• Journal of Digital Convergence
• /
• v.12 no.9
• /
• pp.193-199
• /
• 2014

In the application development process is an important task to improve the quality of the data is the principal means for achieving the functional requirements of the wireless sensor network applications because it is the data obtained in the real world. It should be possible to meet the requirements for the quality improvement to those detailed for improving the quality in a short period of time for developing a prototype of an application and low cost. However, development of the existing methods can not be satisfied simultaneously in order to use a consistent abstraction because antinomical relation between ability of description and ease of description. In this paper, we propose a meta-data designed to support the improvement of data quality through abstract modeling language is also used in combination to a multiple of the other.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.47-54
• /
• 2015

Recently, rapid urbanization and industrialization had increased the air pollution in major cities by increasing the fuel consumption. Air pollution models have been widely used for air quality management in many countries. Also, a lot of related studies have been conducted using air dispersion models. In this study, The meteorological preprocessing program was developed to convert the korea meteorological data to the U.S. meteorological data and to expand the usability of air dispersion models of U.S. EPA. In addition, the usability evaluation was carried out through a case study. In the results of the evaluation of the program, this program was accurately convert the Korea meteorological data to the U.S. meteorological data, and the prediction was carried out without a error in air quality modeling. Therefore, the program showed a high utilization as meteorological data pre-processing tool.

• Journal of the Korean Geographical Society
• /
• v.36 no.3
• /
• pp.278-291
• /
• 2001

This paper is to build a spatial decision support system designed to solve problems relevant to the decision-making for retail center locations. For construction of the system this paper discusses the primary procedures of spatial modeling and issues of data, which are required for integrating spatial interaction models to GIS having capability of managing, analyzing and visualizing spatial data sets. Lexington, Kentucky, is selected as a case study to implement the spatial decision support system based on the spatial modeling module. This system for retail center locations is useful of estimating the catchment areas more accurately and analyzing resultant flow patterns. And this system can make spatial analysis efficiently for what-if scenarios such as an intended retail center or changing demand. The benefits of adopting this system allow the decision makers to plan the investment strategies and search for stable market structure.

• Journal of the Korean Geographical Society
• /
• v.43 no.2
• /
• pp.220-234
• /
• 2008

In many security monitoring contexts, the performance or efficiency of surveillance sensors/networks based on a single sensor type may be limited by environmental conditions, like illumination change. It is well known that different modes of sensors can be complementary, compensating for failures or limitations of individual sensor types. From a location analysis and modeling perspective, a challenge is how to locate different modes of sensors to support security monitoring. A coverage-based optimization model is proposed as a way to simultaneously site k different sensor types. This model considers common coverage among different sensor types as well as overlapping coverage for individual sensor types. The developed model is used to site sensors in an urban area. Computational results show that common and overlapping coverage can be modeled simultaneously, and a rich set of solutions exists reflecting the tradeoff between common and overlapping coverage.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.2
• /
• pp.18-25
• /
• 2008

The traditional a roaches to software development, such as XP, UP, CBD and other CASE tools, are useful for constructing various software components. However, they are not designed to face the challenges of open environments that focus on service. The Service-Oriented Architecture(SOA) is a component architecture that interconnects an application's different functional units, called services. SOA provides a good way to integrate the business process through well-defined interfaces and contracts between business services. In this paper, we propose a method of business process modeling based on SOA with a P2P approach. Also, A P2P business process modeling system is presented. This, results in admitting the reality of enterprise that changes on the basis of services, and suggests more efficient and visual direction for the process integration between enterprises.

• Journal of Korean Society of societal Security
• /
• v.2 no.2
• /
• pp.63-68
• /
• 2009

Seismic design of newly built bridges can be considered and carried out during construction process according to the revised road bridge design standard issued recently. While for the existing reinforced concrete bridge priers under service before new standard implements, their resistance capacity against lateral seismic loading is inferior. In this research, seismic reinforcing for existing bridge piers by nickel-chrome alloy bar has been analyzed. Based on the established model by MIDAS program, the behaviors of bridge piers including deformation and stress with and without nickel-chrome alloy reinforcing bars have been compared and discussed under lateral seismic loading. And the advantages of using nickel-chrome alloy bar as seismic reinforcement over other materials, such as good performance, good economy etc. have been demonstrated by comparison with other researches. Also the anti-seismic efficiency of nickel-chrome alloy reinforcing bars has been confirmed by MIDAS modeling analysis.

• Journal of the Korean Society for Library and Information Science
• /
• v.47 no.4
• /
• pp.315-334
• /
• 2013

This study performs opinion mining of newspaper articles, based on topics extracted by topic modeling. We analyze the attitudes of the news media towards a major issue of 'presidential election', assuming that newspaper partisanship is a kind of opinion. We first extract topics from a large collection of newspaper texts, and examine how the topics are distributed over the entire dataset. The structure and content of each topic are then investigated by means of network analysis. Finally we track down the chronological distribution of the topics in each of the newspapers through time serial analysis. The result reveals that both the liberal newspapers and the conservative newspapers exhibit their own tendency to report in line with their adopted ideology. This confirms that we can count on opinion mining technique based on topics in order to analyze opinion in a reliable fashion.

• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.147-153
• /
• 2010

Cut-off wall with a low permeability can be constructed to prevent groundwater seepage in spillway tunnel areas. Three spillway tunnels are constructed in Im-ha multipurpose dam region and three types of cut-off walls with a variety of directions and scales are designed. As a result of MODFLOW modeling to assess the effect of cut-off wall for three types, groundwater inflows to the tunnels range from 64.26 $m^3/day$ to 65.49 $m^3/day$ and also they through a cut-off wall section from a reservoir do from 44.08 $m^3/day$ to 45.31 $m^3/day$ and it does not show any significant difference among them. Therefore, a construction process and an environmental conservation rather than the effectiveness of cut-off wall need to be considered to select the best cut-off wall in this region.

• The Journal of the Convergence on Culture Technology
• /
• v.3 no.3
• /
• pp.31-36
• /
• 2017

We are made up to the variation of the structure modeling of the stratum corneum by the skin on the hydration. The given skin structure is consist of the control level of the intercellular route and transcellular route, and is confirmed to the variation of the modeling for algorithm. Hydration condition is consisted to modeling by the size, form and combination, that skin impedance is appeared to result the value of measurement by the several layer such as forms of ${\xi}-R-SC-RH$, ${\xi}-R-SL-RH$, ${\xi}-R-SG-RH$, ${\xi}-R-SS-RH$ and ${\xi}-R-SB-RH$. Hydration condition is showed to the alteration difference value of S-Corneum, S-Lucidum, S-Granulosum, S-Spinosum and S-Basale. And, composition condition was constructed with the alteration modeling that was established to separate the division parts for conversion system. We will be possible to progress the improvement effectiveness of the skin and to consist of the continuous hydration control system for functional on the skin. We will be possible to progress the improvement effectiveness of the skin and to consist of the continuous penetration control system for functional energy on the skin.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.543-547
• /
• 2004

Visualization of construction process simulation and physical modeling were considered to overcome the limitations of current graphical simulation. The output of discrete-event simulation programs which are the most common mathematical statistical simulation tool for construction processes were analyzed for the visualization of earthmoving process that dealing with objects without fixed. Object-oriented models for equipment, material and work environments were devised to effectively visualize the numerical simulation results of the working time, the queuing time as well as the amount resources etc. The oscillation of the crane's cable and the lifted material that should be considered to rationally modeled and simulated by construction graphical simulation. The derived equation of motion was solved by numerical analysis procedure. Then obtained results was used for physical modeling.