• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.6
• /
• pp.773-782
• /
• 2019

Basel III (Third Basel Accord or Basel Standards) is a global, voluntary regulatory framework on bank capital adequacy, stress testing, and market liquidity risk. Basel III regulatory ratios include capital adequacy, asset soundness, and liquidity. The capital adequacy variables include BIS capital adequacy ratio, BIS tier 1 capital ratio, and tangible common equity ratio. The asset soundness variables include non-performing loan ratio and non-performing loan coverage ratio. The liquidity regulation variables include KRW liquidity coverage ratio and foreign currency liquidity coverage ratio. This study aims to investigate how capital adequacy standard affects efficiency of internet primary banks. As a result of this study, BIS capital adequacy ratio of domestic internet primary banks is lower than that of commercial banks. In order to maintain sustainable operation considering capital adequacy regulations, it is necessary to expand additional capital. In addition, the delinquency rate and non-performing loan ratio of domestic internet primary banks is gradually increasing due to the maturity of high-yield loans in 2019.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.4
• /
• pp.417-432
• /
• 2001

The pcf metal primers on the bond strength and durability of 4-META/MMA-TBB resins adhered to an Au-Ag-Pd alloy. For this study, the specimens were divided into 8 groups as follows: Thermocyle 0 : (1) control group : sandblast, (2) Group I : sandblast + Cesead Opaque Primer; (3) Group II : sandblast + Metal Primer; (4) Group III : sandblast + V-Primer; Thermocyle 10,000 (5) control sandblast: (6) Group I : sandblast + Cesead Opaque Primer: (7) Group II : sandblast + Metal Primer; (8) Group III sandblast + V-Primer. The shear bond strength was determined using an Instron were observed with the use of scanning electron microscope. Finally, the strengths of bonded joints were evaluated with regard to their adherence energy using a wedge test. The results obtained were as follows ; (1) The shear bond strength of 4-META/MMA-TBB resin to the Au-Ag-Pd alloy was significantly improved in all the groups treated with the primers (p<0.05). (2) Regardless of the adhesive primers used, a significant difference was observed in the bond strength of the thermocycle 0 groups and 10,000 groups (p<0.05). (3) Both before and after thermocycling, the strongest bond strength between the resin an the alloy was obtained after treatment with a metal primer containing MEPS (p<0.05). (4) In the wedge test, the adherence energies of the control group and Group III decreased more rapidly than those of Group I and II during the 2nd day of storage in water.

• Journal of the Korean Chemical Society
• /
• v.17 no.6
• /
• pp.439-443
• /
• 1973

2-Mercaptothiazoline is very sensitive reagent for silver, which have been used for highly selective amperometric determination of silver. A method is described for the determination of micro-quantity of silver by amperometric titration with 2-mercaptothiazoline in ammonical solution. Direct titration of milligram amount of silver (0.05∼1.00mg) is possible in the presence of a number of foreign ions in ammonical solution containing ethylenediaminetetraacetic acid as masking agent under atmosphere. The interfering elements are gold and platinum. The milligram amounts of silver can be determined by the proposed method within an error ${\pm}$5%.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.211-220
• /
• 2002

The Xiaoxinancha Cu-Au deposit in the Jilin province, located in NNE 800 km of Beijing, is hosted by diorite. The ore mineralization of Xiaoxinancha Cu-Au deposit show a stockwork occurrence that is concentrated on the potassic and phyllic alteration zones. The Xiaoxinancha Cu-Au deposit in the south is being mined with its reserves grading 0.8% Cu, 3.64 g/t Au and 16.8 g/t Ag and in the north, grading 0.63% Cu, 3.80 g/t Au and 6.8 glt Ag. The alteration assemblage occurs as a supergene blanket over deposit. Hydrothermal alteration at the Xiaoxinancha Cu-Au deposit is centered about the stock and was extensively related to the emplacement of the stock. Early hydrothermal alteration was dominantly potassic and followed by propylitic alteration. Chalcocite, often associated with hematite, account for the ore-grade copper, while chalcopyrite, bornite, quartz, epidote, chlorite and calcite constitute the typical gangue assemblage. Other minor opaque phases include pyrite, marcasite, native gold, electrum, hessite, hedleyite, volynskite, galenobismutite, covellite and goethite. Fluid inclusion data indicate that the formation of this porphyry copper deposit is thought to be a result of cooling followed by mixing with dilute and cooler meteoric water with time. In stage II vein, early boiling occurred at 497$^{\circ}$C was succeeded by the occurrence of halite-bearing type III fluid inclusion with homogenization temperature as much as 100$^{\circ}$C lower. The salinities of type 1II fluid inclusion in stage II vein are 54.3 to 66.9 wt.% NaCI + KCI equiv. at 383$^{\circ}$ to 495$^{\circ}$C, indicating the formation depth less than 1 km. Type I cupriferous fluids in stage III vein have the homogenization temperatures and salinity of 168$^{\circ}$ to 365$^{\circ}$C and 1.1 to 9.0 wt.% NaCI equiv. These fluid inclusions in stage III veins were trapped in quartz veins containing highly fractured breccia, indicating the predominance of boiling evidence. This corresponds to hydrostatic pressure of 50 to 80 bars. The $\delta$$^{34}S$ value of sulfide minerals increase slightly with paragenetic time and yield calculated $\delta$$^{34}S_{H2S}$ values of 0.8 to 3.7$\textperthousand$. There is no mineralogical evidence that fugacity of oxygen decreased, and it is thought that the oxygen fugacity of the mineralizing fluids have been buffered through reaction with magnetite. We interpreted the range of the calculated $\delta$$^{34}S_{H2S}$ values for sulfides to represent the incorporation of sulfur from two sources into the Xiaoxinancha Cu-Au hydrothermal fluids: (1) an isotopically light source with a $\delta$$^{34}S$ value of I to 2$\textperthousand$, probably a Mesozoic granitoid related to the ore mineralization. We can infer from the fact that diorite as the host rock in the Xiaoxinancha Cu-Au deposit area intruded plagiogranite; (2) an isotopically heavier source with a $\delta$$^{34}S$ value of > 4.0$\textperthousand$, probably the local porphyry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.200-213
• /
• 2000

Lasers have given dentistry a new rapid, economic, and accurate technique for metal joining. Although laser welding has been recommended as an accurate technique, there are some limitations with this technique. For example, the two joining surfaces must have a tight-fitting contact, which may be difficult to achieve in some situations. The tensile samples used for this study were made from a custom-made pure titanium and type III gold alloy plates. 27 of 33 specimens were sectioned perpendicular to their long axis with a carborundum disk and water coolant. Six specimens remained and served as the control group. A group of 6 specimens was posed as butt joints in custom parallel positioning device with a feeler gauge at each of three gaps : 0.00, 0.25. and 0.50mm. All specimens were then machined to produce a uniform cross-sectional dimension, none of the specimens was subjected to any subsequent form of heat treatment. Scanning electron microscopy was performed on representative tested specimens at fractured surfaces in both the parent metal and the weld. Vickers hardness was measured at the center of the welds with a micropenetrometer using a force of 300gm for 15 seconds. Measurement was made at approximately $200{\mu}m\;and\;500{\mu}m$ deep from each surface. One-way analysis of variance (ANOVA) and Scheffe's test was calculated to detect differences between groups. The purpose of this study is to compare the strength and properties of the joint achieved at various butt Joint gaps by the laser welding of type III gold alloy and pure titanium tensile specimens in an argon atmosphere. The results of this study were as follows : 1. When indexing and welding pure titanium, there was no decrease in ultimate tensile strength as compared with the unsectioned alloys for indexing gaps of 0.00 to 0.50mm, although with increasing gap size may come increased distortion (p>0.05). 2. When indexing and welding type III gold alloy, there were significant differences in ultimate tensile strength among groups with weld gaps of 0.00mm, 0.25 and 0.50mm, and the control group. Group with butt contact without weld gap demonstrated a significant higher ultimate tensile strength than groups with weld gaps of 0.25 and 0.50mm (p<0.05). 3. When indexing and welding the different metal combination of type III gold alloy and pure titanium, there were significant differences in ultimate tensile strength between groups with weld gaps of 0.00, 0.25, and 0.50mm. However, the mechanical properties of the welded joint would become too brittle to be acceptable clinically (p<0.05). 4. The presence of large pores in the laser welded joint appears to be the most important factor in controlling the tensile strength of the weld in both pure titanium and type III gold alloy.

• Korean Journal of Environment and Ecology
• /
• v.7 no.2
• /
• pp.135-154
• /
• 1994

To investigate the forest structure in valley of Kumpotan-Paekryunsa of Tokyusan National Park, fourty plots were set up and surveyed. According to the analysis of classification by TWINSPAN, community divided by 8 groups. The divided groups are Carpinus laxiflora-C. cordata community(I), Pinus densiflora-C. laxiflora-Quercus serrata community(II), C. laxiflora community(III), Q. mongolica-C. laxiflora community(IV), Q. spp. community(V, Ⅵ), and Fraxinus mandshurica community(Ⅶ, Ⅷ). In the analysis of ordination techniques, DBH distribution, environmental variables etc., community Ⅶ and Ⅷ were pointed out edaphic climax. So the successional trends seems to be from P. densiflora through Q. mongolica, Q. serrata to C. laxiflora, C. cordata, F. mandshurica in canopy layer. And in the subtree and shrub layer, it was expected that Rhododendron mucronulatum, Rh. schlippenbachii, Rhus trichocarpalongrightarrowAcer pseudo-sieboldianum, Lespedeza maximowiczii, Euonymus oxyphyllus, Symplocos chinensis for. pilosalongrightarrowStaphylea bumalda, Weigela subsessilis. According to the results of the analysis for the relationship between environmental variables and species, F. mandshurica correlated with exchangeable cations significantly.

• Current Research on Agriculture and Life Sciences
• /
• v.13
• /
• pp.31-44
• /
• 1995

Mt. Kumjeong is located in south-eastern part of the Korean Peninsular($129^{\circ}$01' to $129^{\circ}$05' E, $35^{\circ}$03' to $35^{\circ}$17' N) and the altitude of the summit is 802 meter. In order to find out the vegetation units which made it possible to classify subtropical forest and south-temperate forest, Mt. Kumjeong (which is located in a border of between subtropical forest and south-temperate forest) was selected as a study area. The primary result of actual vegetation analysis in Mt. Kumjeong based upon the vegetation community analysis methods by the ZM-school, and the relationships between vegetation community and two parameters(altitude, topography) analyzed by using coincidence analysis method were summarized as followings. 1. Based upon analytic methods of the vegetation community by the ZM-schools, the primary analytic result of the analysis of vegetation community in Mt. Kumjeong was divided into 10 communities, 9 groups, 2 subgroups. 2. Eurya japonica group of Pinus densiflora community out of 16 vegetation units was thought as a indicator vegetation group which made it possible to border subtropical forest and south-temperate forest. 3. Natural regeneration of Stewartia koreana group was thought to be difficult because seedling and sapling was rarely showed, 4. In relationship between vegetation units and altitude, Carpinus tschonoskii community, Quercus variabilis community, Quercus serrata community, Wisteria floribunda community,. Eurya japonica group of Pinus densiflora community, Pinus thunbergii community mainly distributed below altitude 500 meter, and Quercus mongolica community, Typical group of Pinus densiflora community, Quercus dentata community, Carpinus coreana community, Quercus acutissima community mainly distributed above altitude 500 meter. 5. In relationship between vegetation units and topography, Carpinus tschonoskii community, Quercus variabilis community, Quercus serrata community, Wisteria floribunda community,. Eurya japonica group of Pinus densiflora community distributed below middle slope, Quercus mongolica community, Typical group of Pinus densifiora community, Quercus dentata community, Carpinus coreana community, Pinus thunbergii community Quercus acutissima communily clistributed above midclle slope.

• Korean Journal of Environment and Ecology
• /
• v.11 no.1
• /
• pp.61-83
• /
• 1997

The flora of evergreen broad-leaved forest regions in the islands off the south & east seashore was undertaken three times between August to October, 1995. The total number of vascular plants surveyed in the studied areas were summarized as 434 taxa; 105 families 297 genera 380 species 49 varieties 1 subspecies and 4 formas. The vascular plants were classified as 56 taxa 32 families 53 genera 50 species 6 varieties in Mokdo, 92 taxa 47 families 80 genera 81 species 9 varieties and 2 forms in Mijo-ri, 68 taxa 47 families 65 genera 58 species 9 varieties and 1 forms in Mijodo, 57 taxa 39 families 52 genera 53 species 4 varieties in Kkamakseom, 124 taxa 59 families 105 genera 112 species 11 varieties 1 subspecies in Aedo, 90 taxa 46 families 75 genera 83 species 7 varieties in Sayangdo, 135 taxa 63 families 111 genera 147 species 13 varieties in Kumodo, 78 taxa 40 families 67 genera 69 species 9 varieties in Chudo, 142 taxa 67 families 113 genera 120 species 20 varieties and 2 forms in Mira-ri, 184 taxa 73 families 150 genera 160 species 24 varieties 1 subspecies in Maengseon-ni, and 196 taxa 79 families 156 genera 172 species 24 varieties 1 subspecies and 1 forms in Yesong-ni. Conservation measures of evergreen broad-leaved forests in the areas, at both the habitat and species levels, are urgently needed to mitigate against destructive human activities, such as unreasonable management and trampling.

• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.27-33
• /
• 2010

Objective: The need to bond orthodontic brackets onto various alloys has increased because of the increasing demand for adult orthodontic treatment. This study tried to evaluate the shear bond strength between gold alloy and metal bracket using light emitting diode (LED) light curing after metal primer and silicoating surface conditioning. Methods: Half of the type III gold alloy plates were treated with sandblasting with aluminum oxide and metal primer containing 4-META. the other half were treated with silica and silane. Metal brackets were bonded with Transbond XT light curing adhesive on these plates and shear bond strength were evaluated 1 hour, 6 hours, and 24 hours later. The differences of shear bond strength between groups were evaluated with two-way ANOVA. Results: The results showed higher bond strength in the silicoating group and a tendency of bond strength increase over time. Conclusions: When using LED curing lights for metal bracket bonding to alloy surfaces, long curing time and silicoating can produce a reliable bonding strength.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.3
• /
• pp.227-235
• /
• 2013

Molecular phylogenetic studies were conducted to evaluate taxonomic identities and relationships among 16 species of the korean genus Iris L. Korean Iris was grouped by five clades. Series Laevigatae, Tripetalae, Laevigatae and Sibiricae was included to Clade I. Series Chinensis, and Easatae was composed to Clade II. Series Chinensis was included to Clade III. Series Chinensis was composed to Clade IV. Series Crossiris, Pumilae and Pardanthopsis was included to Clade V. Iris dichotoma, I. mandshurica and I. tectorum formed one clade, and it was located mostly in the basal group. I. minutiaurea and I. koreana was not formed independent clade, so it is not clear between them about taxonomic identities. Iris tectorum was established taxonomic system by Series Cossiris in Subgenus Crossiris. Series Chinensis (I. odaesanensis, I. minutiaurea, I. koreana, I. rossii var. latifoia, and I. rossii) was distinguished is clear by Series Chinensis (I. odaesanensis, I. minutiaurea and I. koreana) and Series Chinensis (I. rossii var. latifoia and I. rossii). The Genus Iris was divided into four subgenus (Limniris, Crossiris, Iris and Pardanthopsis). We thought that evolved to subgenus Limniris in subgenus Crossiris, iris and Pardanthopsis.