• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.2
• /
• pp.33-42
• /
• 2009

A polymer-based flexible neural probe was fabricated for monitoring of neural activities from a brain. To improve the insertion stiffness, a 5 ${\mu}m$ thick biocompatible Au layer was electroplated between the top and bottom polymer layers. The developed neural probe penetrated a gel whose elastic modulus is similar to that of a live brain tissue without any fracture, To minimize mechanical residual stress and bending from the probe, two new methods were employed: (1) use of a thermal annealing process after completing the device and (2) incorporation of multiple different layers to compensate the residual stress between top and bottom layers. Mechanical bending around the probe tip was clearly removed after employing the two processes. In electrical test, the developed probe showed a proper impedance value to record neural signals from a brain and the result remained the same for 72 hours. In simple in-vitro probe characterization, the probe showed a great removal of residual stress and an excellent recording performance. The in-vitro recording results did not change even after 1 week, suggesting that this electrode has the potential for great recording from neuron firing and long-term implant performance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.72-80
• /
• 2018

In this research, we tried to investigate the influence of concrete on cracks after applying to the actual construction site using the TPS construction method which can be easily charged by the mechanical injection method. To summarize the results, the following It is as follows. First, in the case of ultrasonic velocity, it can be seen that the ultrasonic wave passes rapidly at an average of about 36 mm / sec as compared with the syringe method when using the TPS method, and in the case of the injection depth, the syringe method In the case of TPS construction method, it showed an excellent tendency that 100% of the water retentive material was charged with all the formulations under a strong injection pressure. In the case of compressive strength, it was shown that the average was increased by 16.8% at the time of using the TPS construction method, and it was found to be structurally superior. Taken together, it is possible to confirm the behavior of the crack repairing agent by improving the quality by improving the strength and confirming the window installation by filling the injection material into the closed space at the crack site when using the TPS method compared with the syringe method. In addition, it is expected that construction time will be improved by shortening the construction period of about 5 days for the TPS construction method construction section 532 m, and usability will be expanded by the crack repair method of concrete structure.

• Applied Microscopy
• /
• v.29 no.1
• /
• pp.43-56
• /
• 1999

The relationship between intravascular erythroblasts and Kupffer cells in the human fetal liver from 11 to 20 week gestation was studied ultrastructurally. The walls of the developing sinusoids consisted of two cell types devoid of basal lamina, the nonfenestrasted endothelial cells and Kupffer cells. Kupffer cells examined were easily identified by their content of phagosmes and their morphological features, and partially proliferated by mitotic division which was different way of proliferation from adult. Some extruded nuclei of acidophilic erythroblasts were trapped within Kupffer cells which exhibited various stages of intracellular digestion of the nuclei. During high activity of human fetal hepatic erythropoiesis, Kupffer cells were found in association with developing erythrob-lasts, which was similar with erythroblastic islands. The developing erythroblasts were partially surrounded by multilaminated membrane system of the Kupffer cell consisting erythroblastic island, or in contact with Kupffer cell via cytoptasmic processes in the sinu-soidal lumen. The presence of these islands was confirmed by transmission and scanning electron microscopic study. The results demonstrate that Kupffer cells in fetal heaptic erythropoiesis phagocytized expelled nuclei and contributed to erythropoiesis mechanically and physiologically by the hypertrophy and the formation of erythroblastic islands.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.1
• /
• pp.35-40
• /
• 2012

In this study, the effect of degree of milled wax layer on compositions (protein and total dietary fiber content), Alkali Digestion Value (ADV), and texture (hardness, stickiness, toughness, and adhesiveness) with brown rice was investigated. For all the rice cultivars, $Baegjinju$, $Keunnun$, $Samkwang$, and $Seolgaeng$, protein content decreased significantly as the degree of pericarp milling increased ($p$<0.05). Total dietary fiber (TDF) content for $Keunnun$ (9.56%${\rightarrow}$8.09%) and $Samkwang$ (8.05%${\rightarrow}$7.06%) significantly decreased with the degree of removed wax layer. ADV was not affected by being removed wax layer, but ADV of $Samkwang$ was increased from 3.56 to 6.78. As the degree of removed wax layer increased (0%${\rightarrow}$10%), hardness and toughness of cooked brown rice were decreased but stickiness and adhesiveness was increased. The ratio of adhesiveness to hardness was increased with decreased wax layer of brown rice. Accordingly, It suggests that the regulation of the wax layer with brown rice was effected texture of cooked brown rice. The milling technology in wax layer of brown rice is that might be thought to be very useful in rice processing industry.

• Archives of design research
• /
• v.17 no.3
• /
• pp.293-302
• /
• 2004

The austere standard for industrial design and the machine aesthetic reinforced modernism and lasted more than a half century. Pop art and Pop design movements, which were opposite of the elite culture, began to appear as anti-modernism in the late 1950s. With the development of technology, the movements helped to establish humanism design style that reflected the life style of young generation and their culture. From the 1960s. it was a try in order to fulfill psychologically users' needs beyond tasks for physical considerations. The efforts appeared as a various appearance in different contexts. It could settle down on industrial design, based on humanism both from the physical and psychological points ol views, through anti-modernism in the 1960s, commercialism, consumerism and hi-tech in the 1970s, and postmodernism in the 1980s. The design, as a specific style in industrial design, delivers both physical and psychological satisfaction to consumers by using a mixture of human emotions with high technology. Accordingly, this study is to find out and to define the design style that was applied by human emotion and sensibility in design history from the 1960s to the 1980s. It will be underpinnings for the next research about how the design style has developed nowadays.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.96-98
• /
• 1998

1. 서론 : 팔라듐이나 이의 합금막들은 높은 선택적 투과특성으로 인해 수소 정제나 분리막 반응기와 같은 산업응용 분야에서 매우 높은 관심을 갖고 있다. 상업적으로 이용되고 있는 이러한 막들은 통상적인 metallugical process에 의해 제조괸 self-supported type으로 수소 투과 속도가 낮을 뿐만 아니라 팔라듐 등은 고가의 귀금속이므로 비경제적이다. 따라서 현재 대부분의 연구자들은 기계적 강도를 유지하기 의한 다공성 지지체 위에 얇은 금속 박막을 코팅함으로서 투과성을 높이는 동시에 경제적인 복합막 형태의 막을 만드는데 연구의 촛점을 맞추고 있다. 이러한 형태의 막을 제조하기 위한 금속 박막 제조법은 무전해 도금법(electroless deposition), 화학증착법(CVD), 스퍼터링(sputtering), 전해도금법(electrodeposition) 등이 시도되었다. 그러나 수소에 대한 우수한 선택적 투과 특성을 갖기 의해서는 대부분 5$\mu$m 이상의 두꺼운 막을 제조하였으며 이보다 얇은 막의 제조에 한계가 있기 때문에 이들 막에 대한 기체 투과 특성에 대한 연구결과는 많지 않다. 본 연구에서는 기존의 전기도금법을 응용한 소위 'vacuum electrodeposition' 이란 새로운 기술을 도입함으로써 우수한 선택적 투과성을 갖는 2$\mu$m 이하의 팔라듐 합금 박막 제조를 가능하게 하였다. 지지체 표면의 거칠음 정도, 평균 기공 크기 등의 지지체 성질의 조절에 의한 금속 박막의 핀홀을 최소화함으로써 질소와 같은 inert gas의 투과도는 거의 없게 유지하는 동시에 금속 박막 두께, 결정 구조(e.g. grain size), 합금 조성 등을 조절함으로써 수소의 투과도를 높이고자 하였다. 있다. 후자의 경우, 미량의 과산화수소수 (1~10,000 ppm)를 이용해 처리 해주는 방법의 경우 경제적으로 큰 장점이 있고, 처리가 단순하다는 장점이 있으나 과산화수소수 자체에 포함하고 있는 높은 impurit level, 그리고 처리후 장시간의 flushing time을 가져야 한다는 단점등이 존재 하고 있다.요구된다. 몰입이 가능하여 임계치가 저하된 것으로 여겨진다. 또한 광학적 이득의 존재는 이 구조에 의한 극단파장 반도체 레이저다이오드의 실현 가능성을 나타내는 것이다.548 mL에 비해 통계학적으로 의의 있게 적었다(p<0.05). 결론: 관상동맥우회로 조성수술에서 전방온혈심정지액을 사용할 때 희석되지 많은 고농도 포타슘은 fliud overload와 수혈을 피하고 delivery kit를 사용하지 않음으로써 효과적이고 만족할 만한 심근보호 효과를 보였다.를 보였다.4주까지에서는 비교적 폐포는 정상적 구조를 유지하면서 부분적으로 소폐동맥 중막의 비후와 간질에 호산구 침윤의 소견이 특징적으로 관찰되었다. 결론: 분리 폐 관류는 정맥주입 방법에 비해 고농도의 cisplatin 투여로 인한 다른 장기에서의 농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았다이 낮았으나 통계학적 의의는 없었다[10.0%(4/40) : 8.2%(20/244), p>0.05]. 결론: 비디오흉강경술에서 재발을 낮추기 위해 수술시 폐야 전체를 관찰하여 존재하는 폐기포를 놓치지 않는 것이 중요하며, 폐기포를 확인하지 못한 경우와 이차성 자연기흉에 대해서는 흉막유착술에 더 세심한 주의가 필요하다는 것을 확인하였다. 비디오흉강경수술

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1007-1012
• /
• 2002

Physicochemical and organoleptic properties were investigated in starch extracted from acorn gamma-irradiated for insect control. Hunter's color L, a, and b values were unchanged upon irradiation at 0.25 to 10 kGy. Scanning electron microscopic observation revealed no changes with gamma irradiation at 1 kGy, that is effective for disinifestation, whereas 10 kGy resulted in some clefts on the starch surface. X-ray diffraction analysis showed patterns of both amorphous and crystalline regions were not different among the treatment groups. Water-binding property, swelling power, solubility, and gelatinization patterns of starch were influenced by irradiation dose, but 1 kGy dose was not detrimental to the physicochemical properties. Textural parameters of acorn gel were relatively stable, but significant reductions were found in hardness, adhesiveness, and chewiness in samples irradiated at 3 kGy or higher. Rrsults revealed that irradiation at 1 kGy or lower could be applied for insect control without causing apparent changes in physicochemical and organoleptic properties of acorn starch.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.53-58
• /
• 2012

The differences between single and mixed aluminium catalyst systems in the bulk polymerization of L-lactide were studied. $Al(O-i-Pr)_3$, TMA, TOA and TIBA were employed for the mixed-catalyst systems, and TIBA was chosen as a reference catalyst. For the $Al(O-i-Pr)_3$/TIBA catalyst system, the conversion of polymerization increased as the composition of $Al(O-i-Pr)_3$ in the mixed catalyst increased. The molecular weight of the resulting PLA reached to about 13000 g/mol, and the polydispersity index of the polymer from the $Al(O-i-Pr)_3$/TIBA catalyst was slightly increased than that of single catalyst. The higher molecular weight tail or shoulder was revealed in the GPC curve. The conversion of the TOA/TIBA catalyst system decreased as the composition of TOA in the mixed catalyst increased. The molecular weight of PLA prepared with TOA/TIBA catalysts increased up to 14000 g/mol. The Al compounds-mixed catalysts could produce a higher molecular weight tail or shoulder in the GPC curve, which may result in enhancement of mechanical properties of PLA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.326-331
• /
• 2018

Evaporative humidification using a humidifying element is used widely for the humidification of a building or a data center. The performance of a humidifying element is commonly expressed as the humidification efficiency, which is assumed to be independent of the air temperature or humidity. To verify this assumption, a series of tests were conducted under two air conditions - data center ($25^{\circ}C$ DBT, $15^{\circ}C$ WBT) and commercial building ($35^{\circ}C$ DBT, $21^{\circ}C$ WBT) - using humidifying elements made from cellulose/PET and changing the frontal air velocity from 1.0 m/s to 4.5 m/s. Three samples having a 100 mm, 200 mm, or 300 mm depth were tested. The results showed that the humidification efficiency is dependent on the air condition. Indeed, even dehumidification occurred at the inlet of the humidifying element at the air condition of commercial building. This suggests that a proper thermal model should account for the inlet area, where the amount of moisture transfer may be different from the other part of the humidification element. As the depth of the element increased from 100 mm to 200 mm, the humidification efficiency increased by 29%. With further increases to 300 mm, it increased by 42%. On the other hand, the pressure drop also increased by 47% and 86%.

• Sleep Medicine and Psychophysiology
• /
• v.25 no.2
• /
• pp.82-91
• /
• 2018

Objectives: Synchronous electroencephalogram (EEG) and functional magnetic resonance imaging (fMRI) has been used to explore sleep stage dependent functional brain networks. Despite a growing number of sleep studies using EEG-fMRI, few studies have conducted network analysis on whole night sleep due to difficulty in data acquisition, artifacts, and sleep management within the MRI scanner. Methods: In order to perform network analysis for whole night sleep, we proposed experimental procedures and data processing techniques for EEG-fMRI. We acquired 6-7 hours of EEG-fMRI data per participant and conducted signal processing to reduce artifacts in both EEG and fMRI. We then generated a functional brain atlas with 68 brain regions using independent component analysis of sleep fMRI data. Using this functional atlas, we constructed sleep level dependent functional brain networks. Results: When we evaluated functional connectivity distribution, sleep showed significantly reduced functional connectivity for the whole brain compared to that during wakefulness. REM sleep showed statistically different connectivity patterns compared to non-REM sleep in sleep-related subcortical brain circuits. Conclusion: This study suggests the feasibility of exploring functional brain networks using sleep EEG-fMRI for whole night sleep via appropriate experimental procedures and signal processing techniques for fMRI and EEG.