• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1978

Power tiller is a major unit of agricultural machinery being used on farms in Korea. About 180.000 units are introduced by 1977 and the demand for power tiller is continuously increasing as the farm mechanization progress. Major farming operations done by power tiller are the tillage, pumping, spraying, threshing, and hauling by exchanging the corresponding implements. In addition to their use on a relatively mild slope ground at present, it is also expected that many of power tillers could be operated on much inclined land to be developed by upland enlargement programmed. Therefore, research should be undertaken to solve many problems related to an effective untilization of power tillers on slope ground. The major objective of this study was to find out the travelling and tractive characteristics of power tillers being operated on general slope ground.In order to find out the critical travelling velocity and stability limit of slope ground for the side sliding and the dynamic side overturn of the tiller and tiller-trailer system, the mathematical model was developed based on a simplified physical model. The results analyzed through the model may be summarized as follows; (1) In case of no collision with an obstacle on ground, the equation of the dynamic side overturn developed was: $$\sum_n^{i=1}W_ia_s(cos\alpha cos\phi-{\frac {C_1V^2sin\phi}{gRcos\beta})-I_{AB}\frac {v^2}{Rr}}=0$$ In case of collision with an obstacle on ground, the equation was: $$\sum_n^{i=1}W_ia_s\{cos\alpha(1-sin\phi_1)-{\frac {C_1V^2sin\phi}{gRcos\beta}\}-\frac {1}{2}I_{TP} \( {\frac {2kV_2} {d_1+d_2}\)-I_{AB}{\frac{V^2}{Rr}} \( \frac {\pi}{2}-\frac {\pi}{180}\phi_2 \} = 0 $$ (2) As the angle of steering direction was increased, the critical travelling veloc\ulcornerities of side sliding and dynamic side overturn were decreased. (3) The critical travelling velocity was influenced by both the side slope angle .and the direct angle. In case of no collision with an obstacle, the critical velocity $V_c$ was 2.76-4.83m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ ; and in case of collision with an obstacle, the critical velocity $V_{cc}$ was 1.39-1.5m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ (4) In case of no collision with an obstacle, the dynamic side overturn was stimu\ulcornerlated by the carrying load but in case of collision with an obstacle, the danger of the dynamic side overturn was decreased by the carrying load. (5) When the system travels downward with the first set of high speed the limit {)f slope angle of side sliding was $\beta=5^\circ-10^\circ$ and when travels upward with the first set of high speed, the limit of angle of side sliding was $\beta=10^\circ-17.4^\circ$ (6) In case of running downward with the first set of high speed and collision with an obstacle, the limit of slope angle of the dynamic side overturn was = $12^\circ-17^\circ$ and in case of running upward with the first set of high speed and collision <>f upper wheels with an obstacle, the limit of slope angle of dynamic side overturn collision of upper wheels against an obstacle was $\beta=22^\circ-33^\circ$ at $\alpha=0^\circ -17.4^\circ$, respectively. (7) In case of running up and downward with the first set of high speed and no collision with an obstacle, the limit of slope angle of dynamic side overturn was $\beta=30^\circ-35^\circ$ (8) When the power tiller without implement attached travels up and down on the general slope ground with first set of high speed, the limit of slope angle of dynamic side overturn was $\beta=32^\circ-39^\circ$ in case of no collision with an obstacle, and $\beta=11^\circ-22^\circ$ in case of collision with an obstacle, respectively.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.62-67
• /
• 2014

A glomerular filtration rate (GFR) study is a test that uses radioactive materials or tracers (radiopharmaceuticals) and a computer to see how well the kidneys are working. Asan Medical Center analyzed and compared data between kidney depth, acquired from kidney donors' CT image and acquired from Gates method's GFR value that are calculated by Tonnesen equation. This study was able to confirm that kidney depth measured from CT image was higher than the Gates Method's GFR value, which was calculated by Tonnessen equation; the direct relationship among pathologic results is confirmed. Particularly, kidney donor whose kidney was at the pelvic area had direct relationship with other clinical results. During the GFR test, it is necessary to confirm the location of kidney has no change with reference of CT image. If kidney depth is manually corrected using CT image when we measures GFR of deformed or horse-shoe kidney, it would be possible to acquire the compatible value which is equivalent to clinical result. There would be a possible issue of appropriateness that whether the applied GFR using CT image's kidney depth has clinical validity. In case of a pediatric patient, the GFR derived from Tonnesen was quiet underestimated while manual method and Gordon stay in normal range. Which results may be correct among them? There have been many reports about kidney depth, to be an accurate index of GFR in children. As one of the study performers, we should contemplate what the best option for pediatric patients would be.

• Childhood Kidney Diseases
• /
• v.3 no.2
• /
• pp.196-202
• /
• 1999

Purpose : When the mature kidney fails to reach its norml location in the renal fossa, the condition is known as ectopic kidney. Presenting symtoms can be various and it generally depend on the associated anomaly. Beside urologic anomalies such as hydronephrosis and vesicoureteral reflux, various anomalous vascular net work, skeletal anomaly or genital anomaly can be observed in this condition. Methods : Sixteen children with ectopic kidney was studied retrospectively to analyse initial presentation, accompanied anomaly and prognosis. Results : 56% of the children were accompanied with other urologic anomalies such as true incontinence and vesicoureteral reflux that required surgical treatment. 31% of children were either diagnosed incidentally during evaluation of other non-urologic disease or during follow-up evaluation of abnormal antenatal renal sonogram. Conclusion : Ectopic kidney can be often misdiagnosed as tumorous condition or as a surgical condition depend on the abnormal location of the kidney. Careful evaluation using abdominal sonogram, DMSA, VCUG and abdominal CT scan should be performed in order to search for associated anomalous condition and for proper management.

• Childhood Kidney Diseases
• /
• v.8 no.2
• /
• pp.214-222
• /
• 2004

Purpose: Appropriate antibiotic therapy is important in childhood urinary tract infection and the selection of anibiotics is based on antimicrobial sensitivity of Escherichia coli. Extended-Spectrum ${\beta}-Lactamase(ESBL)$ is an enzyme produced by gram-negative bacilli that has the ability to hydrolyse penicillins, broad-spectrum cephalosporin and monobactam. There have been many reports of outbreaks of hospital infection by ESBL-producing organism. However, community-acquired infection with ESBL-producing organism are rare. This study was performed to retrospectively identify the incidence, characteristics and risk factors of ESBL (+) E. coli in community-acquired childhood UTI. Methods: In 288 children admitted in Ewha Womans University Hospital with E. coli UTI from Mar 2001 to February 2003, ESBL was isolated. ESBL was confirmed by the utilization of an automatized machine(Vitek GNS 433 card) using liquid medium dilution method according to National Committee for Clinical Laboratory Standard. The clinical characteristics, risk factors, antimicrobial resistance and treatment effectiveness were compared with ESBL(-) E. coli UTI. Results: Of 288 E. coli isolates, 31(10.8%) produced ESBL and 93.5%(29/31) occurred in infants younger than 6 month of age(P<0.01). No significant differences were noted in prior antibiotic use, prior admission history and underlying urogenital anomaly. Antimicrobial resistance was significantly higher in ESBL(+) E. coli compared with control patients (P<0.05). Although ceftriaxone showed 100% resistance in ESBL(+) E. coli, bacteriologic sterilization rate after ceftriaxone therapy was higher(96.8%). However, the recurrence rate of febrile UTI within 6 months was higher(25.8%) than control patients(6.6%). Conclusion: Epidemiologic study is required to find out any new risk factors of community-acquired ESBL(+) E. coli UTI and changes in selection of empirical antibiotics should be considered.

• Journal of Science of Art and Design
• /
• v.11
• /
• pp.5-35
• /
• 2007

When it comes to art, the two conflicting themes of 'scientific progress' and the 'nature' have often motivated the advent of the new mode of arts. By the late 20th century, uniform and simplified mode of arts, inspired by scientific and technological progress of that time, was gradually disillusioned by the contemporaries due to the adverse effect of science on human life. In this context, naturalism pursuing for harmony of human and the nature came up as an alternative to those living in the 21st century. The pendulum has swung from minimalism to naturalism. Though the quantitative improvement of human life cannot be denied, the uprise of such problems as environmental pollution and exhaustion of natural resources degraded the quality of human life, which, eventually, shifted the attention to the theme - 'revival of naturality.' Therefore, this thesis intends to represent the modem interpretation of the 'revival of naturality' by applying the major expressions of Art Nouveau that also emphasized naturalism. Art Nouveau found its motifs from organic figures of natural beings and put them to designs of decorative arts. This carries a historical significance in that Art Nouveau boldly revolutionized historicism, which only repeated adoption and modification of the existing modes of arts, and opened it to the modem design with new attempts to practical applications of the arts. Art Nouveau, which means 'new art', prospered from the late 19th century to the early 20th century, and even after one century, it is highly appreciated, reviving as novel and vivid forms in this contemporary art. Art Nouveau based on naturalism has revisited our contemporary period when naturalism and feminized romanticism came into fashion and its common motifs revive in different jenre of arts such as fashion, furniture, glass works, and jewelry works. This study illustrates and analyzes the works of four major artists who gave a specific attention to botanical motifs of Art Nouveau and applies decorative beauty of highly sophisticated and organic curved lines and the expressional forms of botanical figures to design. Art Nouveau proved this; the nature herself is as beautiful as she can be. Within Art Nouveau, the true humanism can be revitalized with the 'revival of naturality'. This study rediscovered the boundless potential of modern interpretation and application of Art Nouveau in decorative art and design.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.159-177
• /
• 2002

The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle and the angular velocity of the air born phase and understand the control mechanism of the high-bar movement, the somersault, the double somersault, the double somersault with full twist. For this study seven well trained university gymnastic volunteered, Zatsiorky and Seluyanov(1983, 1985)'s sixteen segment system anatomical model was used for this study. For the movement analysis three dimensional cinematographical method(Arial Performance Analysis System : APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 5.1 graphical profromming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and angular velocity were defined. As a result of this study 1. As the rotation of the body increased in the air born phase the projection angle of the CM of the total increased, this resulted the increased of the max hight of the CM. 2. In three dimensional angular velocity the Z axis(vertical direction) projection angular velocity increased as the rotation of the body increased in the airborn phase, but the Y axis and the X axis projection angular velocity did not show significant differences. 3. As the rotation of the body increased in the air born phase the angular movement of the shoulder and the hip showed significant change. These movement act as the starter in the preparation phase. 4. The somersault angle, the twist angle, the tilt angle of the upper body related to the global reference frame in the releas phase the average somersault angle of the three types of high-bar movement was $57.7^{\circ}$, $38.8^{\circ}$, $39.7^{\circ}$, the average tilt angle was $-1.5^{\circ}$, $-5.4^{\circ}$, $-8.4^{\circ}$, the average twist angle was $13.4^{\circ}$, $10.6^{\circ}$, $23.3^{\circ}$. This result showed that the somersault with full twist had the largest movement.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.4
• /
• pp.301-305
• /
• 1995

This study was conducted to find out the changes of soil physical properties and rice growth by the different soil prepartion, such as direct seeding in dry or submerged condition, tillage or no-tillage, and transplanting the infant seedlings. Soil bulk density and hardness were higher in no-tillage plots than tillage plots, and in dry-seeding plots than submerged seeding plots. Permeability of no-tillage plot was increased 56% and water requirement was also increased 27% compare to the conventional transplanting condition. In no-tillage plot, the soil water contents were so rapidly decreased that easily changed to optimum condition for machinery working. The root growth of rice was inhibited as increasing the soil bulk density at early stage, bottom of culm in no-tillage submerged plot was located 0.9cm above the soil surface and the rice plant slightly lodged. The root distribution of surface layer was higher in no-tillage plot and the heading date was 2 days earlier in no-tillage plots than tillage plots, and 3 days earlier in dry seeding plot than submerged seeding plot. Rice yields of no-tillage plots were 5.55 M/T/ha and 5.16 M/T/ha for dry and submerged seeding respectively. These yields were lower about 12.1 % in dry seeding and 18.3% in submerged seeding compare with 6.31M/T/ha of transplanting plot. Rice yields were higher at dry seeding than submerged seeding in no-tillage condition, but in tillage condition, the rice yields were better at submerged seeding plot than dry one.

• Journal of Veterinary Clinics
• /
• v.26 no.4
• /
• pp.317-323
• /
• 2009

This study was performed to evaluate the effect of intravenous administration of glycopyrrolate on cardiovascular and respiratory system in dogs given intravenous medetomidine (20 ${\mu}g$/kg) and intramuscular midazolam (0.3 mg/kg) (MM). Prior to administration of MM, glycopyrrolate was administered intravenously at doses of 5 ${\mu}g$/kg (Gly-5), 10 ${\mu}g$/kg (Gly-10) or 20 ${\mu}g$/kg (Gly-20), respectively. For the control group saline was administered intravenously. In the cardiovascular system, HR, BP, RAP, PAWP, CI, SI, SVR, and PVR were measured. RR, $V_T$, $P_{ETCO2}$, and arterial blood gas analysis were measured for respiratory system. Although rapid and satisfied depth of sedation was obtained by MM, life-threatening bradycardia, the outstanding side-effect on cardiovascular system in dogs were observed. This combination also decreased CO and increased SVR, RAP, and PAWP significantly. The bradycardia could be prevented in all the glycopyrrolate treated groups, but tachycardia was observed in Gly-10 and Gly-20 groups. Significant increases in blood pressure were shown in glycopyrrolate treated groups. Also, tachycardia depends on dose of glycopyrrolate, compensating the CO. However, these were not fully reserved. In conclusion, MM combination could induce rapid and satisfied depth of sedation but was not the suitable method for the deep sedation of dogs with cardiovascular or circulatory problems.

• Korean Journal of Weed Science
• /
• v.2 no.1
• /
• pp.20-30
• /
• 1982

A field experiment was conducted in 1981 at the Crop Experiment Station, Suweon, Korea, in machine transplanted paddy rice field, to study the effectiveness of single herbicide, mixture, and systematic application of herbicides on diversity of weed control spectrum. The rice variety planted was Taebaegbyeo, Indica ${\times}$ Japonica cross bred. Experimental field was dominated by Echinochtoa crusgalli, Eleocharis kuroguwai, and Scirpus hotarui, and importance values based on dry weight of these weeds were 89%, 5%, and 3%, respectively. The mixture or systematic treatments of herbicide were generally more effective than single herbicide applications on weed control. Coefficients of similarity based on floristic composition after herbicide application between Perfluidone (5G) and Chloromethoxynil (7G), and between Pertluidone (5G) and Bifenox (7G), and between Perfluidone (5G) and three types of Butachlor (6G) were low, and these sets seemed to be a good mixture herbicide in paddy fields. While, Perfluidone (5G) had low coefficient of similarity with other single herbicides tested. The information on coefficient of similarity could be used as parameter for selecting herbicides to increase the efficiency of herbicidal performance. Simpson's indices from Butachlor (3.5G)/SL-49 (7G), Butachlor (3.5G)/Pyrazolate (6G), and Perfluidone (5G) treatments were high, and these herbicide treatments tended to the weed community type simplified, while the indices from Perfluidone (5G) + Chloromethoxynil (7G), Butachlor (6G) fb Perftuidone (5G), and Butachlor (4G)/Naproanilide (6G) treatments were low, and these herbicide treatments caused to the community type diversified in terms of floristic composition.