• Korean Journal of Medicinal Crop Science
• /
• v.15 no.4
• /
• pp.276-284
• /
• 2007

To investigate the influence of shading materials with growing stages in Panax Ginseng C. A. Meyer, the diurnal change of photosynthesis, stomatal conductance, transpiration and its any correlation were measured. The net photosynthetic rate and stomatal conductance of ginseng were higher in the morning than in the broad day. The net photosynthetic rate was increased as the PAR (Photosynthetically Action Radiation) was increased and it was reached the maximum at the $200\;{\mu}mol/m^2/s$ of PAR in overall leaves. Transpiration rate was increased in the afternoon compared to in the morning. The transpiration rate was higher in rain shelter shading plate than in polyethylene net. A linear equation was obtained between net photosynthetic rate and stomatal conductance in the morning. SPAD was higher in rain shelter shading plate than in polyethylene net through all growth stages. It may result from the decrease of growth progress. From investigating photosynthetic characteristics, we concluded that shading plate of rain shelter was more an efficient material to ginseng growth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4484-4492
• /
• 2011

The purpose of this study was to analyze dental laboratory's self health recognition level and health behavior level and to examine its correlation. 250 dental technicians in Seoul, Incheon, and Jeonbuk area were selected. Survey was carried out from October 11, 2010 to November 25, 2010 by using self-administered questionnaire. The following are the analytical results in the collected data. The average in the self- health recognition was indicated to be high with 2.83, The average of health behavior was indicated to be high with 2.76. As for correlation between self health recognition and health behavior, most of variables were indicated to have reverse correlation, it was concluded that higher health behavior likely led to lower self health recognition. From the result of this study, the work environment of dental technician must be improved and do more Practice of Health Behavior to improve and maintain their health.

• Membrane Journal
• /
• v.13 no.1
• /
• pp.37-46
• /
• 2003

The electrokinetic effect can be found in cases of the fluid flowing across the charged membrane micropores. The externally applied body force originated from the electrostatic interaction between the nonlinear Poisson-Boltzmann field and the flow-induced electrical field is taken into the equation of motion. The electrostatic potential profile is computed a priori by applying the finite difference scheme, and an analytical solution to the Navier-Stokes equation of motion for slit-like pore is obtained via the Green's function. An explicit analytical expression for the flow-induced streaming potential is derived as functions of relevant physicochemical parameters. The influences of the electric double layer, the surface potential of the wall, and the charge condition of the pore wall upon the velocity profile as well as the streaming potential are examined. With increasing of either the electric double layer thickness or the surface potential, the average fluid velocity is entirely reduced, while the streaming potential increases.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.83-91
• /
• 2014

In this study, we synthesized two different silica monoliths by using sol-gel, solvent exchange, surface modification, ambient pressure drying processes, and surfactant-based templating technique followed by calcination process. All of the prepared two silica monoliths showed crack-free appearance with fairly good transparency, and furthermore were confirmed to have extremely high porosity, specific surface area, and mean pore size below 30 nm. The silica aerogel sample exhibited finer and more homogeneous nano-sized pore structure due to spring back effect caused by surface modification, which resulted in better thermal insulation performance. Based on measured thermal conductivities and theoretical relationship, multi-layered glass window system in which silica monolith prepared in this study was inserted as a middle layer was revealed to have superior thermal insulation performance compared to conventional air-inserted glass window system.

• Korean Chemical Engineering Research
• /
• v.55 no.6
• /
• pp.771-777
• /
• 2017

Adsorption characteristics of Eosin Y dye by carbon nano tubes (CNTs) were examined through batch experiments. CNTs used in the study had specific surface area of $106.9m^2/g$, porosity volume of $1.806cm^3/g$, and porosity diameter of $163.2{\AA}$, respectively. Adsorption experiments were carried out as function of contact time, initial solution pH (2~10), dye concentration (100, 150 and 200 mg/L), adsorbent dose (0.05~1.0 g) and temperature (293, 313 and 333 K). The adsorption was favoured at lower pHs and temperatures. Adsorption data were well described by the Langmuir model. The adsorption process followed the pseudo-second order kinetic model. The adsorption capacity decreased with increase in temperature. The results of the intraparticle diffusion model suggested that film diffusion and particle diffusion were simultaneously occured during the adsorption process. Thermodynamic studies suggested the spontaneous and endothermic nature of adsorption of Eosin Y dye onto CNTs.

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.36-43
• /
• 2006

There was some difficulty dewatering properties due to small porosity diameter of cake, when pigment sludge contained fine particle was formed by cake under the dewatering. It was difficult to dewater the sludge with fine particles with the conventional mechanical dewatering method. This study was to improve the dewatering rate as discharging the water from porosity of cake easily, supplying the low heat to the cake layer. Thermal dewatering equipment of piston type to keep up constant temperature on the cake was set up and relative experiment was conducted for sludge of 200 g with fine pigment particle. As test results. filtration of 176.8 g, cake weight of 19.4 g, cake thickness of 4.2 mm was measured, and it was analyzed that the water content of cake was 47 wt% and dewatering velocity, which moaned the residual d교 sloid amount per dewatering area, was $2.1DS\;m^{2}{\cdot}cycle$. This results showed that filtration increased, cake weight and thickness decreased and dewatering velocity increased against mechanical dewatering method. And water content of cake decreased about 30%, so the result which dewatering rate improved was drew generally. The reason is that the inner vapor pressure working at the cake porosity increased as applying the low heat to the cake layer, which lead to discharge the water from porosity easily. Therefore, this study was estimated by the useful technology for sludge reduction.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.77-83
• /
• 2020

A series of foamed plastic sheets containing biomass (as HMR container) were developed via different foaming process temperatures, and their density, porosity, WVTR, and pore morphology were evaluated. Thermal stability of samples during re-heating the food in oven, change in morphology, density, porosity, and WVTR were investigated using a simulated thermal shock process according to MIL-STD-883E assay. As such, the pore size of samples was generally increased with increasing temperature of the foaming process. It can be explained that as foaming temperature increased, the viscosity of molten resins and the repulsive force against pore expansion decreased. In addition, an increase in the thermal shock cycle reduced the pore size and WVTR, while density increased because high temperature treatment that softened the sheet matrix was followed by a low temperature incubation, which contracted the matrix, thereby changing the physical and morphological properties of samples. However, an insignificant change in density was observed and WVTR tended to be decreased, indicating that as-prepared foamed plastic sheets could be used as a high thermal stable container for HMR application. Therefore, it found that the properties of newly developed HMR containers containing biomass were dependent on the foaming process temperature. Moreover, to better understanding of these newly developed containers, further investigations dealing with foaming process temperature based on various food items and cooking conditions are needed.

• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.82-94
• /
• 1984

The variation of stomatal density and stomatal length of four species of oaks was studied for the purpose of examining the differences among populations and among individual trees within population. Nine populations of Quercus mongolica, four populations of Q. serrata and Q. variabilis respectively, and three populations of Q. acutissima were selected in the natural stands of oaks distributed through the whole country. Twelve leaves were sampled from each of 20 trees from each population. The length of 20 stomata and ten replications of stomatal density were measured from collodion replicas of each leaf under a microscope. Average stomatal densities and lengths ranged through $600-1000/mm^2$ and $19-26{\mu}m$ respectively in all of the species studied. The stomatal densities and lengths presented significant differences statistically at the level of 1 or 5% among populations and among individual trees within population in all the species. Quercus mongolica, especially, showed large variation among populations, while Q. variabilis did very narrow variation compared to the other species. The coefficients of variation of stomatal densities and lengths among individual trees within population exhibited small values of 3.7-12.0% and 1.4-5.3% respectively in all the populations of the species. The average stomatal densities of Q. mongolica showed statistically significant correlation of multiple correlation coefficient of $R_{df{\cdot}2.6}=0.868^*$ and multiple regression equation of $Y=0.041X_1(G.M.T.S.)+0.489X_2(G.M.H.S.)+22.37$ with the sum of growing season mean daily temperature and the sum of growing season mean daily humidity of the stand studied. However the average stomatal lengths showed no relation with the same meteological variables. The figures of frequency distribution of the measurements of leaves or the mean values of individual trees did not show normal distribution curves in some populations. The curves, as well as the results of ANOVA, exhibited the differences among populations.

• Electrical & Electronic Materials
• /
• v.8 no.3
• /
• pp.372-381
• /
• 1995

본 논문에서는 분체 특성 평가 연구의 국제 동향과 입자형태, 입도분포, 비표면적, 분체밀도, 기공도, 화학분석 평가분야의 기본원리, 특히 측정시 변수들의 영향과 이러한 특성변화에 따른 전기적성질 변화에 대하여 간단히 언급을 하였다. 분체 특성평가분야의 연구는 선진국에 비해 낙후되어 있고 관심도 또한 낮은 형편이다. 이 분야의 학문적, 산업적인 중요점을 고려할 때, 분체 특성 평가에 대한 기초 및 응용연구가 활성화되었으면 한다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.34-35
• /
• 1994

Tube-in-orifice형태의 spinneret을 제작하여, polyethersulfone을 재질로 하는 capillary membrane을 건습식방사공정을 통해 제조하였다. 기공형성계는 PVP를, 용매는 NMP/DCM을, 내부응고제는 물과 NMP의 혼합물을, 외부응고제는 냉각수를 사용하였다. 내부응고제의 NMP농도에 따른 막의 형태와 microstructure를 연구하였다. 내부응고제가 약한 응고력을 가질 때 macrovoid가 없고, 내부의 활성층이 치밀한 막을 얻을 수 있었다. PES-NMP/DCM-PVP조성(25-44/11-20)의 용액으로, 40% NMP수용액을 내부응고제로 사용하여, 막을 제조하고 이를 모듈화하여, 한외여과실험을 한 결과, MWCO 8,000인 모듈이 얻어졌으며, 이 모듈의 Flux는 1기압에서 $1.44 \times 10^{-5}m/sec$이었다.