• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.295-303
• /
• 2023

South Korea has recently witnessed an increasing number of seismic events, leading to a surge in studies focusing on seismic earth pressures, as well as the attributes of geological layers and ground where foundations are established. Consequently, earthquake-resistant design has become imperative to ensure the safety of subterranean structures. The slurry wall method, due to its superior wall rigidity, excellent water resistance, and minimal noise and vibration, is often employed in constructing high-rise buildings in urban areas. However, given the separation between panels that constitute the wall, slurry walls possess limited resistance to seismic loads in the longitudinal direction. As a solution, several studies have probed into the possibility of interconnecting slurry wall panels to augment their seismic performance. In this research, we developed and evaluated a method for linking slurry wall panels using mechanical joints, including concrete-confined steel pipes and headed bars, through mock-up tests. We also assessed the constructability of the suggested method and compared it with other analogous methods. Any challenges identified during the mock-up test were discussed to guide future research in resolving them. The results of this study aid in enhancing the seismic performance of slurry walls through the development of an interconnected panel method. Further research can build on these findings to address the identified issues and improve the efficacy and reliability of the proposed method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.31-40
• /
• 2017

Absolute nodal coordinate formulation was developed in the mid-1990s, and is used in the flexible dynamic analysis. In the process of deriving the equation of motion, if the order of polynomial referring to the displacement field increases, then the degrees of freedom increase, as well as the analysis time increases. Therefore, in this study, the primary objective was to reduce the analysis time by transforming the dimensional equation of motion to a non-dimensional equation of motion. After the shape function was rearranged to be non-dimensional and the nodal coordinate was rearranged to be in length dimension, the non-dimensional mass matrix, stiffness matrix, and conservative force was derived from the non-dimensional variables. The verification and efficiency of this non-dimensional equation of motion was performed using two examples; cantilever beam which has the exact solution about static deflection and flexible pendulum.

• Composites Research
• /
• v.18 no.4
• /
• pp.27-34
• /
• 2005

Salt water spray and immersion tests were experimentally conducted for over 6 months to investigate the durability of glass fabric/phenolic composites under salt water environment. Mechanical properties such as tensile properties, flexural properties, and shear properties were evaluated and thermal analysis properties such as storage shear modulus, loss shear moduls, and tan 6 were obtained through a DMA. A change in chemical structures was analyzed through a FTIR. According to the results, mechanical properties and thermal analysis properties were sensitive to salt water environment and these properties began to degrade in increasing in exposure times. However, tensile and flexural moduli started to decrease and then slightly increase as increasing in exposure times due to plasticization and crosslinking in matrix as well as physical swelling in composites. Beyond a certain exposure times, these properties began to decrease as further increasing in exposure times. Also the shape and location of peaks in FTIR curves were insensitive to exposure times, but the intensity of peaks would be. finally we found that the durability of glass fabric/phenolic composites were affected on salt water immersion environment rather than salt water spray environment.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.108-108
• /
• 2009

Precipitation hardening nickel base alloys strengthened by intermetallic compounds are extensively used to manufacture on the components of the hot section of gas turbine engines. To ensure structural stability and maintenance of strength properties for a long time, nickel alloys are normally subjected to complex alloying with elements to form ${\gamma}'$(gamma prime). Such alloys have a limited weldability, are normally welded in high temperature. However, laser welding have a merit that applies in room temperature as easy control of welding parameter and heat input. In this study, $CO_2$ laser welding is applied on STS304 plate with good ductility and precipitation hardening nickel base alloy (GTD111DS) used blade material. Also, several welding parameters are applied on powder, power and travel speed. There are no cracks in Rene 80 and IN 625 powder when STS304 plate is used. But IN 625 powder has no cracks and Rene 80 have some cracks in welds with GTD111DS substrate. Adjusting of welding parameter is tried to apply Rene 80 having a good strength compare to IN 625. In the result of adjusted welding parameter, optimized welding parameters are set with low power, low feed rate and high welding speed. Tensile strength of GTD111DS substrate with Rene 80 powder is same and over than the one of base metal in room temp and high temp($760^{\circ}C$).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.134.1-134.1
• /
• 2014

콜로이달 리소그래피는 나노미터 크기의 나노구를 자가조립에 의해 정렬시킴으로써, 파장이하 크기의 주기 구조를 저비용으로 쉽게 구현할 수 있는 패터닝 기법이다. 콜로이달 리소그래피나 소프트 리소그래피와 같이 대면적 패터닝이 가능한 공정을 태양전지를 위한 반사방지 및 광 포획 증대 구조에 적용함으로써, 기존 성능을 크게 향상시켰다. 본 연구에서는, 유한차분 시간영역 수치해석법을 이용하여 반사 방지 및 광 포획 증대 구조에 대한 이론적 검증 및 설계를 진행하였고, 콜로이달 리소그래피 및 반도체 공정을 통해 샘플을 제작하였으며, 제작된 샘플의 성능을 적분구를 겸비한 자외선 가시광 근적외선 영역 분광기를 통해 평가하였다. 반사방지 나노섬을 겸비한 나노 원뿔대 언덕형 굴절률 소자를 구현함으로써, 300나노미터 이하의 구조체를 사용하지 않고도 근자외선 영역을 포함하는 태양광 에너지의 손실을 최소화할 수 있는 광대역 방사방지 구조체를 제시하였다. 나노 원뿔대가 격자상수 이상의 파장에 대한 언덕형 굴절률을 제공하고, 4분의 1파장 나노섬 반사방지막이 격자 상수 이하의 근자외선 태양광을 추가적으로 흡수하여, 근자외선 영역에서의 평균 반사율을 3.8% 수준으로 달성 할 수 있었다. 또한, 낮은 양호계수를 갖는 속삭임 회랑 공진기 어레이를 이용하여, 박막 태양전지에 적합한 유전체 기반 광포획 증대 나노구조를 제시하였다. 나노반구, 나노고깔, 나노구, 함몰형 나노구 어레이 형태를 가지며, 500nm의 주기를 갖는 유전체 표면 텍스쳐드 구조를 초박형 비정질 실리콘 필름(100nm) 위에 제작하여 광대역 광 포획 증대 효과를 실험적으로 평가하였다. 구조들 중 함몰형 나노구 어레이가 결합된 비정질 실리콘 박막이 가장 높은 성능을 보였으며, 구조가 없는 경우 대비 약 67.6%의 가중 흡수율 증가를 나타내었다. 특히, 함몰형 나노구 어레이 구조 중 폴리메틸메타아크릴레이트로 제작된 평판형 함몰층은 나노구 비정질 박막 실리콘 사이의 접착력 및 기계적 강성을 향상시켰을 뿐 아니라, 함몰층 내부로 회절되고 산란된 빛들이 도파모드 효과에 의해 부가적인 광 포획 증대를 가져옴으로써, 가장 높은 광 포획 효과를 얻을 수 있었다. 유전체 기반 나노 구조들은 간단하고 저비용이며, 대면적으로 쉽게 제작할 수 있는 자가 조립 기반 콜로이달 리소그래피 및 소프트 리소그래피 기술을 이용하여 제작되었다.

• Korean Journal of Materials Research
• /
• v.14 no.3
• /
• pp.168-174
• /
• 2004

The aim of this study is to investigate the effect of process conditions on the microstructual changes and mechanical properties of large 7175 aluminum die forgings. The cast billets of 370 and 720 mm in diameter were homogenized and die forged after direct chill casting. The size and volume fraction of second phase particles in 720 mm billet were larger than those of 370 mm billet. The interdendritic sites containing the second phase particles was considered to be a crack initiation region in the process of cold upsetting. The tensile and yield strength of die forged specimens of 720 mm billet in the direction of Land L T were higher than those of 370 mm billet. However, the tensile strength of these specimens were 5 to 10% lower than that of American military specification. The plane strain fracture toughness of die forged specimens of 370 mm cast billet showed almost the same level of 720 mm billet, which was die forged after free forging.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1182-1190
• /
• 2003

A parallelized FEM code based on domain decomposition method has been recently developed for large-scale computational fluid dynamics. A 4-step splitting finite element algorithm is adopted for unsteady flow computation of the incompressible Navier-Stokes equation, and Smagorinsky LES model is chosen for turbulent flow computation. Both METIS and MPI Libraries are used for domain partitioning and data communication between processors, respectively. Tiburon model of Hyundai Motor Company is chosen as the computational model at Re=7.5 $\times$ 10$^{5}$ , which is based on the car height. The calculation is carried out under both the wind tunnel condition and the road condition using IBM SP parallel architecture at KISTI Super Computing Center. Compared with the existing experimental data, both the velocity and pressure fields are predicted reasonably well and the drag coefficient is in good agreement. Furthermore, it is confirmed that the drag under the road condition is smaller than that under the wind-tunnel condition.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.3
• /
• pp.32-38
• /
• 2013

This paper deals with the study on the rotordynamic and experimental analysis of turbine-generator system connected with a magnetic coupling. Although magnetic coupling has been used to torque transmission of chemical processing pump rotating at under 3,600rpm, magnetic coupling in this study is applied to high-speed turbine-generator system using a working fluid that is refrigerant such as ammonia or R-124a. Results of rotordynamic design analysis are as follows. The first, shaft diameter nearest to outer hub of magnetic coupling has a big effect on the $1^{st}$ critical speed of generator rotor. The second, if the $1^{st}$ critical speeds of turbine rotor and generator rotor have enough to separation margin in comparison to rated speed, the $1^{st}$ critical speed of turbine-magnetic coupling-generator rotor train has enough to separation margin regardless of connection stiffness of magnetic coupling. The analytical FE model is guaranteed by impact test on the prototype and condition monitoring such as measurements of vibration and bearing temperature is also performed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.47-52
• /
• 2011

In this paper, we describe the development of a finite-element model for seismic qualification. This paper presents finite-element analysis model of the electronic enclosure to be used at Arkansas nuclear power plant, USA. The verified model predicts natural frequencies within 5% error for all major modes below 50 Hz. The finite element lumped mass approach and the finite element stiffness approach using the COSMOSM finite element code is applied for static, eigenvalue, and dynamic analyses of the mathematical model of this system. The FEM model indicates that the stress levels corresponding to the specified loading conditions are below the allowable stress levels that have been specified in the AISC Code. The findings conclude that the electronic enclosure will withstand the seismic levels stated in the reference documents.

• Journal of Welding and Joining
• /
• v.27 no.2
• /
• pp.76-81
• /
• 2009

Tandem GMAW is one of the high performance welding process and used in many industries to increase the productivity. An evaluation is presented of the mechanical properties and microstructural characteristics of the Tandem GMAW and conventional Single GMAW welds in 30mm thickness 490MPa grade steel by comparison method. Welding sequence and bead with and hight was kept, avoiding the effect of the bead shape and welding sequence. Tension, bending, hardness and Charpy impact test results of Tandem GMAW met the requirement of specification and showed similar distribution with conventional Single GMAW. Volume fraction of ferrite phase in weld metal showed little difference between Tandem GMAW and Single GMAW