• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.287-290
• /
• 2001

최근 정보통신 산업의 급속한 발전으로 이동 통신용 단말기 및 반도체 칩 케리어 등의 플라스틱 부품의 초소형 경량화 요구가 증대되고 있다. 미세 사출성형용(micro injection molding) 박판의 사출을 위한 미세사출 성형 고분자 재료는 매우 우수한 용융 유동 특성을 가져야 하고, 반도체나 소형 엔지니어링 부품으로 사용하려면 높은 인장강도, 충격강도 및 치수안정성을 가져야 한다. (중략)

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.87-92
• /
• 2015

The injection molding process is widely used in the production of most plastic products. In order to make metal-colored plastic products like those found in modern luxury home alliances, metallic pigments are mixed with a basic resin material for injection molding. However, process control for metal-colored plastic products is extremely difficult due to the non-uniform melt flow of the metallic resin pigments. In this study, the effect of process parameters on the quality of a metal-colored plastic product is evaluated. A rapid mold cooling method using a compressed cryogenic fluid is also proposed to decrease the content of undesired compounds within the plastic product.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1748-1753
• /
• 2003

This paper describes the forming of fine gear housing using RP system. In order to apply 3D model formed through CAD software to RP system, it is necessary of transforming 3D model into STL file format. Besides, when the same shape is formed repetitively, we must solve the program that the shape accuracy of prototype is irregular. Therefore, we will make an experiment on influence of 3D model, file transformation and prototype on facetres, AutoCAD system value. On the basis of experimental result, we will develop an automatic file transformation program for RP. In the final process, we will manufacture on a better prototype according to the experiment result of fine gear housing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5074-5081
• /
• 2015

A method for improving the warpage of the plastic part is a method of removing residual stress of the plastic product. that a non-uniform cooling are appeared in the injection molding process make uniform cooling. this study was developed the Rapid heating and cooling device used peltier module for uniform cooling. Make the Rapid heating and cooling device(RCHD), for Traditional water cooling device(TWCD) method and the Rapid heating and cooling method warpage were compared and were analyzed and the materials used amorphous ABS polymer. various warpage were compared for the process parameters such as packing pressure, packing time, resin temperature, mold temperature, In the amorphous ABS polymer, TWCD method has higher warpage than RCHD method and show the result to be a bit more uniform cooling. The distribution state of the ABS polymer was confirmed Through the Scanning electron microscope. In the TWCD method the distribution state of the polymer be densely distributed, and RCHS method be distributed wider than TWCD method. this is that injection molded parts be seen that cooling was made uniformly, As the temperature of the mold is gradually progress, Particles of the polymer is increased this is that internal stress was reduced.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.04a
• /
• pp.24-24
• /
• 2001

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.358-365
• /
• 2009

High-frequency induction is an efficient way to rapidly heat mold surface by electromagnetic induction. In the present work, high-frequency induction heating is applied to injection molding of a mobile phone cover in order to eliminate weldlines by efficiently raising the mold temperature. Through the induction heating experiments, the maximum temperature of $143^{\circ}C$ is obtained on the mold surface in 3s of heating, which is higher than the glass transition temperature of the resin material. An injection molding experiment is then performed with the aid of induction heating, from which we can successfully remove all the weldlines of the mobile phone cover. The effect of induction heating conditions such as the heating power and the heating time on the surface appearance is experimentally investigated.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1999.06a
• /
• pp.265-268
• /
• 1999

경량 건축소재는 협소공간의 고도 이용과 건설 분야의 양적, 질적인 측면에서 급속한 성장으로 건축자재의 경량화, 고급화 및 다양화를 요구하고 있으며 이에 PE, PP, PS, PVC 등의 플리스틱 foam 및 저밀도 콘크리트 등의 경량 건축 소재에 대한 연구가 지속되고 있다. 경량 건축소재로 사용되는 플라스틱류는 대부분 난연화 및 강도유지를 위해 난연제, 섬유 및 무기충진제 등를 첨가하거나 고밀도화하여 사용하며 경량화를 위해 foaming agent를 사용하여 기포를 발생시켜 경량화하여 성형된다. (중략)

• The Optical Journal
• /
• s.101
• /
• pp.43-45
• /
• 2006

근래에 일본을 비롯하여 한국과 대만 등 아시아 여러나라에서 광학소자의 플라스틱화로 흐름이 급속히 진행되고 있는 가운데 광학소자에 생기는 성형불량을 예측하는 기술에 관심이 모아지고 있다. 도레이 주식회사에서는 3차원 유한요소 모델용 시스템을 세계에서 처음 실용화에 성공한 바 있으며, 본 고에서는 이 기술에 대해 소개하고자 한다. 광학소자에 관한 CAE 해석의 역사는 아직 시작단계지만 요구 정밀도는 상당히 높기 때문에 끊임없이 해석기술의 정밀도화에 노력하고 있다. 또 미세 V(브이)홈에 있어서 전사성 평가에 대해서도 요구가 높기 때문에 예측 기술의 확립을 도모하고 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2006.11a
• /
• pp.261-264
• /
• 2006

본 논문에서는 다양한 곡률반경의 연속에 의하여 살 두께 차가 큰 사출성형품에 불균일한 수축으로 인한 변형이 생성되어 이를 방지하기 위한 적정 CAE 냉각설계를 수행하였다. SAN 및 PMMA 재질의 Jar용기에 대한 균일냉각구조와 최적성형조건을 금형설계에 적용하고자 사출성형의 중요인자인 사출압력, 수지온도, 금형온도, 냉각조건 등을 moldflow 프로그램을 활용하여 연구를 수행하였다. 연구결과로서, 적정 변수인 사출압력 상승, 수지온도 낮춤, 급속냉각으로 후로우 등의 불량현상을 분석하였고 변형 및 불량을 극소화시킬 수 있는 냉각구조와 사이클 시간을 단축시킬 수 있는 사출성형조건을 제시하였고 적정 냉각모듈로부터 냉각시간을 단축하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5709-5715
• /
• 2012

Injection molding product is commonly used for reducing the weight of automotive vehicle, and door regulator guide rail with plastic material is also made by injection molding process. In order to improve the injection molding performance of plastic regulator guide rail, optimal molding condition is suggested by numerical simulation and DOE after obtaining the sensitivity of parameters for regulator rail manufacturing on warpage and fill time. Furthermore, multi direct gate method and optimal cooling circuit are introduced to get the uniform temperature distribution and better cooling efficiency in molding product. The effect of the proposed design on the injection molding performance is verified by the test of prototype of plastic regulator guide rail.