• Title/Summary/Keyword: 금속클립

Search Result 4, Processing Time 0.016 seconds

A Study on the Structural Performance of the Building Exterior Panel Using the Moving Clips (이동 클립을 이용한 건축물 외장재의 구조적 성능에 관한 연구)

  • Kwak, Eui-Shin;Ki, Chang-Gun;Lee, Sang-Ho;Shon, Su-Deok;Lee, Seung-Jae
    • Journal of the Architectural Institute of Korea Structure & Construction
    • /
    • v.33 no.12
    • /
    • pp.29-36
    • /
    • 2017
  • A recent global trend in the increase of earthquake-related disasters has become so frequent as to cause various damages to a wide range of mid- to high-rise buildings. Particularly, more attention is being paid to the effect of horizontal load in high-rise buildings not only on the key structural elements of the structures, but also on the possibility of the secondary damages to them due to the failure of exterior panels, which are non-structural elements, but such damages are difficult to cope with as they may be caused by unexpected changes. The present study examined exterior panels using moving clips to prevent such secondary damages on the non-structural elements and analyzed the structural performance of these exterior panels through the finite element analysis and the shaking table test. The analysis results showed that the exterior panels using moving clips satisfied the structural performance against the allowable story drift of KBC2009 and the safety of the exterior panels was verified by the shake table test.

Analysis Method for Damage Patterns of Low Voltage Switches for PL Judgment (PL 판정을 위한 저압용 스위치의 소손 패턴 해석기법)

  • Choi, Chung-Seog
    • Fire Science and Engineering
    • /
    • v.24 no.5
    • /
    • pp.136-141
    • /
    • 2010
  • The purpose of this study is to examine the structure and heat generation mechanism of low voltage switches used to turn on or off the power supply to an indoor lighting system and investigate how the fixtures and movable contacts of the switches are damaged depending on the types of energy sources in order to secure the judgment base for expected PL disputes. Based on the Korean Standard (KS) testing method for incombustibility, this study applied a general flame to the switch. In addition, current was supplied to the switch using the PCITS (Primary Current Injection Test System). The ambient temperature and humidity were maintained at $22{\pm}2^{\circ}C$ and 40~60% respectively while performing the test. It is thought that the switch generated heat due to a defective connection of the wire and clip, insulation deterioration and defective contact of the movable contact, etc. The surface of the switch damaged by the general flame was uniformly carbonized. When the flame source was removed, the fire on the switch was extinguished naturally. From the result obtained by disassembling the switch carbonized by the general flame, it could be seen that fixtures and movable contacts remained in comparatively good shape but the enclosure, clip support, movable contact, indicating lamp, etc. showed carbonization and discoloration. In the case of the switch damaged by overcurrent, the clip connecting the wires, clip support, etc. showed almost no trace of damage, but the fixtures, movable contact, indicating lamp, etc. were severely carbonized. That is, the sections with high contact resistance were intensively damaged and showed a damage pattern indicating that carbonization progressed from the inside to the outside. Therefore, it is possible to judge the initial energy source by analyzing the characteristics of the carbonization pattern and the metal fixtures of damaged switches.

Heavy Metals and Cosmetics (화장품과 중금속)

  • 김영소;정혜진;장이섭
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.28 no.1
    • /
    • pp.15-30
    • /
    • 2002
  • 최근 화장품 사용인구의 증가와 안전성에 대한 관심 증대에 따라 화장품 중 유해성분 함유에 대한 논란이 종종 있어왔다. 화장품에 대한 전문적 지식이 없는 사람들에 의하여 진행된 잘못된 정보로 인하여 화장품 중에 포함된 모든 중금속이 인체에 심각한 영향을 초래한다는 등의 오해를 불러와 관련 업계에 적지 않은 피해를 주기도 하였다. 이에 본 자료에서는 구체적 근거자료와 연구 논문들을 기반으로 유해한 중금속, 안전하여 사용이 공인된 중금속 등을 조사하여 화장품에서의 중금속의 개념을 정립하고자 하였다. 국내에서는 식품의약품안전청 고시 제2000-27호에 화장품에 포함되었을 때 유해한 중금속으로 납, 비소 및 수은을 명시하고 그 규제농도를 규정하고 있다. 규제 중금속은 아니지만 피부에 알러지를 일으키는 중금속으로는 니켈이 있는데 화장품 중 몇몇 제품군에서 소량(수∼수십ppm) 이 검출되기도 한다. 그러나 이는 일상으로 사용하는 각종 귀금속, 시계, 안경테, 클립, 지퍼 등의 금속 용품에 포함된 니켈의 양(수∼수십%)에 비하여 매우 적은 양이며 정상적인 사람에게는 무해하다. 실제 대다수의 니켈 알러지는 화장품이 아닌 귀금속이나 시계 등의 금속류 제품 등에 의하여 유발된다. 또한 많은 종류의 중금속 화합물이 화장품 원료로 사용되고 있다. 전세계적으로 널리 사용되는 것으로 크롬, 망간, 비스머스, 구리, 철, 코발트, 티타늄, 아연 등의 화합물이 있으며 이들은 각종 화장품 공정서 및 원료집 등에 수재되어 사용되고 있다. 이들 중 코발트와 크롬이 피부에 유해하다는 몇몇 보고가 있지만, 이는 이들 원소의 수용성염형태의 특정 화합물인 cobalt chloride와 chromate 및 dichromate의 염에 관한 것으로 화장품에서 사용되는 불용성 산화물인 cobalt aluminum oxide, cobalt titanium oxide, cobalt blue, chromium oxde greens 및 chromium hydroide green 등, 국제적으로 널리 사용되는 안전한 중금속 화합물과는 그 특성 및 독성이 판이하게 다르다. 따라서 화장품에서는 매우 안전한 중금속 화합물만이 사용된다. 업계는 유해 중금속에 관해서는 규제에 입각한 엄격한 품질관리에 힘쓰고 중금속의 화학적 분자구조(수용성염 vs 불용성산화물)를 구별할 수 있는 분석방법 개발에 주력하여야 한다. 그리고 안전한 화장품을 사용하고자 하는 소비자의 욕구를 충족시키고 잘못된 인식과 보도로 인하여 안전한 화장품이 유해한 것으로 오도되는 것을 막아야 할 것이다.

Seismic Performance Evaluation of Non-seismic T-bar type Steel-Panel Suspended Ceiling using Shaking Table Test (비내진 상세를 갖는 금속마감패널 천장시스템의 진동대 실험을 통한 내진성능평가)

  • Lee, Jae-Sub;In, Sung-Woo;Jung, Dam-I;Lee, Doo-Yong;Lee, Sang-Hyen;Cho, Bong-Ho
    • Journal of the Architectural Institute of Korea Structure & Construction
    • /
    • v.35 no.10
    • /
    • pp.171-180
    • /
    • 2019
  • In Korea, the seismic design of non-structural elements was interested by Earthquake of the 2016 Gyeong-ju and 2017 Po-hang. Among the non-structural elements, the ceiling system with steel panel used in Po-hang station showed failure examples of non-seismic design ceiling. In this study, the seismic performance of suspended ceiling with steel-panel, such as those used in Po-hang Station, was evaluated by shaking table tests. The shaking table tests were performed in accordance with the ICC-ES AC156 standard with floor acceleration being applied horizontally in one direction using a $3.3{\times}3.3m^2$ frame. The ceiling system consists of steel-panels, carrying channels, main and cross T-bars, and anti-falling clips. The anti-falling clip prevents the steel panel falling completely. The shaking table test confirmed that the damage at the previous stage had a direct impact on the damage state at the next stage. Through the shaking table test, the damage state of the T-bar type steel-panel suspended ceiling system was defined.