• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.19-24
• /
• 1999

A two dimensional thermo elasto-plastic finite clement stress analysis was performed to study stress distributions in functionally gradient material. The upper $ZrO_2$ surface is heated at 1200K until a steady state is established and cooled at 300K. The influences on the thermal stress distributions due to the difference of compositional gradient exponent p were investigated. In this study, we obtained the thermal stresses are low for p=1.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.125-125
• /
• 2011

티타늄 화합물은 뛰어난 물리적 특성과 인체 무해성을 가지고 있어 생체, 내식 및 내마모 재료 등에 널리 응용되고 있으며, 금(gold)색의 색상 구현을 통해 미적 기능성 향상을 위한 표면처리 분야에도 많은 관심을 받고 있다. 본 연구에서는 아크 방전법을 이용해 밀착력이 우수한 다층 TiN 박막을 제조하고 미세조직 변화에 따른 특성을 알아보고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.3
• /
• pp.439-446
• /
• 1997

A traditional notion of composites has been composed as a uniform dispersoid, but now it is proposed without regard to such rule with process development. Functionally Graded Material(FGM) consists of a new material design that is to make intentionally irregular dispersion state. In this study, thermal stress analysis of plasma spraying PSZ/NiCrAlY gradient material was conducted theoretically using a finite-element program. A formations of the model are direct bonding material(NFGM) and FGM with PSZ and NiCrAlY component element. The temperature conditions were $700^{\circ}C$ to 1100.deg. C assuming a cooling-down precess up to room temperature. Fracture damage mechanism was analyzed by the parameters of residual stress.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1571-1579
• /
• 1997

The development of a new material which should be continuously use under severe environment of very high temperature has been urgently requested. For the development of such super-heat resistant materials, the main problem is not only to make the superior thermal barrier properties but also to actively release thermal stress. So, a new concept of functionally graded material(FGM) has been proposed to overcome this problem. A composition and microstructure of FGM are varied continuously from place to place in ways designed to provide it with the maximum function of mitigating the induced thermal stress. So, FGM can be applied in the aerospace, the electronic and the medical field, etc.. In this study, thermal stress analysis of sintering PSZ/NiCrAlY graded material was conducted theoretically using a finite-element program. The temperature condition was sintering temperature assuming a cooling-down process up to room temperature. Fracture damage mechanism was anlayzed by the parameters of residual stress. It could be known that FGM provided with the function of mitigating the induced thermal stress.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.88.2-88.2
• /
• 2012

활성 물질의 원활한 확산을 위한 경사형 마이크로 기공과 넓은 반응 면적을 제공하는 나노 기공을 동시에 가지는 하이브리드 다공성 구리의 전기화학적 합성법이 보고된 이후, 이를 기능성 전기화학 장치에 활용하기 위한 많은 연구가 진행되고 있다. 하지만, 구리는 일반적으로 전기화학적 비활성 물질이기 때문에 전극 활물질로서 직접 활용되는 것은 극히 제한적이다. 또한, 전해 도금에 의하여 합성되므로 비전도성 기재 위에 형성이 불가능하여, 비전도성 기재가 기본이 되는 장치에 적용하는 것 역시 어렵다. 본 연구에서는 전해 도금법을 기본으로 하여 마이크로-나노 하이브리드 다공성 구조를 가지는 니켈을 전도성 및 비전도성 기재 위에 형성하였다. 전도성 기재 위에 제조된 니켈의 구조는 전반적으로 기존의 다공성 구리와 거의 유사하였으나 마이크로 기공의 밀도와 수지상의 형태에 있어 차이점을 보였다. 비전도성 기재 위에 형성된 니켈의 경우에는 중간 열처리 과정으로 인해 나노 수지상 구조의 다소간의 뭉침이 발견될 뿐 전도성 기재 위에 형성된 니켈과 구조가 동일하였다. 전도성 및 비전도성 기재 위에 형성된 니켈 다공성 구조를 기본을 하여 각각 전기화학적 캐패시터용 전극과 연료전지용 전극을 제작하였고, 기본적인 전기화학 특성을 파악하여 니켈 다공성 구조의 응용 가능성을 타진하였다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.12 no.2
• /
• pp.17-28
• /
• 2004

In unmanned aerial vehicle (UAV), the high temperature results from friction with the air, combustion of fuel and combustion gas of a nozzle etc. It causes serious problems in the UAV structure. The characteristic analysis of heat resistant metal and ceramic materials and creep analysis for the functionally graded material (FGM) is presented in this paper. FGM is composed of two constituent materials that are mixed up according to the specific volume fraction distribution in order to withstand high heat condition. In addition, the creep behavior of FGM applied in duct structure of an engine is analyzed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2089-2095
• /
• 2002

Ceramic/metal composites have many attractive properties and great potential fur applications. Interfacial fracture properties of different layered composites are important in material integrity. Therefore, evaluation of fracture toughness at interface is required in essence. In this study, the mechanical characteristics for interface of ceramic/metal composites were investigated by indentation test of micro-hardness method. Apparent interfacial toughness of TBC system could be determined with a relation between the applied load and the length of the crack formed at the interface by indentation test.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.4
• /
• pp.26-34
• /
• 2008

This article provides a comprehensive treatment of cracks in non-homogeneous structural materials such as functionally graded materials (FGMs). It is assumed that the material properties depend only on the coordinate perpendicular to the crack surfaces and vary continuously along the crack faces. By using laminated composite plate model to simulate the material non-homogeneity, we present an algorithm for solving the system based on Laplace transform and Fourier transform techniques. Unlike earlier studies that considered certain assumed property distributions and a single crack problem, the current investigation studies multiple crack problem in the FGMs with arbitrarily varying material properties. As a numerical illustration, transient thermal flow intensity factors for a metal-ceramic joint specimen with a functionally graded interlayer subjected to sudden heating on its boundary are presented. The results obtained demonstrate that the present model is an efficient tool in the fracture analysis of non-homogeneous material with properties varying in the thickness direction.

• 기계와재료
• /
• v.23 no.1
• /
• pp.60-69
• /
• 2011

지면 변화 트레드밀 기기는 경사도 변화가 가능하며 안전사고를 예방하는 안전장치, 노인의 보행속도에 적합한 속도를 구현할 수 있는 자동 속도 구현장치, 기존 트레드밀에서 구현하지 못하는 다양한 지면 조건을 현실화할 수 있는 재질의 바닥 및 가상현실 컨텐츠와 연동하여 속도 조절이 가능한 지능형 조절장치로 구성된다. 때문에 가상의 외부 환경이 3D로 구현된 컨텐츠와 연동하여 노인들이 걷기 운동을 즐길 수 있도록 구현 가능한 것이 특징이다. 본 고에서는 노인 및 장애인들에게 적합한 속도 구현과 안전사고 예방 및 다양한 지면 조건을 구현한다는 장점이 있는 지면 변화 트레드밀 기기에 대해 소개하였다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.279-283
• /
• 2004

Thermal postbuckling and vibration analyses of functionally graded plates (FG plates) are performed. The nonlinear finite element equation based on the first-order shear deformation plate theory is formulated for the FG plate. The von Karman strain-displacement relation is used to account for the thermal large deflection. The incremental method considering the effect of the initial deflection and the initial stress is adopted for temperature-dependent material properties of functionally graded materials. The numerical result shows characteristics of the thermal postbuckling and vibration of FG plates in the pre- and post- buckled regions.