• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.376-383
• /
• 2011

The CMCs of LA and LA3 nonionic surfactants obtained from the reaction between glycidol and lauryl alcohol were found to be $0.97{\times}10^{-3}mol/L$ and $1.02{\times}10^{-3}mol/L$ respectively and the surface tensions for 1 wt% surfactant were 26.99 and 27.48 mN/m respectively. Dynamic surface tension measurements using a maximum bubble pressure tensiometer showed that the adsorption rate of surfactant molecules at the interface between the air and the surfactant solution was found to be relatively fast in both surfactant systems, presumably due to the high mobility of surfactant molecules. The contact angles of LA and LA3 nonionic surfactants were 27.8 and $20.9^{\circ}$ respectively and the dynamic interfacial tension measurement by a spinning drop tensiometer showed that interfacial tensions at equilibrium condition in both systems were almost the same. Also both surfactant systems reached equilibrium in 2~3 min. Both surfactant solutions showed high stability when evaluated by conductometric method and the LA nonionic surfactant system provided the higher foam stability than the LA3 nonionic surfactant system. The phase behavior experiments showed a lower phase or oil in water (O/W) microemulsion in equilibrium with an excess oil phase at all temperatures studied. No three-phase region was observed including a middle-phase microemulsion or a lamellar liquid crystalline phase.

• Korean journal of applied entomology
• /
• v.60 no.2
• /
• pp.193-199
• /
• 2021

Solenopsis japonica, which is belonging to Formicidae in Hymenoptera, is a native ant species in Korea. However, it had not been studied for cold hardiness of S. japonica to understand on its overwintering mechanisms in field so far. Cold tolerance on developmental stages was measured at different cold temperature with various exposure times. Workers showed more survival at 5℃ and 10℃ compared with other stages and elevated cold tolerance when workers were exposed at 15℃ for more than 12h incubation as a rapid cold hardening (RCH) condition. RCH treatment not only increased survival of workers at cold temperatures, but also decreased supercooling point (SCP) and freezing point (FP). RCH group increased the survival rate by 44% at 10℃ compared with Non-RCH group. SCP and FP were depressed from -10.0 to -14.2℃ and from -11.3 to -15.3℃, respectively, after RCH treatment. Cold temperature increased expression level of cold- and stress-related genes such as glycerol kinase and heat shock protein. These results indicate unacclimated cold tolerance of S. japonica and its acclimation to low temperature by RCH.

• Applied Chemistry for Engineering
• /
• v.25 no.5
• /
• pp.455-462
• /
• 2014

This work investigated the hydrophobic coating of silicate yellow phosphor powder in the form of divalent europium-activated strontium orthosilicate ($Sr_2SiO_4:Eu^{2+}$) by using an atmospheric pressure dielectric barrier discharge (DBD) plasma with argon as a carrier and hexamethyldisiloxane (HMDSO), toluene and n-hexane as precursors. After the plasma treatment of the phosphor powder, the lattice structure of orthosilicate was not altered, as confirmed by an X-ray diffractometer. The coated phosphor powder was characterized by scanning electron microscopy, fluorescence spectrophotometry and contact angle analysis (CAA). The CAA of the phosphor powder coated with the HMDSO precursor revealed that the water contact angle increased from $21.3^{\circ}$ to $139.5^{\circ}$ (max. $148.7^{\circ}$) and the glycerol contact angle from $55^{\circ}$ to $143.5^{\circ}$ (max. $145.3^{\circ}$) as a result of the hydrophobic coating, which indicated that hydrophobic layers were successfully formed on the phosphor powder surfaces. Further surface characterizations were performed by Fourier transform infrared spectroscopy and X-ray photoelectron spectrometry, which also evidenced the formation of hydrophobic coating layers. The phosphor coated with HMDSO exhibited a photoluminescence (PL) enhancement, but the use of toluene or n-hexane somewhat decreased the PL intensity. The results of this work suggest that the DBD plasma may be a viable method for the preparation of hydrophobic coating layer on phosphor powder.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.1
• /
• pp.13-20
• /
• 2005

The effects of pectin on obesity was studied using 3T3-L1 pre-adipocytes and rats fed 20% high fat diets. The concentration of leptin released from 3T3-L1 adipocytes in the presence of pectin was significantly decreased by 85% compared to that of the control (p<0.05), however, glycerol concentration was not changed. These data indicate that pectin seems to inhibit lipids accumulation in the adipocytes rather than enhance the lipolytic activity. Forty Sprague Dawley rats were fed 20% high fat diet for 8 weeks to induce obesity and then divided equally into four groups. Experimental groups were normal diet group (ND), high fat diet group (HFD), HDF with 10% pectin group (HFP10), and HDF with 20% pectin group (HFP20). Diet for the each group was prepared to be iso-caloric following AIN-76 guideline. After obesity was induced, rats were placed on an restricted diet for 9 weeks. The body weight of HFD increased 50% (p<0.05) compared to the ND, while it was decreased by 12% and 16% for HFP10 and HFP20, respectively (p<0.05). The relative amount of visceral fats for HFDl0 and HFD20 were decreased by 45% and 59% compared to that of HDF (130%), respectively (p<0.05). Pectin seems to have a greater effect on reducing visceral fats accumulation than weight reduction. Significantly increased level of triglyceride, total cholesterol or LDL-cholesterol in the plasma of HFD was returned to the normal or even below the normal by pectin diet, while the level of HDL-cholesterol increased. Lipid lowering effect was also observed in the liver and heart. These effects of pectin were dosedependent. In conclusion, the beneficial effect of pectin on the obesity was observed from cell culture experiment and animal study in terms of inhibiting the accumulation of lipids in the adipocytes.

• Korean Journal of Poultry Science
• /
• v.41 no.1
• /
• pp.21-27
• /
• 2014

To preserve chicken genetic materials like cryopreserved spermatozoa, various kinds of freezing agents like glycerol, dimethylsuloxide, dimethylformamide or dimethylacetamide have been used for rooster semen preparation. Recently, the usage of N-methylacetamide (MA) for Ogye rooster semen preservation resulted in hatched chicken successfully. In this study, we investigated the effects of 7, 9 and 11% of MA on the viability, fertility and hatchability of frozen-thawed rooster semen using artificial insemination. The results of viability, fertility and hatchability in frozen semen with 7%, 9% or 11% MA were $35.16{\pm}6.12%$, $67.83{\pm}15.3%$ and $66.2{\pm}16.3%$ of motile sperm rate, 21.5%, 34.7% and 25% of fertility rate, and 100%, 89.5% and 87.5% of hatchability rate. The results of control group with frozen semen were 96.0% of fertility rate and 92.2% of hatchability rate. With these results, the concentration range of MA as a freezing agent of rooster semen could be 7~9% of media. The higher concentration of 9 % MA could decrease the fertility rate of thawed semen not the rate of hatchability rate. So the use of MA without affecting fertility rate would be a key point of freezing method of rooster semen for poultry genetic resource preservation.

• Applied Biological Chemistry
• /
• v.42 no.3
• /
• pp.229-234
• /
• 1999

The effects of linoleic acid(LA, 18 : 2) and/or bovine serum albumin(BSA) on the lipid metabolism in human hepatoma cell line HepG2 cells were evaluated. HepG2 cells were cultured in basal Dulbecco's modified Eagle's(DME) medium(Basal medium), DME medium containing 0.2 mM LA(LA medium), or DME medium containing both 0.2 mM LA and 0.2-1.0% BSA(LA+BSA medium). $[^{14}C]Acetate(0.3\;{\mu}Ci/ml\;medium)$ was added as a radioactive lipid precursor and the cells were incubated for 6 hours. An addition of LA to basal medium resulted in a decrease in the incorporation of $[^{14}C]acetate$ into total cholesterol fraction. In contrast, an addition of BSA to LA-containing medium tended to increase the incorporation of $[^{14}C]acetate$ into total cholesterol. The alteration of cholesterol metabolism in HepG2 cells incubated in LA+BSA medium was attributed by an increase in the incorporation of $[^{14}C]acetate$ into free cholesterol, but not cholesteryl ester fraction. In addition, the secretion of cholesterol was increased by LA+BSA medium, suggesting that BSA stimulates cholesterol secretion. No significant change in the incorporation of $[^{14}C]acetate$ into cellular total lipids was observed among the experimental groups. However, an increased incorporation of $[^{14}C]-labelled$ fatty acid into cellular triacylglycerol and decreased incorporation into phospholipid were observed in cells incubated with LA+BSA medium as compared to those of LA medium. The secretions of $[^{14}C]-labelled$ triacylglycerol, phospholipid, and free fatty acid were also stimulated in HepG2 cells incubated with LA+BSA medium. In conclusion, the present study suggests that in human hepatocytes, LA and BSA influence lipid metabolism, and BSA enhances the secretion of lipids.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.762-767
• /
• 2009

In this study, the feasibility of using vegetable oil extracted from tropical crop seed as a biodiesel feedstock was investigated by producing biodiesel and analysing the quality parameters as a transport fuel. In order to produce biodiesel efficiently, two step reaction process(pre-treatment and transesterificaion) was required because the tropical crop oil have a high content of free fatty acids. To determine the suitable acid catalyst for the pre-esterification, three kinds of acid catalysts were tested and sulfuric acid was identified as the best catalyst. After constructing the experimental matrix based on RSM and analysing the statistical data, the optimal pre-treatment conditions were determined to be 26.7% of methanol and 0.982% of sulfuric acid. Trans-esterification experiments of the pre-esterified oil based on RSM were carried out, then discovered 1.24% of KOH catalyst and 22.76% of methanol as the optimal trans-esterification conditions. However, the quantity of KOH was higher than the previously established KOH concentration of our team. So, we carried out supplemental experiment to determine the quantity of catalyst and methanol. As a result, the optimal transesterification conditions were determined to be 0.8% of KOH and 16.13% of methanol. After trans-esterification of tropical crop oil, the produced biodiesel could meet the major quality standard specifications; 100.8% of FAME, 0.45 mgKOH/g of acid value, 0.00% of water, 0.04% of total glycerol, $4.041mm^2/s$ of kinematic viscosity(at $40^{\circ}C$).

• Korean Journal of Weed Science
• /
• v.30 no.4
• /
• pp.340-360
• /
• 2010

The depletion of fossil fuels, ecological problems associated with $CO_2$ emissions climate change, growing world population, and future energy supplies are forcing the development of alternative resources for energy (heat and electricity), transport fuels and chemicals: the replacement of fossil resources with $CO_2$ neutral biomass. Several options exist to cover energy supplies of the future, including solar, wind, and water power; however, chemical carbon source can get from biomass only. When used in combination with environmental friend production and processing technology, the use of biomass can be seen as a sustainable alternative to conventional chemical feedstocks. The biorefinery concept is analogous to today's petroleum refinery, which produce multiple fuels and chemical products from petroleum. A biorefinery is a facility that integrates biomass conversion processes and equipment to produce fuels, power, and value-added chemicals from biomass. Biorefinery is the co-production of a spectrum of bio-based products (food, feed, materials, and chemicals) and energy (fuels, power, and heat) from biomass [definition IEA Bioenergy Task 42]. By producing multiple products, a biorefinery takes advantage of the various components in biomass and their intermediates therefore maximizing the value derived from the biomass feedstocks. A biorefinery could, for example, produce one or several low-volume, but high-value, chemical or nutraceutical products and a low-value, but high-volume liquid transportation fuel such as biodiesel or bioethanol. Future biorefinery may play a major role in producing chemicals and materials as a bridge between agriculture and chemistry that are traditionally produced from petroleum. Industrial biotechnology is expected to significantly complement or replace the current petroleum-based industry and to play an important role.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.6
• /
• pp.776-783
• /
• 2005

To develop functional kimchi which had anti-obesity effect, garcinia cambogia extract containing $51.46\%$ hydroxy citric acid (HCA) was used as a sub-ingredient of American preferred kimchi (APK). The APK added to garcinia cambogia extracts of 0.5$\%,\;1.0\%,\;1.5\%\;and\;2.0\%$ were prepared, and fermentation characteristics and anti-obesity effect of those kimchi were investigated. The pH of APK added to garcinia cambogia extracts (APKH) was low as the amount of garcinia cambogia extract increased at initial stage of fermentation but the pH of those kimchi showed similar values after optimum ripened stage. The number of Lactobacillus sp. and Leuconostoc sp. were small as the amount of garcinia cambogia extract increased while the period was delayed that the number of Lactobacillus sp. and Leuconostoc sp. attained to maximum. In Hunter's color values of APKH, lightness and redness decreased as the amount of garcinia cambogia extracts increased while yellowness increased. Sensory scores in overall acceptance, taste and texture of APKH evaluated by Americans as sensory panels were similar until the addition amount of garcinia cambogia extract was $1.5\%$, therefore the garcinia cambogia extract of $1.5\%$ was determined as tile amount adding to APK. The secretions of glycerol and leptin as a key signalling factor for anti-obesity effect were examined in APK and APKH added to garcinia cambogia extract of $1.5\%$. There were no significant differences in the glycerol secretion when adipocytes were treated with APK and APKH extracts. However, leptin secretion in the adipocytes treated with APKH extract was significantly decreased compared to that of control (p<0.05).

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.4 s.54
• /
• pp.337-342
• /
• 2005

The aim of this study was to evaluate the influence of different skin care ingredient concentrations on the effect of polyols and oils on the human skin moisturization and skin surface roughness. Polyols and oils were essential ingredients to make a skin care formulation. But these were still not understood how much concentration(s) were tested on human skin in the aspect of efficacy and sensory. We studied to examine various concentrations of ingredient by cosmetic companies using noninvasive methods. Polyols were composed of glycerol and butylene glycol (BG) as 1:1 ratio, and oils were hydrogenated polydecene, cetyl ethylhexanoate and pentaerythrityl tetraethylhexanoate (PTO(R), Stearinerie Dubois Fils Co., France) as 1:1:1 ratio. All compounds were tested $0{\sim}27%dml$ Polyols and $0{\sim}35%dml$ oils in O/W emulsions. We investigated the effect of water contents and the effect of stratum corneum roughness in forearm skin after application of compounds. Water contents of the skin measured by skin capacitance and skin surface roughness measured visual scoring of skin surface biopsy through the scanning electron microscopy. Water contents of the skin were highly related to amount of polyols (to 20%) and oils (to 12%). Correlation coefficients were 0.971 and 0.985 respectively (p<0.01), 2 h after application. Skin surface roughness was positively correlated with polyol contents in concentration dependent manner, and depend on oils up to 6%. The ratio of coefficient was 2.5 to 1 (polyol to oils) by regression analysis. Further studies will be conducted with other ingredients such as surfactants, lipids and aqueous materials, and with ether methods for noninvasive measurement.