• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.5
• /
• pp.75-89
• /
• 2019

In the present work, structural analyses for light weight corrugate 3 layered sandwich panels are carried out. The mechanical properties of the sandwich panels are obtained using the modified analytical closed form based on a corrugated panel deformation and the homogenization scheme of an uniaxial composite. Subsequently, the mechanical properties estimated by the two aforementioned methods were employed for the numerical analyses for the corrugated sandwich panels under the specifically loading conditions, and a comparison between two methods was also made.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.2
• /
• pp.87-94
• /
• 2012

Mechanical break system used in train, that mixed air break & electronic break system. this system suggest lots of ways for modify efficiency and solution of environmental problems due to recently intend to green growth. The mechanical break system has environmental & economical problem. Environmental sides(problem) are dust and noise etc and economical sides(problem) are replaced the spare parts that are breaking shoe and lining ect. For compensate those kind of weak points, we needs a wide territories of electronic break which is from high speed range to stop. This research is estimated the load torque due to an incline and stop the train method also check the characteristic of stop the train to estimate a torque follow the sharp drop.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.527-532
• /
• 1996

Fe-Cr-Mn계 스테인리스강을 진공 용해하여 최적 소둔 조건인 1,20$0^{\circ}C$에서 30분동안 소둔 열처리한 후 미세 조직, 기계적 특성 및 부식 특성에 미치는 시효 열처리의 영향에 대하여 실험하였다. 미세 조직 분석은 광학 현미경 관찰, XRD분석, SEM분석, TEM분석 등으로 행하였고, 기계적 시험은 인장 시험, 충격 시험, 경도 시험을 행하였다. 부식 저항성을 평가하기 위해 황산, 염산분위기에서 양극 분극 시험을 행하였다. 시효 열처리에 따른 미세 조직간의 상분율 변화는 거의 없었지만 입계를 중심으로 제2상이 석출되었고, 그 양은 시효 시간이 증가함에 따라 증가하였다. 인장 강도 및 연신율은 낮은 시효 온도에서는 시효 온도와 시효 시간에 따라 큰 차이를 보이지 않았지만 고온으로 갈수록 시효 시간이 증가함에 따라 다소 감소하는 경향이 나타났다. 충격에너지는 1시간 시효시에는 시효 온도에 따라 큰 변화를 보이지 않았지만 10시간, 100시간 시효한 경우 시효 온도가 상승함에 따라 감소하였다. 이러한 경향은 고온에서 시효한 경우 입계성장이 가속화되어 나타난 것으로 판단된다. 시효 시간이 증가함에 따라 부식 환경에 관계없이 부식 저항성이 감소하였다. 85$0^{\circ}C$에서 시효한 경우 가장 우수한 내식성을 보였고, $650^{\circ}C$에서 낮은 내식성을 나타냈는데 이는 이 온도 구간에서 탄화물 등의 제2상의 석출에 의한 것으로 판단된다.

• Composites Research
• /
• v.32 no.3
• /
• pp.127-133
• /
• 2019

Although carbon nanotubes(CNTs) have outstanding theoretical mechanical and electrical properties, CNT fibers(CNTFs) have not yet reached that level. Particularly, tensile strength is only about 10% or less, so studies for making up for it are being actively conducted. As a way for improving mechanical strength, methods such as synthesizing long CNT, orientation, chemical cross-linking, hydrogen bonding and polymer infiltration are being studied. In this review paper, we report preparation methods for highly conductive and strong CNTF/Carbon composites through coating and infiltration followed by carbonization of carbon precursor polymers such as polyacrylonitrile (PAN) and polydopamine (PDA) on CNTFs.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.4
• /
• pp.167-172
• /
• 2019

The strength (MPa), hardness (Hv), shrinkage (%) and biological properties of the HAp were measured by using an organic plasticizer which facilitates the molding and heat treatment. Mechanical properties such as compressive strength, bending strength and hardness were increased with increasing amount of plasticizer, but mechanical properties were decreased when plasticizer was added more than 7 %. This is because addition of the plasticizer above the allowable value causes cracking during molding, and such cracks promote the generation of microcracks and pores at the time of sintering, resulting in a decrease in mechanical properties. As a result of the antimicrobial activity test, no bacteria were detected regardless of the addition amount of plasticizer.

• Composites Research
• /
• v.32 no.1
• /
• pp.50-55
• /
• 2019

In this study, we investigated the effect of fiber alignment in helicoidal structure on the mechanical properties of biomimetic fiber-reinforced composites. Using finite element analysis, circular biomimetic fiber composites were designed and studied. Various amounts of pressure loads were applied to a surface of the composites, and then bending and failure behaviors of the composites were analyzed. The results showed various failure morphologies according to the orientation of the fibers, and it turned out that the fiber alignment in helicoidal structure significantly improved the bending strength of the composite under pressure loading. This was because the fiber alignment in various directions for each layer dispersed effectively the fracture energy from the external load into multiple directions.

• Composites Research
• /
• v.32 no.5
• /
• pp.211-215
• /
• 2019

The cell culture process under in vitro condition is much different from the actual human body environment. Therefore, in order to precisely simulate the human body environment, a dynamic cell culture device capable of delivering mechanical stimulation to cells is essential. However, conventional dynamic cell culture devices require relatively complicated devices such as tubes, pumps, and motors, and the mechanical stimuli delivered is also simple. In this study, an electro-active polymer actuator as a driving component is introduced to design simply driven dynamic cell culture device without complicated components. The device is capable of delivering relatively complex mechanical stimuli to the cells.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.144-148
• /
• 2011

Various types of accelerators, thiuram (TMTD), thiazole (MBTS), and sulfenamide (CBS) are added into a silica filled natural rubber (NR) compound. Their effects on vulcanization properties are also investigated. TMTD shows a fast vulcanization rate and a higer maximum torque ($T_{max}$), as well as excellent mechanical properties (hardness, 300% modulus, tensile strength, elongation). MBTS shows a moderate vulcanization rate, a lower $T_{max}$, and mechanical properties. Finally, CBS shows a slow vulcanization rate but excellent mechanical properties. The same vulcanization trend can be found in carbon black filled NR compounds.

• Tribology and Lubricants
• /
• v.37 no.6
• /
• pp.213-223
• /
• 2021

Electrochemical mechanical planarization (ECMP) was developed to overcome the shortcomings of conventional chemical mechanical planarization (CMP). Because ECMP technology utilizes electrochemical reactions, it can have a higher efficiency than CMP even under low pressure conditions. Therefore, there is an advantage in that it is possible to reduce dicing and erosions, which are physical defects in semiconductor CMP. This paper summarizes the papers on ECMP published from 2003 to 2021 and analyzes research trends in ECMP technology. First, the material removal mechanisms and the configuration of the ECMP machine are dealt with, and then ECMP research trends are reviewed. For ECMP research trends, electrolyte, processing variables and pads, tribology, modeling, and application studies are investigated. In the past, research on ECMP was focused on basic research for the development of electrolytes, but it has recently developed into research on tribology and process variables and on new processing systems and applications. However, there is still a need to increase the processing efficiency, and to this end, the development of a hybrid ECMP processing method using another energy source is required. In addition, ECMP systems that can respond to the developing metal 3D printing technology must be researched, and ECMP equipment technology using CNC and robot technology must be developed.

• Journal of Space Technology and Applications
• /
• v.3 no.1
• /
• pp.72-85
• /
• 2023

Most Nanosatellites are launched in nanosatellite deployers. Nanosatellites in the deployer are turned off during launch, and they start boot sequence after deploying at their mission orbit. For this reason, nanosatellites must have deployment switch. Most of the nanosatellite deployment switch has two part, first is electric switch to boot the satellite system and second is mechanical assembly to push the switch. In most cases, electric switches are installed in the satellite main body, and the switch operations are translated via the mechanical assembly. These implementations are mechanically complicated and hard to guarantee the appropriate operation without the problems due to friction between pusher and satellite structure. This paper proposes the another implementation method of deployment switch for nanosatellites by installing the electric switch outside the main body without any kind of mechanical parts.