• Analytical Science and Technology
• /
• v.9 no.3
• /
• pp.279-291
• /
• 1996

The new chelating resins, XAD-2, 4, 16-TAC and XAD-2, 4, 16-TAO were synthesized by Amberlite XAD-2, XAD-4, and XAD-16 macroreticular resins with 2-(2-thiazolylazo)-p-cresol(TAC) and 4-(2-thiazolylazo)orcinol(TAO) as functional groups and were characterized by elemental analysis and FT-IR spectrometry. It was found that the content of functional group in chelating resin was 0.60mmol/g in XAD-16-TAC and 0.68mmol/g in XAD-16-TAO respectively. The chelating resins were stable in acidic and alkaline solution and can be reused over 10 times. The sorption behavior of some metalions to two chelating resins was investigated by batch method, which included batch equilibrium, effect of pH, coexisting ions and masking agent. For the optimum condition of sorption, the time required for equilibrium was about 1 hour and optimum pH was 5. In the presence of anions such as ${SO_4}^{2-}$ and $CH_3COO^-$, the sorption of U(VI) ion was slightly reduced but other anions such as $Cl^-$ and $NO{_3}^-$ revealed no interference effect. Also, sorption capacity of U(VI) ion was decreased by addition of $CO{_3}^{2-}$ ion because of complex formation of $[UO_2(CO_3)_3]^{4-}$, but alkali metals and alkali earth metals including Na(I), K(I), Mg(II), and Ca(II) were not affected for the sorption extent. Masking agent, NTA showed better separation efficiency of U(VI) ion from coexisting metal ions such as Th(IV), Zr(IV), Hf(IV), Cu(II), Cd(II), Pb(II), Ni(II), Zn(II) and Mn(II) than EDTA, CDTA.

• Membrane Journal
• /
• v.11 no.3
• /
• pp.133-139
• /
• 2001

The hydorgen ions in PVA/SSA membranes were substituted with monovalent metal ions, $Li^{+}$, $Na^{+}$, $K^{+}$, divalent metal ion forms, $Mg^{2+}$, $Ca^{2+}$, $Ba^{2+}$, trivalent metal ion forms, $Al^{+}$. The effect of exchange with metal ions was investigated through the swelling measurement and pervaporative experiments for water-ethanol and water-methanol mixtures at various operating conditions. In addition, ESCA analysis was carried out to study the substitution of the metal ions in membranes. The swelling ratio decerased in the sequence of $Li^{+}$, $Na^{+}$, $K^{+}$ and this might be due to the 'salting-out` effect while the swelling ratios for divalnet and trivalent ion-substituted membranes were affected by the combined effect of salting-out, electrostatic crosslinking and extent of metal ion substitution. For the pervaporation performance, PVA/SSA-$H^{+}$membrane showed the lowest flux and highest separation factor for all aqueous ethanol solutions. The typical results of the flux, 59 g/$m^{2}$hr and the separation factor, 44 were obtained at $50^{\circ}C$ for 90% ethanol aqueous mixture. For water-methanol solutions, the PVA/SSA membranes substituted with monovalent PVA/SSA membranes substituted with divalent and tribalent metal ions, both `salting-out` and electrostatic effects affected the pervaporative results.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.454-463
• /
• 2004

The sorption behavior of some metal ions on XAD-16-CTA chelating resin was investigated by batch method. The sorption of chelating resin was highly selective for Hf(IV), Zr(IV) and Th(IV) at pH 3.0 ~ 6.0 and the maximum sorption capacity of Zr(IV) ion was 0.81 mmol/g. It was successfully applied to the separation of several rare metal ions from mixed metal solutions by using CDTA, EDTA, NTA and $NH_4F$ as masking agent. The elution order of metal ions obtained from breakthrough capacity and the overall capacity at pH 4.0 was Zr(IV)>Th(IV)>Hf(IV)>U(VI)>Cu(II)>In(III)>Pb(II). Desorption characteristics for metal ions was investigated with desorption agents such as HCl, $HNO_3$, $HClO_4$. 2 M HCl showed high desorption efficiency. Th(IV) ion can be successfully separated from mixed metal ions by using XAD-16-CTA cheating resin.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.267-271
• /
• 1998

In order to investigate the physical properties of alginate extracted from sea tangle, Laminaria app., under various conditions, viscosity and binding capacity of metal ion (BCMI) of alginate were measured. The higher concentrations of sodium carbonate and the longer extracting time became, the lower apparent viscosity and BCMI were. BCMI in alginate reached maximum at the concentration of 0.06M metal ion. The BCMI of $Pb^{++}$ ion was the highest but $Cu^{++}$ ion was the lowest in the five metal ions. BCMI was increased in proportion as increase of viscosity in alginate.

• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.261-265
• /
• 1993

The ion exchange capacity of DBPDA ion exchanger, {(4,5):(13,14)-dibenzo-6, 9, 12-trioxa-3, 15, 21-triazabicyclo [15.3.1] heneicosa-1(21), 17, 19-triene-2, 16-dione : DBPDA ion exchanger} was 4.2meq/g. The distribution coefficients of alkali and alkaline earth metal ions in the various concentrations of hydrochloric acid were determined using DBPDA ion exchanger. Also alkali and alkaline earth metal ions were separated using DBPDA ion exchanger. From these results the effect of pH of solution and ionic radii of the metal ions on the distribution coefficients of alkali and alkaline earth metal ions were discussed.

• Journal of the Korean Vacuum Society
• /
• v.18 no.3
• /
• pp.236-243
• /
• 2009

Proton Engineering Frontier Project (PEFP) has supplied the metal ions to users by using an installed metal ion implanter of 120 keV. At present a feasibility study is being performed for a cobalt ion implantation. For a cobalt ion extraction we studied to sustain the high temperature($648^{\circ}C$) for metal ions vaporization from a cobalt chloride powder by using an alumina crucible in the ion source. The temperature condition of the crucible was satisfied with the plasma generation at the arc current of 120V and EHC power of 250W. The extracted beam current of $Co^+$ ions was dependent on the arc current in the plasma. The maximum beam current was $100{\mu}A$ at 0.18A of the arc current. The 3 peak currents of the extracted ions such as $Co^+$, $CoCl^+$ and $Cl^+$ were obtained by adjusting a mass analyzing magnet and the $Co^+$ ion beam peak current fraction as around 70% in the sum of the peak currents. The fluence of the implanted cobalt ions at the $10{\mu}A$ of the beam current and 90 minutes of the implantation time into an aluminum sample as measured around $1.74{\times}10^{17}#/cm^2$ by a quantitative analysis method of RBS (Rutherford Backscattering Spectrometry).

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.84-85
• /
• 1994

본 연구는 수용상에 포함된 중금속이온중 에멀젼 액막법(Emulsion Liquid Membranes, ELM)을 이용하여 납이온을 제거시키기 위한 연구이다. 지금까지 수용액상의 중금속 이온의 제거는 전통적으로 이온 침전법을 사용하여 왔다. 그러나 이 방법은 스럿지 처리문제가 남아 있고 식수로 이용되는 수처리에는 식수기준 만족도 때문데 적합하지 않았다. ELM법에 의한 금속이온 제거처리는 전기도금에 의하여 중금속이온을 회수할 수 있고 고도의 수처리를 가능케하여 최근 많은 관심을 갖고 있다. 본 연구에서는 납 이온 추출제로서 D2EPHA와 Alamine336의 이온교환제를 사용하여, 이 씨스테므이 추출 평형자료를 구하고 pH, 추출제의 농도, 교반속도, 에멀젼비율등에 의한 추출효과등을 검토하였다. 또한 2단계 추출 방법을 사용하여 금속이온추출에서 가장 큰 문제점인 유기상 용액의 leakage를 해결하고자 하였다.

• Journal of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.141-151
• /
• 1979

The selective absorption of metal ions by chelating agent-loaded resins was studied in aqueous media. The resins were prepared by loading the conventional anion exchange resin, Dowex 1-X8 (50 to 100 mesh) with chelating agents containing sulfonic group, such as 8-hydroxy-quinoline-5-sulfonic acid (HQS) and 7-nitroso-8-hydroxyquinoline-5-sulfonic acid (NHQS). The stability of the resin was markedly influenced by the following factors; (1) the affinity and concentration of anions in the external solution, (2) the pH of the media. The optimum conditions for the absorption of metal ions were determined with respect to the pH, shaking time, and the effect of anion concentration in the medium. Under the optimum condition the order of the absorption of metal ions such as Fe(Ⅲ), Cu(Ⅱ), Pb(Ⅱ), and Zn(Ⅱ) was in accord with that of the stability constants of the chelates. The total capacities of the resins were found in the range of 0.6∼1.6 mmole metal per gram.

• Korean Journal of Crystallography
• /
• v.10 no.1
• /
• pp.83-87
• /
• 1999

부유대용융법에 의하여 전이금속, 희토류금속, 및 3A족 금속이온의 종류와 농도를 조절하면서 Rutile 단결정을 성장하였으며, 결정결함과 1.55 ㎛에서의 광 투과도에 미치는 각 불순이온의 영향을 조사하였다. 주입된 불순이온 중에서 양호한 결정형을 나타내는 이온은 V5+, Fe3+, Al3+, Zr4+, Ga3+, Sc3+이었으며, Al3+, Zr4+, Sc3+ 이온은 우수한 투과도를 나타내었다. 성장된 결정 중에서 가장 양호한 결정형을 제공하고, 산소결핍 및 low-angle grain boundaries의 형성을 최대로 억제하며, 양호한 투과도를 나타낸 우수한 품질의 Rutile 단결정은 TiO2 99.4 at%-Al2O3 0.6 at%로 평가되었다.

• Journal of the Korean Chemical Society
• /
• v.54 no.5
• /
• pp.533-540
• /
• 2010

An activated carbon was tested for its ability to remove transition metal ions from aqueous solutions. Physical, chemical and liquid-phase adsorption characterizations of the carbon were done following standard procedures. Studies on the removal of Ni(II), Cu(II) and Fe(III) ions were attempted by varying adsorbate dose, pH of the metal ion solution and time in batch mode. The equilibrium adsorption data were fitted with Freundlich and Langmuir and the isotherm constants were evaluated, equilibrium time of the different three metal ions were determined. pH was found to have a significant role to play in the adsorption. The processes were endothermic and the thermodynamic parameters were evaluated. Desorption studies indicate that ion-exchange mechanism is operating.