• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2350-2352
• /
• 2002

1970년대에 제작되어진 전기기관차는 대부분이 기계적인 방식을 많이 채택하였고 디지털 기술의 미비로 아날로그방식을 이용해서 DC모터나 브레이크 기기 등을 제어했다. 이들 장치들은 고장의 판단 여부를 외관이나 릴레이의 접점이 on/off 되었는지를 시각적으로 확인한 후 판별 하였고 또한 이러한 고장을 찾는다 하더라도 고장의 원인이나 고장난 부분을 찾아낸다는 것이 매우 어려웠다. 또한 기관차의 운행 기록을 할 수 없기 때문에 기관차의 운행시 주변 상황이나 시스템의 운용 상황들을 알 수 없었다. 따라서 본 시스템을 이용하여 기관차의 운행 도중에 발생되는 모든 상황을 디스크에 기록하며 또한 디스크의 내용을 분석할 수 있도록 하여 운행 중에 고장이 발생하면 고장 시점부터 시스템과 주변상황들을 기록하여 기관차를 검수하는 검수원들이 보다 빠르고 효과적으로 기관차를 분석하고 고장을 진단하여 기관차를 유지보수 할 수 있도록 전기기관차의 모니터링 시스템을 개발하였다.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.488-497
• /
• 2010

8100 series Electric locomotive was imported from SIEMENS of Germany on 2001. 8100 series model is modified from BR152 model to be complied with national environment. After 8100 series Electric locomotive carried out main line test for long time, 8200 series Electric locomotive produced in 10 locomotives with improvement and supplement on some parts. the one of supplement is to install the HEP equipment. In paper, about total harmonic distortion of HEP equipment power, it compares the result of combination with the result of actual measurement. It checks whether the measurement meets the specification of design or not. And it describes international standard about total harmonic distortion of supply system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.377-382
• /
• 2018

In order to partially localize the electric locomotive(8200 series) currently being operated, analysis of the inter-device MVB protocol in the electric locomotive should be performed first. Especially, it is necessary to analyze the operation when a newly developed auxiliary power supply is applied. In this paper, when a new auxiliary power supply applied to a conventional electric locomotive through a newly developed communication control unit using the analyzed protocol, a protocol for a failure codes was analyzed.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.03a
• /
• pp.70-73
• /
• 1998

본 연구에서는 광양제철소에서 철광석과 코크스를 이용하여 용선을 생산하는 고로공장과 이러한 용선을 용강으로 변화시키는 제강공장지역을 운행하는 기관차 및 TLC (Torpedo Ladle Car)의 용선 수성작업을 분석하여 기관차 및 TLC의 적정댓수를 산정하고, 운행 패턴의 변화에 따른 대안들을 검토하였다. 시뮬레이션은 AUTOMOD II를 이용하여 수행하였으며, 시뮬레이션에 이용되는 관련 기준 및 운행 패턴을 수집하여 확정하고, 실적치의 분포를 추정하였다. 시뮬레이션의 결과는 현장 전문가들의 이해를 높이기 위아여 Animation을 통하여 가시화하였다.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.99-114
• /
• 2002

디젤기관차 36% 내구연한 초과 - 전철화 및 노후차량 폐차 계획에 의한 대체 필요, 전기기관차 2010년 이내에 94% 내구연한 도래 - 전철화 및 노후차량 대체 계획에 의한 차량 보유 증가(중략)

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.373-381
• /
• 2009

To preserve steel cultural properties on display outdoors, the surface of these relics is processed with a covering treatment, which is a typical anti-corrosion method. Since the registered cultural heritage of Korea No. 78 Locomotive at Jangdan Station of Gyeongui Line will be treated by preservation process and displayed in the open outdoor area, effective surface covering agents were selected through testing to prevent the corrosion of the locomotive. The mixed wax are based on two types of microcrystalline wax which is one of regular surface covering agents for locomotives and bee‘s wax. For the weather resistance test, 3 types of wax were applied to each specimen of the locomotive and the specimens were tested in the Xenon-Arc Accelerated Weathering Tester for 1000 hours in accordance with the ISO 4892-1981 criteria and the test results were compared. As a result, on the surface of the specimen coated with the bee's wax, a whitening event appears after 400 hours which causes aging, and the specimens coated by the microcrystalline wax showed signs of a whitening event after 800 hours. The moisture contact angle with the microcrystalline wax coating was also less than with the bee's wax. Therefore, it was found that the high temperature microcrystalline wax is the most effective coating agent in terms of weather resistance and moisture blocking capability and the high temperature microcrystalline wax was adopted for coating the surface of the locomotive.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.51-61
• /
• 2012

Kyong-Eui Railway used to be one of the major cross-country railways connecting Busan and Shineuiju. Being the central axis of logistics and transportation in Korea, it also signifies a symbolic meaning of the people's desire for the unification of divided Korean peninsula. A steam locomotive that had stopped in Jangdan Station was bombed out during the Korean War. The locomotive has been neglected and covered with rust in DMZ over a half century, and now is becoming a historic reminder of divided Korea. The initial design approach was based on the three main perspectives of the relocation plan of the steam locomotive in Jangdan Station which is designated as the registered cultural asset no. 78: historical significance, role of a monumental space, and influence on and from the local culture and tourism. Three design subjects were especially highlighted which would represent the identity of the cultural asset, the stream locomotive. First, a vertical watching deck was installed to provide various view points toward the locomotive while ensuring the security of visitors as well as the cultural asset. Second, the Dokgae bride area has good design potentials being on the railway. However, the site is too narrow. Thus, a new ramp and a stairway were placed responding to the existing topography so that the pedestrian environment could be secured last, to respect the local context where the locomotive was originally located, mulberry trees in the locomotive were transplanted as well. Flowering plants were planted around the display area for better ventilation to minimize the negative impact on the locomotive.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.765-771
• /
• 2008

After the KTX operation Korail has been making great effort to reliability settlement through RCM. Also maintenance cycle and method optimization for normal speed rolling stock field are lively same as high-speed rolling stock. In this paper maintenance techniques for new model electric locomotive are introduced. To find the optimal maintenance method, locomotive inspection cycle for advanced country are examined and other electric locomotive inspection cycle are compared. As a result the present time inspection cycle is totally focusing on safety aspect so the economical efficiency is quite low. Through this research optimal maintenance technique will be accomplished in the end of year 2008.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.292-295
• /
• 2003

전기기관차에 사용되는 6-병렬 구조의 견인용 직류전동기 접지개소를 실시간으로 검출하기 위하여 병렬회로가 갖는 등가 임피던스 변화를 이용한 새로운 접지검출 방법에 대하여 제안한다. 기존 보호회로가 접지 릴레이를 사용하여 접지의 발생 유무만을 인식한 것에 비하여 제안된 방법에서는 각 직류전동기의 회전자 및 계자의 접지를 선별적으로 구분하는 것이 가능한 특징을 갖는다. 제안된 검출방법의 타당성 조사를 위하여 병렬견인구동회로에 대한 컴퓨터 시뮬레이션을 수행하였다.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.824-829
• /
• 2001

The main objective of the study is to provide the criteria for determining the proper life cycle of rebuiled diesel-electric locomotive currently being operated in KNR. We predicted the most critical sections of the underframes and tested the diesel-electric locomotive vehicle to measure dynamic stresses applied to the underframes. The fileld test of the diesel-electric locomotive estimated 17.08years based on the fatigue-life estimation when they are continuously used in the present operation condition.