• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.10 s.253
• /
• pp.1293-1297
• /
• 2006

In this paper, kinematic analysis of a double-action link-type die set for enclosed die forging is carried out. The structure of the die set and its operational principle during enclosed die forging are introduced in detail. A closed-form solution of the relative velocity of the middle plate with respect to the upper plate after the upper and lower dies are enclosed is given in terms of the link lengths and the distance from the lower pin to the upper pin of the link system. The effect of the link lengths on both strokes and velocities is investigated. It has been shown that the relative velocity of the middle plate with respect to the upper plate varies almost linearly with the stroke of the upper plate.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1252-1264
• /
• 1988

Recently industrial robots together with positioners are often used to enhance the system performance for arc welding. In this paper, a redundancy control method is proposed to the robot-positioner system with seven degrees of freedom, where one kinematic modelling technique is employed. Also, manipulability in the given cutting plane of the workspace. An algorithm maximizing the manipulability is applied to the robot and the positioner and the simulation results are shown for the task following a linear path.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.107-110
• /
• 2004

이족 로봇은 기존의 바퀴로 움직이는 로봇에 비해 더 큰 이동성을 가지고 있다. 하지만 현실적으로는 쉽게 넘어지는 경향이 있어서, 보행시 동적인 안정성을 확보해야 할 필요성이 있다. 하지만 이를 위한 기구학적 해석이나 동역학적 해석이 너무 난해하다는 단점이 있다. 본 논문에서는, 이족 로봇의 동적 보행에 있어서 안정성을 확보하기 위해 퍼지 모델을 설계하고, 시뮬레이션을 실현함으로써 본 논문에서 제안된 보행 알고리즘이 실현가능한 것임을 확인한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.500-505
• /
• 2007

Current humanoid robot technology has a problem of lacking opened methodology about mechanisms of analysis, design, implementation, and integration for robot development but is focused only on manufacture robot and implementation of technology. In this paper, to overcome problems of humanoid robots that have been shown since and for construction of new structure which satisfy the concept of opening, networking, and modularization that is the development direction of future robot, we proposed morphological and neurological model of human arm and design method of humanoid robot arm based on the each joint design and kinematics model.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.10a
• /
• pp.77-78
• /
• 2011

한국해양연구원에서 개발 중인 Crabster 로봇팔을 기구학적으로 분석하고, 속도기구학을 매트랩을 이용하여 작업공간에 대해서도 분석 및 해석을 완료하였다. 운용자와 Crabster 로봇팔의 움직임을 고려해 개념 설계한 인간팔 크기의 7축 마스터 암 및 그립퍼의 기구부에 대해 2D 및 3D의 도면을 완성하였고, 마스터 암에 적용할 모터의 사양과 각 관절에 피드백 된 힘을 반영하기 위한 구동 모터의 엔코더를 이용한 위치 센서, DSP2812를 이용한 제어 명령 입력 장치와 구동 모터 드라이버를 포함한 마스터 - 슬레이브 시스템의 개념 설계를 완성하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.464-472
• /
• 2006

This paper presents the two degree-of-freedom (DOF) planar parallel mechanism, called the $2{\underline{R}}RR-RP$ manipulator, whose degree-of-freedom is dependent on an additional passive constraining leg connecting the base and the platform. First, the kinematic analysis of the mechanism is performed: the inverse and forward kinematic problems are analytically solved, the workspace is systematically derived, and all of the singular configurations are examined. Then, in order to determine the geometric parameters the optimization of the mechanism is performed considering its dexterity, stiffness, and space utilization. Finally, the kinematic performances of the optimized mechanism are evaluated through the comparison study to the conventional 5-bar parallel manipulator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.73-80
• /
• 2019

In this paper, the basic design of the electric hydraulic sliding deck system was developed to develop the electric hydraulic sliding deck which can easily upgrade the loading and unloading of the agricultural machinery by modifying the load of the existing 5ton cargo truck. Through the kinematic analysis, The length and structure of the specimens were designed and the materials were selected for safety and economical efficiency through structural analysis. For the basic design of the sliding deck system, we surveyed the agricultural machinery to be transported and selected necessary elements. And have devised a system using a hydraulic cylinder that can meet selected factors. Through the simplified modeling and kinematic diagram, the operating structure of the sliding deck system was grasped and the minimum length and structure of the sliding deck were devised, In order to select the sliding deck material satisfying, four representative materials used in the automobile structure were selected. Selected the parts to be analyzed and compared the stresses and deformation amounts according to the material under the conditions of maximum load through simplified modeling. As a result, SS41P material was used to reduce the unit cost and to achieve safety. The winch system was designed and applied for moving up and down of the farm machinery which can not be operated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.4
• /
• pp.422-434
• /
• 1997

In this paper, a two-stage kinematic optimal design for a 3 degree of-freedom (DOF) excavator subsystem, which consists of boom, arm and bucket, is performed. The objective of the first stage is to find the optimal parameters of the joint-actuating mechanisms which maximize the force-torque transmission ratio between the hydraulic actuator and the rotating joint. The objective of the second stage is to find the optimal link parameters which maximize the isotropic characteristic of the excavator subsystem throughout the workspace. It is illustrated that kinematic/dynamic performances of the kinematically optimized excavator subsystem have improved compared to those of original HE280 excavator, with respect to three performance indices such as maximum load handling capacity, maximum velocity capability, and acceleration capability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.201-204
• /
• 2008

The mobile robot is known as a nonlinear system with constraints. The general tracking controller for the mobile platform has been divided into the kinematic and the dynamic controller. The reason of dividing controller is the constraints. We can get some information through some numerical experiments. When the reference linear and angular velocity were given, the stability of mobile robot without the kinematic controller depend on the start point of reference cart. Therefore this paper composed of two controller for solving tracking problem. The main controller is the dynamic controller which used generally such as the PID controller. And this paper adopts the auxiliary controller in order to compensate the difference of initial point between the reference cart and a mobile robot. Finally, the numerical experiment is performed in order to show the validity of our method.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.417-420
• /
• 2009

본 논문에서는 유니버설 조인트의 기구학적인 해석을 위하여 원동축이 평면 내에 존재할 경우와 그렇지 않은 경우에 대하여 종동축의 속도를 관찰하였다. 평면 내의 경우는 기존 이론값과 동일하나 평면 외의 경우는 유한회전의 순서에 따라서 독립적인 결과값을 가지게 된다. 이는 오일러 각의 순서를 달리하면 표현되는 속도가 다르기 때문이며 이러한 단점을 극복하기 위하여 원동축에 4원법을 적용하였다. 수치 예제를 통하여 기존의 방법과 제시한 방법을 비교하여 제시한 방법이 일관성 있는 결과를 제공함을 확인하였다.