDAPS) of the Unified Model (UM) used by the Korea Meteorological Administration (KMA). Therefore, it is important to verify the atmospheric boundary layer types in the numerical model to improve the accuracy of the models performance. In this study, the atmospheric boundary layer types were verified using observational data. To classify the atmospheric boundary layer types, summer intensive observation data from radiosonde, flux observation instruments, Doppler wind Light Detection and Ranging(LIDAR) and ceilometer were used. A total number of 201 observation data points were analyzed over the course 61 days from June 18 to August 17, 2019. The most frequent types of differences between LDAPS and observed data were type 1 in LDAPS and type 2 in observed(each 53 times). And type 3 difference was observed in LDAPS and type 5 and 6 were observed 24 and 15 times, respectively. It was because of the simulation performance of the Cloud Physics such as that associated with the simulation of decoupled stratocumulus and cumulus cloud. Therefore, to improve the numerical model, cloud physics aspects should be considered in the atmospheric boundary layer type classification.

• The Korean Journal of Applied Statistics
• /
• v.24 no.6
• /
• pp.1225-1235
• /
• 2011

This paper suggests a method for tuning a numerically simulated wind speed data, provided by NIMR(National Institute of Meteorological Research) and generated from a numerical meteorological model to improve a wind resource map with a $1Km{\times}1Km$ resolution. To this end, "tuning factor method" is developed that consists of two procedures. First, estimate monthly wind fields based on a suitably designed statistical wind field model that covers 345,682 regions obtained by $1Km{\times}1Km$ lattice sites in South Korea. The second procedure computes the tuning factor and then tunes the generated wind speeds of each month as well as each lattice site. The second procedure is based on the wind fields estimated by the first procedure. The performance of the suggested tuning method is demonstrated by using two wind data(both TMY and numerically simulated wind speed data) of 75 weather station areas.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.181.1-181.1
• /
• 2010

기후변화의 주요인이 되는 온실가스 감축을 목표로 화석연료를 대체하기 위한 대체 에너지 개발을 위한 많은 노력이 진행되고 있다. 풍력 에너지와 같은 신재생에너지는 이러한 하나의 해결 수단이 될 수 있으며 풍력 에너지 사업의 활성화를 위해서는 정확한 풍력 정보 제공이 우선이다. 풍력-기상자원지도는 풍력 발전에 유용한 정보 제공을 위한 목적으로 중규모 수치 모델을 이용하여 작성된다. 본 연구에서는 중규모 수치 모델의 정확도 향상을 위한 자료동화 방법으로써 Four-Dimensional Data Assimilation (FDDA) 방법을 이용한다. 풍력-기상자원지도는 공간분해능 1 km 해상도로 개발된다. 풍력-기상자원지도는 1998-2008년까지의 평균적인 상태에 대하여 모의를 하기 위하여 통계적인 방법으로 11년 기간의 평균과 유사한 기간을 선정하였다. 풍력-기상자원지도는 연 평균, 월 평균 풍속과 주 풍향, 주풍향 발생 비율 등의 정보를 제공한다. 우리나라 풍속의 평균 분포는 내륙 산악지역, 남해안, 제주도에서 강풍이 발생하며 주 풍향은 대체로 북서풍이다. 주 풍향의 발생비율은 산악 지역과 남 동해안에서 높아 풍력 발전의 최적지 정보를 제공한다. 1 km 해상도의 모델과 관측의 오차는 서해안 등의 해안지역보다 강원 산악지역에서 오차가 더욱 증가하였다. 이러한 산악 지역의 오차는 복잡한 지형에서는 1km 미만의 수 백 m 해상도 수치모의가 필요함을 지시한다. 따라서 본 연구에서는 WRF-LES 모형을 이용하여 333m 해상도의 기상자원지도를 개발한다. 333m 해상도의 자원지도 영역은 강원도 지역에 대하여 모의되었다. 333m 해상도의 풍속 분포는 1km 해상도의 풍속 분포와 비교하였을 때 풍속의 분포가 보다 세밀하게 표현되었다. 정량적인 검증을 하였을 때 관측소에 따라 차이는 있었으나 1km 해상도에서 과대 모의된 풍속의 분포가 현저히 개선이 되었으며, 시간적인 경향도 잘 일치함을 보였다.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.4
• /
• pp.232-245
• /
• 2017

In this study, the high-resolution numerical simulation results considering landuse characteristics are analyzed by using single layer Urban Canopy Model (UCM) in Weather Research Forecast (WRF). For this, the impact of urban parameters such as roughness length and anthropogenic heat in UCM is analyzed. These values are adjusted to Seoul metropolitan area in Korea. The results of assessment are verified against observation from surface and flux tower. Forecast system equipped with UCM shows an overall improvement in the simulations of meteorological parameters, especially temperature at 2 m, surface sensible and latent heat flux. Major contribution of UCM is appreciably found in urban area rather than non-urban. The non-urban area is indirectly affected. In simulated latent heat flux, applying UCM is possible to simulate the change similarly with observations on urban area. Anthropogenic heat employed in UCM shows the most realistic results in terms of temperature and surface heat flux, indicating thermodynamic treatment of UCM could enhance the skills of high resolution forecast model in urban and non-urban area.

• Journal of Korea Water Resources Association
• /
• v.44 no.12
• /
• pp.967-974
• /
• 2011

Based on daily time series from RDAPS numerical weather forecast, Streamflow prediction was simulated and the result of ESP analysis was implemented considering quantitative mid- and long-term forecast to compare the results and review applicability. The result of ESP, ESP considering quantitative weather forecast, and flow forecast from RDAPS numerical weather forecast were compared and analyzed with average observed streamflow in Guem River Basin. Through this process, the improvement effect per method was estimated. The result of ESP considering weather information was satisfactory relatively based on long-term flow forecast simulation result. Discrepancy ratio analysis for estimating accuracy of probability forecast had similar result. It is expected to simulate more accurate flow forecast for RDAPS numerical weather forecast with improved daily scenario including time resolution, which is able to accumulate 3 hours rainfall or continuous simulation estimation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.1
• /
• pp.17-25
• /
• 2013

In this paper we interpreted the changes in wind field over complex mountainous terrains. The results of our study can be applied for predicting the direction of fire spread and for establishing strategies for fire prevention. The study area is bounded by $12{\times}12$ km domains of the Samcheok's long-term ecological research (LTER) site located in the east coast, in which a large-fire had occurred from 7 to 13 April 2000. Because of the area's complex topography, we compared the result of the Weather Research and Forecasting (WRF) mesoscale model with those observed by four automated weather stations. The WRF simulation overestimated the wind speed by 5 to 8 m/s (~200%) in comparison with those from four automated weather stations. The wind directions observed by the AWSs were from various directions whereas those from WRF model were mostly west wind at all stations. Overall, the simulations by the WRF mesoscale models were not appropriate for the estimation of microscale wind fields over complex mountainous areas. To overcome such inadequacy of reproducing the wind fields, we employed the ENVI-met model over Samcheok's LTER site. In order to test the model's sensitivity with the terrain effects, experimental simulations were conducted with various initial conditions. The simulation results of the ENVI-met model showed a reasonable agreement in wind speeds (about 70% accuracy) with those of the four AWSs. Also, that the variations in wind directions agreed reasonably well with changes in terrain effect. We concluded that the ENVI-met model is more appropriate in representing the microscale wind field over complex mountain terrains, which is required to predict fire spread and to establish strategies for forest fire prevention.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1643-1652
• /
• 2020

To investigate the characteristics of detailed flows in a building-congested district, we coupled a computation fluid dynamics (CFD) model to the local data assimilation and prediction system (LDAPS), a current operational numerical weather prediction model of the Korea Meteorological Administration. For realistic numerical simulations, we used the meteorological variables such as wind speeds and directions and potential temperatures predicted by LDAPS as the initial and boundary conditions of the CFD model. We trilinearly interpolated the horizontal wind components of LDAPS to provide the initial and boudnary wind velocities to the CFD model. The trilinearly interpolated potential temperatures of LDAPS is converted to temperatures at each grid point of the CFD model. We linearly interpolated the horizontal wind components of LDAPS to provide the initial and boundary wind velocities to the CFD model. The linearly interpolated potential temperatures of LDAPS are converted to temperatures at each grid point of the CFD model. We validated the simulated wind speeds and directions against those measured at the PKNU-SONIC station. The LDAPS-CFD model reproduced similar wind directions and wind speeds measured at the PKNU-SONIC station. At 07 LST on 22 June 2020, the inflow was east-north-easterly. Flow distortion by buildings resulted in the east-south-easterly at the PKNU-SONIC station, which was the similar wind direction to the measured one. At 19 LST when the inflow was southeasterly, the LDAPS-CFD model simulated southeasterly (similar to the measured wind direction) at the PKNU-SONIC station.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2008.11a
• /
• pp.47-49
• /
• 2008

기상장 수치모의 결과 Case NGSST와 Case Default의 해수면 온도가 다르게 표현 되어 대상지역의 온도장을 변화 시켰고, 이에 따른 바다와 육지간의 온도경도 변화는 해풍 및 육풍의 침투 깊이를 변화 시켰을 뿐만 아니라 풍속의 변화에도 영향을 미쳤다. 이러한 기상장의 차이는 대기질 모의결과에도 영향을 미쳐 오존농도 분포의 차이로 나타났다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.435-436
• /
• 2003

경제 개발이 시작되면서 급속한 공업화와 산업 활동의 증가로 도시를 중심으로 하여, 대기는 해마다 오염도가 증가되어 왔으며, 최근에는 그 정도가 매우 심각한 상태에 이르게 되었다. 대기의 오염도는 배출원과 오염물질의 종류 및 특성에 따라 좌우되지만, 그때의 기상 조건과 지형에도 큰 영향을 밭는다. 그러므로 대기 오염 물질이 대기 환경에 어떠한 영향을 미치는가를 측정하고 수치 모의를 통해 예측하는 것이 필요하게 되었다. (중략)