• Korean journal of food and cookery science
• /
• v.18 no.2
• /
• pp.206-210
• /
• 2002

The bread qualities were analyzed objectively by using CrumbScan software. Samples were prepared at the same conditions of mixing, fermentation, and baking time except the amount of Korean wheat flour (KWF). The bread volume was increased with increasing KWF, and the maximum volume was attained in the product of 20% KWF. Although the products of 20% and 30% KWF showed the same thickness of the crust, the crust was thinner than control when KWF was added. The size (fineness) and shape (elongation) of crumb cells were larger and rounder than control due to the low degree of elasticity of the KWF-added dough. Among the samples, the product with 20% KWF showed the most even distribution of crumb cells around the sliced area. The precise determination of external and internal characteristics of the bread was possible with Crumbscan, suggesting the possibility of developing industrial standards for bread.

• The Korean Journal of Ecology
• /
• v.17 no.3
• /
• pp.241-249
• /
• 1994

Leaf diffusive resistance (LDR), stomatal density, length of guard cell and hair density of leaves of 6 oak species were determined under withdrawal of water, and their strategies of drought stress were analyzed by principal component analysis. LDR of Quercus acutissima, Q. aliena and Q. serrata increased earlier than those of the other species at high leaf water potential $({\Psi}_{leaf})$ or low water saturation deficit (WSD), which was an avoidance mechanism reducing damage by water stress. Q. variabilis with low stomatal density, small stomatal size and high hair density had avoidance mechanisms increasing LDR at high $({\Psi}_{leaf})$ However, Q. mongolica and Q. dentata increased LDR at low $({\Psi}_{leaf})$ as xeric species do. Results from principal component analysis on the 15 variables related to strategies of drought stress indicated that the 6 oak species were divided into 2 groups: (1) Q. acutissima, Q. aliena and Q. serrata as mesic habitat species and (2) Q. variabilis, Q. mongolica and Q. dentata as xeric habitat species. Among three xeric species Q. acutissima differed from the other two species in the drought strategies such as high hair density, low stornatal density, high leaf area ratio, stomatal closing at low $({\Psi}_{leaf})$ and small cell wall elasticity. The results could reasonably explain their drought strategies in natural habitat.

• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.82-94
• /
• 1984

The variation of stomatal density and stomatal length of four species of oaks was studied for the purpose of examining the differences among populations and among individual trees within population. Nine populations of Quercus mongolica, four populations of Q. serrata and Q. variabilis respectively, and three populations of Q. acutissima were selected in the natural stands of oaks distributed through the whole country. Twelve leaves were sampled from each of 20 trees from each population. The length of 20 stomata and ten replications of stomatal density were measured from collodion replicas of each leaf under a microscope. Average stomatal densities and lengths ranged through $600-1000/mm^2$ and $19-26{\mu}m$ respectively in all of the species studied. The stomatal densities and lengths presented significant differences statistically at the level of 1 or 5% among populations and among individual trees within population in all the species. Quercus mongolica, especially, showed large variation among populations, while Q. variabilis did very narrow variation compared to the other species. The coefficients of variation of stomatal densities and lengths among individual trees within population exhibited small values of 3.7-12.0% and 1.4-5.3% respectively in all the populations of the species. The average stomatal densities of Q. mongolica showed statistically significant correlation of multiple correlation coefficient of $R_{df{\cdot}2.6}=0.868^*$ and multiple regression equation of $Y=0.041X_1(G.M.T.S.)+0.489X_2(G.M.H.S.)+22.37$ with the sum of growing season mean daily temperature and the sum of growing season mean daily humidity of the stand studied. However the average stomatal lengths showed no relation with the same meteological variables. The figures of frequency distribution of the measurements of leaves or the mean values of individual trees did not show normal distribution curves in some populations. The curves, as well as the results of ANOVA, exhibited the differences among populations.

• Nuclear Engineering and Technology
• /
• v.23 no.1
• /
• pp.49-55
• /
• 1991

The microstructure and pore characteristics have been studied on the sintered UO$_2$pellet which was made of the UO$_2$powder manufactured via AUC process. The open porosity decrease with the density and is nearly annihilated above the density of 10.45 g/㎤. The round pore smaller than 3 $\mu$m exist In all densities. The large and elongated pore appears additionally In low density The pore in low density is more elongated than the pore in high density The distribution of the pore area versus the pore size is monomodal and shows its peak on the pore size of 2 to 3 $\mu$m. As the density decreases, the related area of large pore Increases.

• Korean Journal of Ecology and Environment
• /
• v.56 no.4
• /
• pp.384-392
• /
• 2023

Stomatal pore is an important physiological trait that is closely linked to photosynthesis and transpiration as carbon dioxide and water vapor move through it between the atmosphere and plants. The present study investigated stomatal traits, such as stomatal density, index and size, of herbaceous native and alien plant species living in a riparian park on the Nakdong River to understand how those traits vary and to know if successful settlement of alien plants is attributed to those traits. There was no difference in stomatal density, index and size between native and alien plants with kidney-shaped stomata, suggesting that an empty ecological niche is not an essential prerequisite for the successful settlement of alien plants. Stomatal density showed a negative correlation with leaf thickness and leaf dry weight content (LMDC), but there was no correlation with Specific leaf area (SLA). All plants with kidney-shaped stomata had amphistomatous leaves, and the density and size of dumbell-shaped stomata were lower than those of kidney-shaped stomata.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.919-927
• /
• 2002

In order to fabricate double-layered porous materials powders of different particle sizes were pressed stepwise. Ford＇s equation which predicts the fired density with the change in pressed density was employed in order to adjust the difference in sintering shrinkage of the green body with double-layered porous structure. Double-layered porous materials were characterized by investigating microstructures and permeability. SEM micrographs showed the distinct difference in pore sizes of double-layered porous material. Permeability of single-layered porous material increased by increasing the starting particle sizes and porosity as well. Permeability of the double-layered porous material depends largely on the layer of small pore diameter.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.2
• /
• pp.90-100
• /
• 1994

Ultrasonic velocities are widely used in the investigation of material properties. In this paper, a micromechanics model and the ultrasonic velocity were used to develop a nondestructive method to determine the density variation due to porosity in structural SiC. The micromechanics model developed can consider the pore shape and orientation. The model also takes into account the interaction between pores so that it can be applied to the material with high porosity content. A contact pulse overlap method was used to measure the ultrasonic velocities of porous SiC samples, and there was a linear correlation between the velocity and density (or porosity). Using the model and the measured velocity, the bulk density can be easily calculated. The calculated density was in good agreement with that obtained by Archimedes' method.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.10a
• /
• pp.214.1-214
• /
• 1999

• Composites Research
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2012

In order to predict the thermoelastic behavior of porous composites, poroelastic parameters are measured by using micromechanics-based finite element models. The expanding deformation caused by pore pressure, and the degradation of homogenized elastic moduli with pores are calculated for the assessment of the poroelastic parameters. Various representative volume elements considering the shape, size, and array pattern of pores are modeled and analyzed by a finite element method. The effects of porosity and material anisotropy, and the distribution of stain energy density are investigated carefully. In addition, the measured poroelastic parameters are verified by predicting the thermo-pore-elastic behavior of carbon/phenolic composites.

• Journal of Korean Society of Forest Science
• /
• v.76 no.1
• /
• pp.27-32
• /
• 1987

Stomatal morphological characteristics (shape, density and length) were investigated for 8 ornamental woody species growing in the campus of Sangji College on Usandong, Wonju, Kangwondo. Stomata of Forsythia koreana, Syringa dialata, Zedkova serrata and Chaenomeles sinensis were classified as irregular-celled type (anomocytic), those of Vibrunum sargentii, Liriodendron tulipifera and Magnolia kobus as parallel-celled type (paracytic). For Forsythia koreana, stomatal length was not greatly changed as the leaf blade, growing larger. Number of stomata per unit leaf area was decreased, but number of stomata per single leaf was increased as the leaf blade, growing larger. For Taxus cuspidata, stomatal length was increased, but number of stomata per unit needle area was decreased as the needle, growing larger.