• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.37-45
• /
• 2009

An objective of this study is to evaluate the structural performance of the weak axis SRC column-RC beam joints by experiments. Although one of common joint types is the connection with standard hooks, it has been required to examine its safety and to settle problems of the joint among practical engineers. Specimen types are classified into two categories, namely the type of standard hook and the type of shape improvement. The first one is consisted of three specimens which are reference type, development length modification type, and development length supplement type. Three specimens for shape improvement were made with variations on the arrangement of longitudinal reinforcements and the development length. Test results based on cyclic loadings were discussed with load-deflection curves, maximum strengths, strength degradations beyond the maximum. It was found that the standard hook types showed premature failures and consequent strength degradations due to splitting of joint concrete. However, satisfactory performance was obtained with the shape improvement type with wing-plate welding. No premature failures and strength degradations were detected with the specimens.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.866-876
• /
• 2003

Experiments were performed for the real sized 12 reinforced concrete columns of 350${\times}$350${\times}$3350 mm with normal concrete in order to observe the fire-damaged behavior of these columns. Columns were heated according to the ISO heating curve. Main experimental parameters were: magnitude of axial load, heating time, cover thickness, and eccentricity. Effects of these parameters on the axial expansion and contraction, rotation, buckling, ISO fire resistance, and structural stability were experimentally quantified. It has been observed that the contraction rate of axial deformation was affected mostly by the duration of heating time and buckling of reinforcement or member by the magnitude of axial load, duration of heating time, cover thickness and eccentricity in order. Based on the experimental observations, ISO fire resistance criteria were qualiatively criticized.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.4 s.71
• /
• pp.453-461
• /
• 2004

Since there are no specifications in Korea regarding the design of steel column baseplates that are subjected to concentric axial load, this paper proposes a more accessible stress design method for baseplates based on AISC specifications and guidelines.Some designs included in this paper were: (1) a full area ofconcrete bearing pressure under normal axial load and subsequent failure in external cantilevers at 0.95 d or 0.8 bf, and (2) a partial area of the pressure under a light axial load and subsequent failure as an internal cantilever model.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.1
• /
• pp.31-42
• /
• 2014

In this paper, concrete-filled steel tubular columns encased with precast reinforced concrete were studied. Four eccentrically loaded columns and a concentrically loaded column were tested to investigate the axial load-carrying capacity. The test parameters were the use of fiber reinforcement for cover concrete, eccentricity, column length, and lateral reinforcement. The maximum axial loads of the specimens agreed with the nominal strengths predicted by KBC 2009. However, in some specimens, the load carrying capacity quickly decreased after the peak strength due to spalling of the cover concrete.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.2
• /
• pp.83-90
• /
• 2009

The previous studies for dynamic behavior of spatial structure have been zoomed in on roof structure by numerical analytic method. But the roof structure of real spatial structures is supported by lower structure as column and wall. So, when earthquake is occurred, it is predicted that dynamic behavior of roof structure is affected by lower structure. Therefore, on this study, natural period characteristics of arch structures are analyzed according to section, length and the modulus of elasticity of brass column and polycarbonate column and additional mass of roof structure by the scale-down model of arch structure as the most simple structure of spatial structures. The changes of natural periods are generally alike. But, when Polycarbonate column is connected to roof structure, the change of natural period for change of section is relatively large. That means that change of section and section and length of column and additional mass of roof structure have less influence on change of stiffness because the modulus of elasticity of brass is relatively large.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.51.2-51.2
• /
• 2009

본 실험에서는 레이저 간섭 리소그래피를 이용한 2차원 나노 패턴을 형성하였고, 수열합성법을 이용하여 90 도에서 ZnO 나노 기둥을 ZnO/Si 기판 상에 제작 하였다. ZnO 버퍼층은 스퍼터를 이용하여 200도, Ar 분위기에서 증착 하였으며, 레이저 간섭 리소그래피를 이용하여 두 번의 노광을 통해 2차원 나노 패턴을 형성하였다. 먼저, 최적화된 포토레지스트를 ZnO/Si 기판 위에 도포하고, 2500rpm에서 30초간 스핀코팅 한 후, 첫번째 노광을 실시 하였고, ZnO/Si 기판을 회전시켜 첫번째 노광과 교차 시킨 다음 두 번째 노광을 통해 교차하는 부분만 현상되도록 하였다. 기판의 회전 및 기판과 입사 레이저 사이의 각도를 조절하여 제작된 나노 패턴의 종류는 square lattice, centered rectangular lattice, oblique lattice, hexagonal lattice, rectangular lattice, 5가지로, 2차원의 모든 격자를 제작 하였다. 저온 수열합성법에서는 Na citrate를 형상제어제 (surfactant ions)로 사용하여 ZnO 나노 기둥을 형성하였다. $NH_4OH$를 이용하여 용액의 pH를 조절하였고, Zn nitrate hexahydrate를 Zn의 원료 물질로 사용하였다. 2차원 나노 패턴의 3차원 형태는 Atomic force microscopy (AFM, Veeco instruments, USA)를 이용하여 접촉 모드에서 관찰하였고, ZnO 나노 구조는 주사 전자 현미경 (FE-SEM, Model: JSM-6701F, Tokyo, Japan) 를 통하여 분석 하였다. 나노 패턴의 AFM 분석 결과 ZnO/Si 기판상에 포토레지스트가 주기적인 배열을 가지는 것을 확인하였고, ZnO/Si 기판상에 포토레지스트가 완전히 현상된 부분이 일정한 배열을 가지는 것을 확인하였다. 포토레지스트가 현상되어 기판의 표면이 드러난 부분의 크기는 약 250nm로 측정되었다. ZnO 나노 구조의 FE-SEM 분석 결과, 각각의 나노 구조가 나노패턴 중 완전히 현상된 부분만을 통하여 성장되었다는 것을 확인하였고, 형상 제어제로 사용된 Na citrate의 첨가 여부에 따라 나노 구조의 모양이 변화되었다는 것을 알 수 있었다. Na citrate 가 첨가된 나노 기둥의 경우 약 500nm의 길이를 가지는 하나의 기둥 형태로 성장하였다는 것을 확인하였다.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.3 s.70
• /
• pp.355-363
• /
• 2004

In order to obtain the effective length factor of beam-column members of plane frames, this paper extensively used an alignment chart approach, based on the nomograph given in LRFD-AISC specification commentaries. However, it should be noted that various simplifications and assumptions were introduced in constructing the alignment chart. To overcome the practical limitations of the alignment chart, this paper proposes a simple but accurate procedure that determined the effective buckling length for stability design of main members of cable-supported bridges. This method requires the full system buckling analysis. The numerical examples showing the suitability of the present scheme are discussed and some conclusions are drawn.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.97-100
• /
• 2008

Subjected to seismic action causing large deformation of bridge columns, the plastic hinge region is commonly formed in the column end zone. The deformation capacity of a concrete column can be expressed by using plastic hinge length. The mechanical properties of high-strength reinforcing steel is different from that of normal-strength steel and the mechanical properties of steel will influence the plastic hinge formation. Therefore, in other to accurately predict the deformation of concrete column using high-strength steel, the plastic hinge length can be expressed as a function of the mechanical properties of steel such as the tensile to yield strength ratio and the strain at ultimate state. However, little research has been conducted into the effect of mechanical properties of steel on the plastic hinge length. It was difficult to measure the plastic hinge length from the test results. Therefore, the plastic hinge length of concrete columns was investigated from the curvature profile. A numerical approach was used to study the effect of various parameters on plastic hinge length. Based on the results of the numerical parametric study, a new expression for plastic hinge length was proposed.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.257-266
• /
• 2006

Flat-plate building systems are utilized extensively for construction of apartments, hotels and office buildings because of short construction period, low floor-to-floor height and flexibility in plan design. Recently, to increase lateral seismic resistance of flat-plate building systems, wall-columns are used frequently. Therefore, to estimate strength of flat-plate column connection accurately, the effect of column section shape on the behavior of flat-plate column connection should be considered properly, In the present study, a numerical analysis was performed for interior connections of continuous flat-plate to analyze the effect of column section shape. For the purpose, a computer program for nonlinear FE analysis was developed, and the validity was verified. Through the parametric study, the variations of shear stress distribution around the connection were investigated. According to the result of numerical analysis, as the length of the cross section of column in the direction of lateral load increases, the effective area and the maximum shear strength providing the torsional resistance decrease considerably. Therefore, these effects should be considered properly to estimate the strength of flat-plate connection accurately.

• Journal of the Speleological Society of Korea
• /
• v.20 no.21
• /
• pp.8-33
• /
• 1989

한국 제주도의 만장굴은 세계의 기록에 의하면 총연장 길이가 세계 용암 동굴계(System)에서 제 1 위에 있다. 만장굴은 세계적인 용암 동굴의 자연사박물관이라고 말할 수 있다. 세계적이고 자랑할 물을 가진 만장굴은 이용ㆍ보존ㆍ안전성ㆍ보존성의 대책을 세울수 있는 자료가 부족하고 있다.(중략)