• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.631-638
• /
• 2009

In this paper, a wide-band monopole antenna for use in PCS/WDCMA/Wivro/S-DMB(1.750${\sim}$2.655 GHz) band is presented. The presented antenna is a trapezoidal monopole antenna which has back-side patch and improves the bandwidth. To confirm the wide-band characteristics and radiation pattern of presented antenna, the experimental antenna is fabricated and its radiation characteristics are measured, compared with calculated results. It is shown that the designed antenna has VSWR less than 1.5, gain over 2 dBi in 1.73${\sim}$3.48 GHz. The measured results show good agreement with calculated results. From the result, we confirm that the designed antenna can be used indoor antenna for PCS/WCDMA/WiBro/S-DMB.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.245-253
• /
• 2020

In this study, natural frequencies are compared using several pile-soil interaction (PSI) models to evaluate the effects of each model on resonance safety checks for a monopile type of wind turbine structure. Base spring, distributed spring, and three-dimensional brick-shell models represented the PSIs in the finite element model. To analyze the effects of the PSI models on a natural frequency, after a stiffness matrix calculation and Winkler-based beam model for base spring and distributed spring models were presented, respectively; natural frequencies from these models were investigated for monopiles with different geometries and soil properties. These results were compared with those from the brick-shell model. The results show that differences in the first natural frequency of the monopiles from each model are small when the small diameter of monopile penetrates hard soil and rock, while the distributed spring model can over-estimate the natural frequency for large monopiles installed in weak soil. Thus, an appropriate PSI model for natural frequency analyses should be adopted by considering soil conditions and structure scale.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.10
• /
• pp.1261-1268
• /
• 2019

In this paper, we present the analysis of a novel monopole antenna with a reflector. The proposed monopole antenna is printed on a TRF-45 substrate, and the reflector, which is positioned near the base of the antenna, is printed on the FR-4 substrate. Positioning the reflector near the base of the antenna was found to suppress current radiation toward the back of the monopole antenna. Comparative analysis of the proposed monopole antenna and a conventional monopole antenna without a reflector revealed that the bandwidths of the antenna with and without a reflector were 2.65 GHz and 2.88 GHz, respectively. Additionally, the antenna without a reflector was observed to have a bi-directional radiation pattern in the E-plane, and an omni-directional radiation pattern in the H-plane. However, only the antenna with a reflector was found to suppress back radiation, and provide non-uniform directional radiation in the E-plane and H-plane.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.163-170
• /
• 2019

This study utilized the wearing test of subjects and a preference survey to determine wearing preference on types of blouses according to shoulder angle. The shoulder angles of the subjects were set as average shoulder, slopping shoulder, and square shoulder. The blouse sleeves were set as set-in, raglan, and kimono according to five domestic clothing construction books. A total of 15 blouses were made and tested by different bodices and sleeve types. The wearing test of subjects had the human subjects evaluate the appearance of the subject looking at the mirror while standing as well as evaluated the sensation test while not looking at the mirror. The preference survey was given to 100 females and was conducted using photos with combinations of three types of sleeves and shoulder angles in a survey under the same conditions. The average shoulder showed that set-in with the highest score in the wearing test was also preferred in the preference survey. The slopping shoulder evaluated the highest score in the wearing test by mirror; however, the preference survey showed that raglan was the most preferred choice. The squared shoulder showed that raglan with a high score in the wearing test by mirror was also preferred in the preference survey.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.6
• /
• pp.577-580
• /
• 2016

One of the effective jamming methods to disturb monopulse radars is a wavefront distortion. Most well-known wavefront distortion is the cross eye technique which uses two transmitters. The cross eye can make angle error regardless of monopulse radar structure but high accuracies of phase and amplitude between two transmitters should be needed to make large angle error. Thus, the accuracies of phase and amplitude are essentially required performance parameters for implementation of wavefront distortion systems and the required values of accuracy is dependant on amount of angle error. In this paper, we derive expressions for minimum required values of phase difference and amplitude ratio according to amount of angle error and analyze the results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.235-244
• /
• 2014

This paper describes the subarray channel configuration and calibration method for airborne AESA radar antenna. AESA radar demonstrator was designed and implemented for the digital beam-forming performance test of the 12 channel subarray structure. Magnitude and phase difference can be exist between the manufactured subarray channel. In this paper, calibration method for the subarray difference error was suggested. We measured digital monopulse slope in the subarray channel and verified the channel calibration effect. To verify the subarray channel operation, digital monopulse channel was compared with analog monopulse channel performance. AESA radar demonstrator was tested in the ground far field test range. Emulated single target was generated to test the detection and tracking performance of the demonstrator with the same waveform and search pattern. We verified that the detection and tracking performance of the 12 subarray digital monopulse channel was similar with the conventional analog monopulse channel. Also, ABF(Adaptive Beam-Forming) function for the sidelobe jammer was tested and effective operation was verified.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.32-37
• /
• 2003

For the reduction of electromagnetic biological effects from cellular phones, the electrical field radiation from cellular phone antenna is reduced by using partial ferrite material added on the phone case as ground plane. On the given properties (permittivity, permeability and conductivity) of ferrite material, the characteristics of monopole antenna is analysed depending on the variation of ferrite added configuration(thickness and shape). According to this analysis, the design method and direction to minimize the biological effects to human head is proposed in 1.7 GHz band PCS phones. For the exact analysis involving the permittivity, per-meability and conductivity of ferrite material, FDTD numerical method is used.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.173-176
• /
• 1998

스테레오 음향 반향 제거기에서 발생하는 주요한 문제점들은 모노 환경에서와는 다르게 반향 경로 시스템의 긴 임펄스 응답으로 인한 느린 수렴속도와 원단화자 주위의 환경변화에 의한 최적해의 변화 등을 등 수 있다. 이러한 문제점들을 극복하기 위해 본 논문은 전송실에서의 환경 변화에 의한 반향 제거 성능저하와 저속의 수렴속도 및 과다한 계산량의 문제점을 해결하기 위하여 본 논문에서는 전송실의 환경 변화에 강인하고 계산량을 줄일 수 있는 Hyper-plane projection 알고리듬을 이용한 의사 스테레오 음향 반향 제거기를 제안한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1031-1038
• /
• 2016

In the UAVs, the position error of the inertial navigation system is constantly increased when global positioning system goes wrong due to interference. It makes impossible to ensure mission and flight safety. If the data-link system provide the position of the UAV for inertial navigation system periodically, then the UAV may operate normally under malfunction of the global positioning system. In this paper, we introduce an algorithm for estimating the position of the UAV using the monopulse tracking and distance measurement of the line-of-sight data-link system. Also, we propose a method to improve the performance of position estimation. And we assured ourselves that this method can be applied in the UAVs.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.61-66
• /
• 2005

In this paper, we implemented a impulse generator, the one of the part in UWB(Ultra Wide Band) system using step recovery diode(SRD) and gain-switced semiconductor laser. The impulse generator was consisted of four stages; The first stage used SRD to generate the first impulse for gain switching. The second stage controled current for the suitable gain switching condition. The third was the second impulse generator to generate gaussian pulse. For gain switching, the first impulse was applied to semiconductor laser. In the last stage the gain switched impulse was converted into mono-gaussian pulse. The measured mono-gaussian pulse was 360 psec pulse-width and $-70mV \~ +50mV$ amplitude in time domain. In frequency domain its magnitude and bandwidth was, respectively, -41dBm and 3.6GHz. Accordingly, the impulse generator that we suggested was suitable for UWB systems.