• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.369-379
• /
• 2006

Objective: The purpose of this study was to find changes in the occlusal plane related to different vertical facial patterns and suggest treatment goals and conduct possible treatment mechanisms. Methods: 60 adult patients (28 males, 32 females) who had been diagnosed as Class 1 skeletal malocclusion and treated without extraction were selected. Patients were divided into three groups; short face type (group 1), average face type (group 2) and long face type (group 3), using the data on normal occlusion of Korean adults. Results: The results were achieved by analyzing cephalometric tracings of each group at pre-treatment, end-treatment and post-treatment (about 1 year recall check). The inclination of the occlusion plane tends to gradually increase as the face becomes longer In group 1, COP-X, FOP-X, L6/L1, MP-L6 were significantly decreased, and L1-FOP was significantly increased during the retention period (T3-T2). Group 2 showed no significant change, In group 3, FOP-X was significantly increased during the retention period (T3-T2). During the retention period, FOP-X showed significant change among each group, especially between group 1 and group 3. Conclusion: These results suggest that changes of occlusal plane inclination according to facial vertical pattern need to be considered during the retention period for intrusion, extrusion, and incisor overbite.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.182-188
• /
• 2019

A proper vertical dimension and a harmonious occlusal plane are essential to satisfy a patient esthetically and functionally. A maxillomandibular occlusal vertical dimension is determined by the elevators which repeatedly contracts to a certain length, and a tooth location is determined by a maxillomandibular vertical dimension. The patient of this case came in with the incongruity of the lips and the occlusal plane. The result of clinical test showed the lack of length of the lower anterior due to the reduction of vertical dimension, the deep overbite of anterior, the excessive attrition of anterior, and the incongruity of occlusal plane. After the diagnostic wax-up, the temporary restoration was installed, and final prosthesis was installed after 6 months. As a result, the patient obtained a functionally and esthetically satisfying result.

• The korean journal of orthodontics
• /
• v.37 no.4
• /
• pp.260-271
• /
• 2007

The purpose of this study was to evaluate the relationships between the occlusal plane angle and craniofacial skeletal pattern in relation to anterior overbite. Methods: Lateral cephalograms of 90 adults with skeletal class III malocclusions were traced and measured to analyze skeletal factors and occlusal plane angles. In terms of anterior overbite, all patients were classified into 3 subgroups of positive overbite, edgebite, and negative overbite groups. All measurements were evaluated statistically by ANOVA and Duncan's Post Hoc, and correlation coefficients were evaluated among measurements. Results: In this study, some skeletal measurements (saddle angle, articular angle, Y axis, AFH, SN-FH, SN-Mn, FH-Mn) showed a significant difference among the 3 groups in relation to overbite changes. Correlation coefficient showed that PFH/AFH, SN-Mn, Mx-Mn, and FH-Mn showed a significant difference with FH-Occ, Mx-Occ, and Mn-Occ. Regression analysis showed that Mx-Mn had a determination coefficient of 0.714, 0.560, and 0.677 in relation to FH-Occ, Mx-Occ, and Mn-Occ, respectively. Conclusion: This study suggests that consideration of the occlusal plane in relation to the maxillomandibular vertical skeletal state enable the establishment of a more predictable orthognathic surgery result.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.4
• /
• pp.451-457
• /
• 2016

Prosthodontic decision-making process is done through analysis of clinical information and mutual communication between patient and dentist. When opposing teeth are extruded due to missing tooth or tooth defects, selection of appropriate treatment plan and predictory prognosis can be complicated in functional rehabilitation. In case of severely disharmonious occlusal plane result from extruded teeth, re-establishment of the occlusal plane is required, if necessary via prudent evaluation. In this case, class III patient had unesthetic appearance and mastication discomfort caused by disharmonious occlusal plane due to severe extrusion. Through a structured diagnostic process, appropriate treatment plan was selected. Esthetic and functional results were obtained through from full mouth rehabilitation with re-establishment of the occlusal plane.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.44-54
• /
• 2023

In order to manufacture functional and esthetic prostheses, it is essential to accurately transmit information about the patient's occlusal plane. In particular, in the case of a completely edentulous patient, the occlusal plane is very important to correctly support the soft tissue, to achieve aesthetic harmony with the facial appearance, and to properly pronounce it, and to form a balanced occlusal relationship for stable mastication. In the conventional method, various facebow systems were used to transmit patient's information from the clinic to the laboratory, but there were several limitations in the process of transferring them to CAD. To simplify this process, a prefabricated POP (PNUD Occlusal Plane) Bow system was recently developed. In this case, a CAD-CAM (Computer-aided design-computer-aided manufacturing) treatment dentures reflecting the patient's occlusal plane information was manufactured using the POP Bow system during the treatment of a completely edentulous patient, and aesthetic and functional satisfaction was obtained.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.263-275
• /
• 2022

The loss of posterior occlusal support leads to further complications such as collapsed occlusal plane and reduced vertical dimension, and it may cause problems such as facial appearance change, reduced chewing efficiency, and temporomandibular joint disorders. In such case, it is necessary to re-establish occlusal plane and vertical dimension properly through accurate diagnosis and predictable treatment plan. This case report presents a 71-year-old female, whose occlusal plane was collapsed and posterior restorative space was insufficient. To perform a patient-friendly full mouth rehabilitation, proper vertical dimension and occlusal plane were decided by evaluation of interocclusal space at her physiologic mandibular rest position, swallowing, pronunciation, facial appearance, and the average length of anterior teeth. And then, the fixed provisional restorations were fabricated with the new occlusal position, and evaluated for 5 months with checking adaptation of masticatory muscles and any kind of clinical symptoms occurs or not. After confirmation of functional stability and esthetic satisfaction with the newly established occlusion, final definitive restorations were fabricated and inserted in the mouth. Through the above process, the treatment result was functionally and aesthetically satisfactory.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.214-223
• /
• 2016

Implant-assisted removable partial denture (Implant-assisted RPD, IARPD), posterior edentulous extension areas of which obtains additional support and retention from implants, is attracting increasing interest. This case report presents a successful treatment on a partially edentulous patient with a severely canted occlusal plane resulted from a long-term use of posterior extended RPD. The full mouth was rehabilitated through a fixed prosthesis on maxilla and IARPD with zirconia occlusal surface on mandible, which allowed to achieve an esthetic occlusal plane with long-term stability and, ultimately, functionally satisfying outcome.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.2
• /
• pp.141-153
• /
• 2018

A non-physiological occlusal plane caused by continuous tooth loss, occlusal wear, and failure of a prosthesis may result in an unattractive appearance and functional problems, such as reduced masticatory efficiency and occlusal interference. Therefore, when undertaking prosthetic treatment for edentulous patients or patients with a collapsed occlusal plane, it is important to establish an occlusal plane that is compatible with masticatory function. The patient in this case report had undergone restoration of a completely edentulous maxilla using an implant-supported fixed prosthesis. On follow-up examination in the following 6 years, mechanical complications were observed in the existing implant prosthesis, including porcelain chipping, occlusal wear, and screw loosening. Moreover, due to occlusal wear and supraeruption of the opposing anterior teeth, as well as loss of some posterior teeth, the occlusal plane had collapsed. Following diagnosis, the patient underwent full mouth rehabilitation, involving additional implant installation in edentulous sites, recreation of the existing prosthesis, and prosthetic restoration of all remaining teeth.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.239-249
• /
• 1999

In orthognathic surgery to obtain proper functional and esthetic form after skeletal discrepancy treatment, precise diagnosis and treatment plan are essential. Especially in two jaw surgeries that have serious upper and lower jaw problems, maxilla and mandible are arranged in three dimensions. Based on the maxillary rearrangement, mandibular sagittal and transverse positions are determined, and thus new occlusal plane is established. The object of this study is to evaluate the stability of the indiviual ideal occlusal plane based on the architectural and structural craniofacial analysis of Delaires. The subjects of this study were 48 patients who underwent two jaw surgeries, and they were equally divided into two groups, A and B. A group was operated with ideal occlusal plane and B group was not. Two groups were compared at the preoperative, immediate postoperative (average 4.3days), and long-term postoperative (average 1.3years) lateral cephalometric radiographs. The following results were obtained: 1. ANS was lower than that of PNS for both A and B after the surgery. That is, maxilla and mandible are rotated in posterior and superior direction. 2. Significances were found between $T_2$ and $T_3$ for both A and B are HRP-Me at vortical measurements, articular angle(p<0.01), gonial angle(p<0.01), and Mn. plane angle(p<0.05) at angular measurement. Mn. plane angle is increased at HRP-Me is decreased for both A and B. 3. There is no significance in skeletal stability aster the surgery between group A and B. 4. Horizontal movements of B and Pog by surgery have statistically significant inverse correlations with horizontal relapse of B and Pog, and vertical relapse of PNS, as well as Mn. Plane angle, and gonial angle after the surgery.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.237-253
• /
• 1998

Surgical-orthodontic treatment is performed for the skeletal Class III patients with no remaining growth and too big a skeletal discrepancy (or camouflage treatment, and two jaw surgery is needed in order to have maximum effect in such patients. In two jaw surgery cases, surgical alteration of the occlusal plane is necessary to establish optimal function, esthetics and postoperative sability, therefore the establishment of the occlusal plane is essential in diagnosis and treatment. The object of this study is to evaluate the stability of the indiviual ideal occlusal plane bsaed on the architectural and structural craniofacial analysis of Delaires. Thus, the subjects of this study were 48 patients who underwent two jaw surgery, and divided in two groups. Each group were composed of 24patients, A group were operated with ideal occlusal plane and B group were not. Two groups were compared at the preoperative, immediate postoperative (average 4.3days), and long-term postoperative (average 1.3years) lateral cephalometric radiographs. The following results were obtained: 1. There was no significance in occlusal plane angulation between $T_2\;and\;T_3$. Average long term follow-up changes of occlusal Plane angle were $0.24^{\circ}{\pm}2.43$, with FH plane and $0.15{\circ}{\pm}2.16{\circ}$ with SN plane in all 48 patients. These results demonstrated that the occlusal plane after two jaw surgery in skeletal Class III malocclusion was stable. 2. There was no significance in postoperative stability of occlusal plane between A and B group. 3. There was no significance in postoperative stability of occlusal plane depending on surgeon and operative method within each group. 4. The postoperative changes of occlusal plane were correlated to the postoperative changes of jaw rather than tooth position. 5. There was no correlation between the postoperative changes of occlusal plane and maxillary impaction and mandibular setback with surgery.