• 지능정보연구
• /
• 제28권1호
• /
• pp.263-286
• /
• 2022

본 연구는 웹 크롤링을 이용하여 1990년부터 2022년까지 총 32개년에 해당하는 NBA 통계 정보를 획득하고, 탐색적 데이터 분석을 통해 관심 변수를 관찰하고 관련된 파생변수를 생성한다. 입력 데이터에 대한 정제 과정을 거쳐 무의미한 변수들을 제거하고, 남은 변수에 대한 상관관계 분석, t 검정 및 분산분석을 수행하였다. 관심 변수에 대해 플레이오프 진출/미진출 그룹 간 평균의 차이를 검정하였고, 이를 보완하기 위해 순위를 기준으로 하는 3개 집단(상위/중위/하위) 간 평균 차이를 재확인하였다. 입력 데이터 중 올해 시즌 데이터만을 테스트 세트로 활용하였고, 모델 훈련을 위해서는 훈련 세트와 검증 세트를 분할하여 5-fold 교차검증을 수행하였다. 교차검증 결과와 시험 세트를 이용한 최종 분석 결과를 비교하여 성능 지표에서 차이가 없음을 확인함으로써 과적합 문제를 해결하였다. 원시 데이터의 품질 수준이 높고, 통계적 가정을 만족하기 때문에 적은 수준의 데이터 세트임에도 불구하고 대부분 모델에서 좋은 결과를 나타냈다. 본 연구는 단순히 머신러닝을 이용하여 NBA의 경기 결과를 예측하거나 플레이오프 진출 여부만을 분류하는 것에서 그치지 않고, 입력 특성의 중요도를 파악하여 높은 중요도를 갖는 주요 변수에 본 연구의 관심 대상 변수가 포함되는지를 확인하였다. Shap value의 시각화를 통해 특성 중요도의 결과만으로 해석할 수 없었던 한계를 극복하고, 변수의 진입/제거 과정에서 중요도 산출에 일관성이 부족하다는 점을 보완할 수 있었다. 본 연구에서 관심 대상으로 분류했던 3점 및 실책과 관련된 다수의 변수가 미국 프로농구에서의 플레이오프 진출에 영향을 미치는 주요 변수에 포함되는 것으로 나타났다. 본 연구는 기존의 스포츠 데이터 분석 분야에서 다루었던 경기 결과, 플레이오프 및 우승 예측 등의 주제를 포함하고 분석을 위해 여러 머신러닝 모델을 비교 분석했다는 점에서 유사성이 있지만, 사전에 관심 속성을 설정하고, 이를 통계적으로 검증함으로써 머신러닝 분석 결과와 비교하였다는 측면에서 차이가 있다. 또한 XAI 모델 중 하나인 SHAP를 이용하여 설명 가능한 시각화 결과를 제시함으로써 기존 연구와 차별화하였다.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

• 대한원격탐사학회지
• /
• 제35권6_4호
• /
• pp.1319-1326
• /
• 2019

한국항공우주연구원은 지속적으로 증가하는 공공분야의 위성영상 수요에 대응하기 위해 정부 위성정보활용협의체를 운영하고 있으며, 사용자 편의성 증진 및 위성영상 활용 활성화를 위해 매년 한반도 모자이크 영상을 제작하여 제공하는 등 다양한 지원사업을 수행하고 있다. 특히 한반도 모자이크 영상의 활용도를 높이고 사용자가 손쉽게 분류 영상을 현업에 활용할 수 있도록 모자이크 영상을 분류 및 갱신하는 방안을 모색하고 자 하였다. 그러나 한반도 모자이크 영상은 영상 융합 및 컬러 밸런싱 등을 적용하기 때문에 분광정보, 즉 색상왜곡이 발생하고 R, G, B 밴드만 보유하고 있다는 한계점이 있기 때문에 모자이크 영상으로 만들어낸 분류 결과가 현업에서 활용될 수 있는 수준인지 확인 및 검증이 필요하다. 따라서 본 연구에서는 모자이크 영상으로 분류를 수행했을 때 그 결과물의 신뢰도를 KOMPSAT-3 영상과 비교하여 확인해보고자 하였다. 연구 결과, KOMPSAT-3 영상의 분류 정확도는 약 81~86%(전체 정확도 약 85%)로 나타난 반면, 모자이크 영상분류 결과의 정확도는 약 69~72%(전체 정확도 약 72%)로 다소 낮게 나타났다. 이러한 현상은 모자이크 영상을 생성하는 과정에서 영상 융합과 모자이크 과정을 거치며 본래의 분광정보가 왜곡되었을 뿐만 아니라, 컬러밴드인 R, G, B 세 가지의 밴드만 제공함에 따라 NDVI나 NDWI 정보를 실제 모자이크 영상이 아닌 KOMPSAT-3 영상에서 추출하였기 때문으로 해석된다. 비록 현재로서는 모자이크 영상으로 토지피복분류를 수행하여 사용자에게 배포하기에는 무리가 있을 것으로 판단되나, 추후 모자이크 영상을 제작할 때 분광정보 왜곡을 최소화할 수 있는 방법을 모색하고 R, G, B 밴드뿐만 아니라 NIR 밴드도 함께 제공하거나 모자이크 영상에 적합한 영상분류 기술을 개발할 필요가 있을 것으로 생각된다. 또한 지형특성별 분류결과 비교분석과 관심객체별 기계학습 등을 통한 영상분류 방법을 개발하는 등 관련 연구를 지속한다면, 추후 분광정보가 제한된 영상들도 활용도가 높아질 수 있을 것으로 기대된다.

• 설비공학논문집
• /
• 제12권12호
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

• 설비공학논문집
• /
• 제20권6호
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1234-1268
• /
• 2004

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2002 and 2003 has been carried out. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment/design. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation in diverse facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat transfer, humidity was also interesting to promote comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing research topics. Well developed CFD technologies were widely applied for analysis and design of various facilities and their systems. (2) Heat transfer characteristics of enhanced finned tube heat exchangers and heat sinks were extensively investigated. Experimental studies on the boiling heat transfer, vortex generators, fluidized bed heat exchangers, and frosting and defrosting characteristics were also conducted. In addition, the numerical simulations on various heat exchangers were performed and reported to show heat transfer characteristics and performance of the heat exchanger. (3) A review of the recent studies shows that the performance analysis of heat pump have been made by various simulations and experiments. Progresses have been made specifically on the multi-type heat pump systems and other heat pump systems in which exhaust energy is utilized. The performance characteristics of heat pipe have been studied numerically and experimentally, which proves the validity of the developed simulation programs. The effect of various factors on the heat pipe performance has also been examined. Studies of the ice storage system have been focused on the operational characteristics of the system and on the basics of thermal storage materials. Researches into the phase change have been carried out steadily. Several papers deal with the cycle analysis of a few thermodynamic systems which are very useful in the field of air-conditioning and refrigeration. (4) Recent studies on refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement when new alternative refrigerants are applied. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and new alternative refrigerants including natural refrigerants. Efficiency of various compressors and performance of new expansion devices are also dealt with for better design of refrigeration/air conditioning system. In addition to the studies related with thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out. It should be noted that the researches on two-phase flow are constantly carried out. (5) A review of the recent studies on absorption refrigeration system indicates that heat and mass transfer enhancement is the key factor in improving the system performance. Various experiments have been carried out and diverse simulation models have been presented. Study on the small scale absorption refrigeration system draws a new attention. Cooling tower was also the research object in the respect of enhancement its efficiency, and performance analysis and optimization was carried out. (6) Based on a review of recent studies on indoor thermal environment and building service systems, it is noticed that research issues have mainly focused on several innovative systems such as personal environmental modules, air-barrier type perimeterless system with UFAC, radiant floor cooling system, etc. New approaches are highlighted for improving indoor environmental conditions and minimizing energy consumption, various activities of building energy management and cost-benefit analysis for economic evaluation.