• Korean Journal of Weed Science
• /
• v.9 no.1
• /
• pp.46-55
• /
• 1989

Stomatal variation was observed at the Yeongnam Crop Experiment Station in 1988 using 42 rice cultivars and 30 weed species. The shape, density or size of stomata was varied depending on the species. Two general trends, however, were found that more number of stomata was found at lower leaf epidermis than upper leaf epidermis and stomata number was negatively correlated with stomata size. Aneilema japonica and Portulaca oleracea had the least number of stomata having 17-20 stomata per $m^2$ for upper leaf epidermis and 17-54 stomata for lower leaf epidermis while Polygonum conspicuum had the greatest number of stomata (449 for upper leaf epidermis and 511 for lower leaf epidermis). Soybean, Aeschynomene indica, Ludwigia prostrata and Lactuca indica had the smallest in stomata size while the biggest stomata was found at P. oleracea and A. Japonica that had the least number of stomata. Cyperus species such as C. difformis, C. iria and C. serotinus had no stomata at upper leaf epidermis. The stomata were distributed only at lower leaf epidermis for these species. Potamogeton distinctus, on the other hand, had stomata almost at upper leaf epidermis and thus, hardly found the stomata at lower leaf epidermis. Among rice cultivars, Tongil-type had the greatest number of stomata followed by Indica-type and Japonica-type, in order. Cultivars released after 1960 had more stomata than cultivars released before 1960 for Japonica-type cultivars while stomata size had reversed trend. Jinheung had the least number of stomata (${\fallingdotseq}$ 150 per $mm^2$) while Yushin had the greatest number of stomata (350 for upper and 449 for lower leaf epidermis, respectively) among rice cultivars. Other cultivars having more than 350 stomata per $mm^2$ were Samgangbyeo, Milyang 23, Woonbongbyeo, etc.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.2
• /
• pp.130-136
• /
• 1982

Experiments were conducted to establish a measuring method of the stomatal aperture in the leaves of the wheat plant, and to find the diurnal movements of the stomate in leaves of different position and tillers. The measurement methods used were the infiltration and the microrelief impression methods. The aperture of the stomate in the infiltration method was expressed in terms of the solutions pent ration into the leaf and this was refered to as the infiltration score. A score I represents injection with 10% iso-butyl alcohol＋90% ethylene glycol solution and a score 7 represents injection with 70% iso-butyl alcohol +30% ethlene glycol solution. A linear relationship was obtained between the infiltration score and average pore width in a large number. of the stomata observed in the leaves of the adaxial and abaxial epidermis. The aperature of the stomate of flag and the 1st leaf were exhibited diurnal change with the maximum aperture at 10 A.M. but that of 2nd leaf reached maximum aperture 2 hours later than upper two leaves. After reaching the maximum aperture the stomata gradually closed and then completely closed at 6 P.M. The aperture of the stomate in the adaxial epidermis and the base part of the leaf were larger than those in the abaxial and top part of the leaf, and aperture of the stomate in the leaves of the main stem was larger than those on the tillers.

• Journal of Korea Foundry Society
• /
• v.32 no.3
• /
• pp.150-156
• /
• 2012

발포금속은 초경량 재료로서 폐기공과 개기공의 두 가지 형태의 구조를 지니고 있으며 폐기공은 내충격성, 흡음성, 단열성의 기능을 지니고 있고, 개기공은 필터, 생체지지대, 촉매재, 열방출재 등으로 사용되고 있다. 개기공발포재는 삼차원 구조모양으로 프리커서를 이용한 압력정밀주조나 기공입자용출법으로 제조하고 있으나 기공의 크기나 셀의 형상, 두께 등을 조절하기에 어려움이 있다. 이를 해결하기 위하여 환경친화적인 펄라이트를 사용하여 목적하는 크기의 그래뉼을 제조한 후, 용융마그네슘합금을 감압주조법으로 주조하여 그래뉼의 크기로 기공율을 조절하고, 주형의 온도와 압력에 따른 유동의 길이를 측정하였다. 그래뉼 직경이 2.3 $mm{\O}$ 일때에 주형의 온도 $300^{\circ}C$ 이상, 압력이 5000 Pa 이상에서 유동길이 6.5 cm 이상을 얻었다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.307-314
• /
• 1984

One hundred winter wheat cultivars obtained from the world collections in Korea were planted in 1982. Stomatal frequency of flag leaf of these cultivars were measured, and among these 21 cultivars which showed different stomatal frequency were selected to investigate the relationship of their stomatal frequencies and other characters such as culm length, heading date and characters related to leaf. Stomatal frequency of flag leaf of 100 cultivars different significantly, ranging from 51 to 90 stomata mm$^{-2}$ for the adaxial and 35 to 65 for the abaxial surfaces of leaf. Stomatal frequency was always greater on the adaxial than on the abaxial surface. Mean ratios (adaxial/abaxial) were 1.5 for the flag leaf and 1.3 for the from second to fouth leaves. Among 21 cultivars examined, stomatal size which measured guard cell length varied from 38.5 to 46.6$\mu$ for adaxial surface and from 39.4 to 49.4$\mu$ for abaxial. A negative correlation was obtained between stomatal frequency and its size. Stomatal frequency decreased from flag (L$_1$) to lower leaves, progresively. Stomatal frequency on L$_1$ sheath was compared to those on L$_3$ and L$_4$ abaxial surface of leaf. More stomatal frequency on top and center of adaxial surface showed than that on basal part of a leaf but the abaxial surface resulted in reverse of adaxial one. Cultivars with high stomatal frequency on flag leaf showed higher stomatal frequency on the other leaves and sheaths. Positive correlation between stomatal frequency and other characters such as, culm length, heading date and chlorophyll content showed statistical significance, whearas it revealed the negative correlation of stomatal frequency with leaf weight, leaf area and stomatal aperture. However, no relation appeared between stomatal frequency and leaf vein.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1997.11a
• /
• pp.14-19
• /
• 1997

식물의 광반응은 광질과 광강도에 따라 상이하며, 광은 열을 동반하게 되므로 광만을 분리하여 생각할 수 없다. 즉, 광은 식물체의 체온과 엽온을 높이고, 잎의 수증기 장력을 증가시켜 증산을 촉진하므로 기화열을 발생하는 원동력이 되기도 한다. 따라서 광은 잎속의 수분이나 기공개도 등에 영향을 주기 때문에 광합성속도에 간접적인 영향을 미치기도 한다. (중략)

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1988.07a
• /
• pp.30-31
• /
• 1988

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.1005-1010
• /
• 1998

실험계획법을 이용하여 유리분말의 소결시 그 기공량에 영향을 미치는 각종 소결조건의 영향을 정량적으로 조사하였다. 본 실험범위내에서 결합제 유리의 총기공량, 개기공량 그미고 폐기공량은 모두 소결온도에 의해 가장 큰 영향을 받고 그 다음으로 소결온도에서의 유지시간에 의해 영향을 받으며 승온속도의 경우 그 영향이 상대적으로 미미함을 확인할 수 있었다. 이러한 결과들로부터 실제공정에 있어 승온속도보다는 다른 소결인자, 특히 소결온도를 조절하는 것이 결합제 유리의 기공량 조절에 가장 중요하리라 판단되며 실험계획법을 이용함으로써 보다 정확한 공전조건을 모색할 수 있었다.

• Nuclear Engineering and Technology
• /
• v.23 no.1
• /
• pp.49-55
• /
• 1991

The microstructure and pore characteristics have been studied on the sintered UO$_2$pellet which was made of the UO$_2$powder manufactured via AUC process. The open porosity decrease with the density and is nearly annihilated above the density of 10.45 g/㎤. The round pore smaller than 3 $\mu$m exist In all densities. The large and elongated pore appears additionally In low density The pore in low density is more elongated than the pore in high density The distribution of the pore area versus the pore size is monomodal and shows its peak on the pore size of 2 to 3 $\mu$m. As the density decreases, the related area of large pore Increases.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.71.1-71.1
• /
• 2010

고분자 전해질 연료전지(PEMFC) 내의 기체확산층(GDL)은 셀 내의 물 관리에 중요한 역할을 수행한다. 일반적으로 다공성 기제(GDBL) 위에 미세기공층(MPL)을 코팅한 2층 구조의 기체확산층이 사용되는데, 이 미세기공층은 카본파우더와 테프론의 혼합물로 이루어져 있으며 촉매층에서 발생한 물을 셀 밖으로 빠르게 배출하는 역할을 수행한다. 본 연구에서는 다양한 기공분포를 갖는 미세기공층을 제조하여 고분자 전해질 연료전지 성능에 미치는 영향을 분석하였다. 미세기공층 슬러리내에 암모늄염 계열의 기공형성제를 혼합하여 다공성 기제 위에 코팅한 후 다양한 온도조건에서 건조함에 따라 기공분포가 다른 미세기공층을 제조하였다. 이렇게 제조된 미세기공층의 물성은 수은기공도계, FE-SEM, 자체적으로 제조한 기체투과도 측정 장치를 사용하여 측정하였으며, 단위 전지 성능 측정은 두 개의 가습조건(RH100%, RH50%)에서 실시하였다. 기공분포 측정결과 건조온도가 높은 미세기공층은 건조온도가 낮은 미세기공층에 비해 직경이 1,000 - 20,000 nm 인 대공극(macropore)의 수가 많지만, 직경이 100 nm 이하의 미세공 (micropore)의 수가 적은 것을 확인하였다. 전지성능 측정 결과 고가습 조건 (RH100%)에서는 미세공 (micropore)이 발달한 미세기공층을 포함한 기체확산층을 사용한 경우 가장 우수한 성능을 보여고, 저가습 조건 (RH50%)에서는 대공극 (macropore)이 발달한 미세기공층을 포함한 기체확산층을 사용한 경우 가장 우수한 성능을 나타내었다. 이는 물배출에 유리한 미세공 (micropore)의 성질과 원료 기체의 이동에 유리한 대공극(macropore)의 성질에 의한 것으로 판단된다. 따라서 셀 운전 가습조건에 따라 최적화된 기공구조를 갖는 미세기공층을 사용함으로써 셀 운전 성능을 향상 시킬 수 있을 것으로 예상된다.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.21-26
• /
• 2015

Mesoporous ceramic materials were applied in various fields such as adsorbent and gas sensor because of low thermal conductivity and high specific surface area properties. This structure could be divided into open-pore structure and closed-pore structure. Although closed-pore structure mesoporous ceramic materials have higher mechanical property than open-pore structure, it has a restriction on the application because the increase of specific surface area is limited. So, in this work, specific surface area of closed-pore structure $TiO_2$ was increased by anneal time. As increased annealing time, crystallization and grain growth of $TiO_2$ skeleton structured material in mesoporous structure induced a collapse and agglomeration of pores. Through this pore structural change, pore connectivity and specific surface area could be enhanced. After anneal for 24 hrs, porosity was decreased from 36.3% to 34.1%, but specific surface area was increased from $48m^2/g$ to $156m^2/g$. CO gas sensitivity was also increased by about 7.4 times due to an increase of specific surface area.