• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.4
• /
• pp.55-60
• /
• 2009

Porous silicon film is fabricated by electrochemical etching in a chemical mixture of HF and ethanol. Effects of Si type, Si resistivity, ultrasonic frequency, current density and etching time on surface morphology of PS film were studied. Electrochemical etching in ultrasonic bath promotes the uniformity of porous layer of Si. Frequency of ultrasonic was increased from 40 kHz to 130 kHz to obtain uniform pores on the Si surface. When current density was higher, the sizes of pores were larger. The new etching cell using back contact metal and current shield help to overcome nonhomogeneity and current crowding effect, and then leads to fabricate uniform pores on the Si surface. The distribution of pore size shows no notable tendency with etching time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.805-810
• /
• 2006

Defects in the conventional casting process of silver jewelry can result in famished products of mediocre hardness. To overcome the shortcomings of conventional methods, we proposed new press forming process, which involves applying uniaxial pressure on casting 92.5%Ag-6.5%Cu-1%Zn ring elements and shaping with a lath. We investigated Vickers hardness, density, and microstructure evolution by changing the applied uniaxial pressure. We report that our newly proposed process can increase the hardness up to 2.3 times and decrease average grain size by 50%. Our method leads to drastic mechanical property enhancements, and is thus suitable for casting tension-style jewelry.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.1-7
• /
• 2011

Three evergreen ground-cover species were tested and evaluated for cold acclimation with different lights in central Korea to enrich the varieties of ground cover plants for over-wintering. Nandina domestica which recently started to be planted in central Korea had high chlorophyll unit with shade condition in both locations, Banpo and Gwacheon during winter. Light condition had no influence on chlorophyll unit in Banpo after April, meanwhile full sun condition decreased chlorophyll unit significantly in Gwacheon, which is exposed to cold wind from north. Ophiopogon japonicas had more than double chlorophyll unit in shade condition compared to that in full light condition in both investigation areas in February. In addition, higher value of L and b in shade condition had been maintained than in full sun condition throughout investigation period. However, leaves in Gwacheon were de-colorized in full sun condition after over-wintering. Pachysandra terminalis had more higher chlorophyll unit in shade condition compared to in full sun condition in both investigation areas in February. But light conditions had not effect the difference of chlorophyll unit of Gwacheon in April. Therefore, The present results suggest that evergreen ground covers with shade condition would be used as landscape materials in the capital area.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.608-612
• /
• 2023

Nano-diamond (ND) was added during the carbon block preparation process to increase the thermal conductivity of the carbon block. Added ND controlled the generated pore of carbon block due to the volatilization of the binder pitch during the carbonization process. The ND was added to the kneading process of coke and binder pitch, and carbon blocks were prepared by pressing and carbonization. As the amount of added ND increased, the ND ratio of the carbon block increased. The added ND made a pass-way for generated gas by volatilizing the binder pitch during the carbonization process, increasing the density of the carbon block and reducing the porosity. The thermal conductivity of the carbon block was improved by increased density, lowered porosity, and the high thermal conductivity of added ND.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1520-1522
• /
• 1996

전기 이중층 콘덴서는 일반적인 콘덴서와 백업용 이차 전지의 중간적 성격을 갖는 디바이스로서 직류 전압 인가시 전하는 진해액과 활성탄의 계면에 전기이중층을 이루며 축적된다. 본 논문에서는 탄화 및 활성화 조건을 달리하여 활성탄 전극을 제조하고 세공 면적, 비표면적, 겉보기 밀도차 기공율을 측정,검토하였으며 여러가지 유기 용매에 tetraethylammonium tetrafluoroborate를 각각 첨가하여 제조한 전해액의 전기전도도를 정하고 이들 전해액과 활성탄 전극을 이용하여 전기 이중층 콘텐서를 제작한 후 정전용량, 활성탄 전극의 안정 전위, 체적용량 밀도, 중량용량 밀도 등을 검토하였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.5
• /
• pp.625-632
• /
• 2008

Rye-wheat mixed bread samples made with substitutions of 20, 40, 60 and 80% sourdough, and control made with the addition of naturally fermented raisin extract, were examined for quality characteristics such as pH, total titratable acidity, fermentation power of dough expansion, specific volume, baking loss, water activity, color, texture, external and internal surface appearance, and sensory qualities, in order to determine the optimal ratio of sourdough in the formulation. As the incubation time of sourdough increased, pH decreased, while total titratable acidity increased. The pH of rye-wheat mixed doughs decreased with increasing sourdough content, but total titratable acidity increased. The rye-wheat mixed breads prepared with substitutions of sourdough had higher pH and lower total titratable acidity than the control group. Fermentation power of dough expansion of rye-wheat mixed doughs increased with increasing incubation time. Specific volume was maximum on the 20% substitution sourdough. Baking loss was inferior with the 80% substitution sourdough. Water activity and lightness was minimum on the control group. The higher amounts of sourdough showed the higher tendency of lightness, redness and yellowness. In the texture characteristics, hardness, gumminess, and chewiness was minimum on the control group and tended to increase with higher substitution of sourdough. Substitution of sourdough showed decrease adhesiveness. Fracturability, cohesiveness, and resilience of all rye-wheat mixed breads were not significantly different. Springiness was maximum on the 20% substitution sourdough and minimum on the 40%. A side of loaf of rye-wheat mixed breads, except for 20%, had a poor break and shred. In sensory evaluation, as substitution amount of sourdough increased, the scores of color and consistency of crumb, uniformity of crumb pore, gumminess, and overall acceptability decreased; while the density of crumb pore, springiness of crumb, aroma of rye flour, sourness, and bitterness showed the reverse effect; the 20, 40, and 60% sourdough samples obtained fairly good scores. In conclusion, these results indicated that $20{\sim}60%$ of sourdough could be very useful as a substitute for baker's yeast in developing rye-wheat mixed bread.

• Resources Recycling
• /
• v.9 no.2
• /
• pp.40-45
• /
• 2000

Low density ceramic supporter was prepared by using fly ash as a starting mterial with borax or glass powders. Also the wheat powders were used by 30 wt% to increase the initial porosity of the supporter. The density of the supporter decreased as the amount of borax increased. The bulk density of $0.79g/\textrm{cm}^3$ and the apparent density of $1.10g/\textrm{cm}^3$ were obtained when the fly ash with 15% of borax was sintered at $1160^{\circ}C$ for 15 minutes. The density also decreased as the plate glass powders past through $212\mu\textrm{m}$ size were mixed. When the fly ash with 12% of glass powder was sintered at $1280^{\circ}C$ for 10 minutes, the bulk and apparent density were $0.90g/\textrm{cm}^3$ and $1.00g/\textrm{cm}^3$, respectively.

• Korean Journal of Materials Research
• /
• v.6 no.3
• /
• pp.318-323
• /
• 1996

원소 분말을 합성하여 Ti5SI3 화합물을 합성하는 방법을 연구하였다. 합성법으로서는 기본적으로 반응소결법을 사용하였으며, 치밀화를 위하여는 유사-열간 정수압 성형법(PHIP, pseude-hot isostatic pressing)을 사용하였다. 반응소결법에서는 분말의 입도, 반응온도 및 유지시간이 소결밀도에 영향을 주었으며, PHIP법에 의한 치밀화에서는 압력 및 유지 간이 주요 변수로 사용되었다. 이들 변수중 미세한 입도와 유지시간이 기공을 감소시켰다. 또한 Cu의 첨가 영향을 연구하였는데, 약 6wt%이내의 Cu 첨가는 밀도 향상에 좋은 영향을 미쳤다. 반응소결 및 PHIP를 통해 Ti5SI3 -Cu의 상대밀도를 약 99%까지 높일 수 있었으며, 이때 Cu의 효과는 감도지수 부합됨을 확인하였다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.113-118
• /
• 2006

In this work, we observed the changes in mass difference according to Al-foam's amount of Ca contents which depends on the viscosity control of fusion, quality of foamed addition, mixing, temperature tests. These are crucial influencing factors in determining foam-metal's size in the manufacturing process. In order to obtain the specimen, we changed the specific gravity from 0.2 to 0.3 for the study of the light weight, and obtained the optimal values of specific gravity, and then showed the mechanical characteristics of ultra-lightweight metal according to the changing mass. The optimal conditions for aluminum foam is when the addition of Ca content in $1.5wt\%~2.0wt\%$

• Resources Recycling
• /
• v.7 no.1
• /
• pp.14-19
• /
• 1998

Tile pl~ysimchemical properties of residual or unburned carbon obtaincd from fly ash were mestigated. The carbon-enrichcd samples were extracted from fly ash by flotalion mcthod. Tnz carbon content and chemical compos~lion of t b recovered carbon sample were analyzed. The ash in the carbon sample was also examined. The unburned carbon characterization included measurement oE sire distibution, sudace area, crystal shuchlre md density.