• Title/Summary/Keyword: 글로우방전

Search Result 35, Processing Time 0.024 seconds

글로우방전을 이용한 생체시료 중 극미량성분분석에 관한 연구

  • 김효진
    • Proceedings of the Korean Society of Applied Pharmacology
    • /
    • 1994.04a
    • /
    • pp.275-275
    • /
    • 1994
  • 생체시료 중 극미량성분분석에 관한 필요성이 높아지고 있으며 기존의 분석기기를 사용하여 분석방법을 개발하는 연구나 새로운 분석기기를 개발하는 연구들을 통하여 이들 물질들을 분석하고자 하고있다. 특히 극미량성분인 경우 생체내에 수십 Pg이 존재하면서 이들의 농도변화가 생리활성에 변화를 주기 때문에 검출한계가 낮은 검출기가 필요하게되며 또한 생체시료중의 여러물질들로 인하여 이들을 분리하는 크로마토그라피기술과 이들이 분리된 후 실제로 어떠한 물질인지를 확인할 수 있는 즉 정성까지 가능한 검출기의 개발이 요구되고 있다.

  • PDF

Effects of Mg content ratio on the structure and corrosion properties of Al-Mg films (Mg 성분비율이 Al-Mg 박막의 조직 변화와 부식 특성에 미치는 영향)

  • Jeong, Jae-Hun;Yang, Ji-Hun;Song, Min-A;Kim, Seong-Hwan;Jeong, Jae-In
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2015.11a
    • /
    • pp.163-163
    • /
    • 2015
  • 아연(Zn)을 대체할 수 있는 물질계 인 알루미늄(Al)과 마그네슘(Mg)을 본 연구에서는 In-Line PVD 장치의 스퍼터링 소스를 이용하여 냉연강판 위에 코팅하고 열처리를 실시하여 전자현미경 및 글로우방전 분광기를 이용한 코팅층의 특성 분석 및 염수분무시험을 통해 내식성을 평가하였다.

  • PDF

Effects of Mg content ratio and heating conditions on the structure and corrosion properties of Al-Mg films (Mg 성분비율 및 열처리 조건이 Al-Mg 박막의 조직 변화와 부식 특성에 미치는 영향)

  • Jeong, Jae-Hun;Yang, Ji-Hun;Song, Min-A;Kim, Seong-Hwan;Jeong, Jae-In
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2014.11a
    • /
    • pp.22-22
    • /
    • 2014
  • 아연(Zn)을 대체할 수 있는 물질계 인 알루미늄(Al)과 마그네슘(Mg)을 본 연구에서는 전자빔 증착을 이용하여 냉연 강판 위에 다층으로 코팅하고 열처리를 실시하여 전자현미경 및 글로우방전 분광기를 이용한 코팅층의 특성 분석 및 염수 분무시험을 통해 내식성을 평가하였다.

  • PDF

Glow Discharge as Detector for Gas Chromatography (글로우방전을 이용한 가스크로마토그라프 검출기의 개발)

  • 김효진;박일영;장성기;김박광;박만기
    • YAKHAK HOEJI
    • /
    • v.37 no.1
    • /
    • pp.76-83
    • /
    • 1993
  • The changes in discharge current, emission and/or oscillation frequency of the electric oscillation of a glow discharge are the potential sensitive measure of the concentration of an impurity in the argon plasma supporting gas. A single jet enhanced glow discharge has been interfaced with the gas chromatograph via 1/8" O.D. tube with a heating pad to study the changes in discharge current. To investigate the optimum operating conditions of the glow discharge system as detector for gas chromatography, pressure, gas flow rate, discharge current, distance between the anode and the cathode have been studied.

  • PDF

Effect of Discharge Gas on the Electrical Characteristics of the Glow Discharge Plasma for the Gas Chromatographic Detector (글로우방전 가스크로마토그라프 검출기에서 방전가스의 영향)

  • 박현미;강종성;김효진
    • YAKHAK HOEJI
    • /
    • v.39 no.5
    • /
    • pp.480-486
    • /
    • 1995
  • The change in discharge current of a glow discharge has been shown the potential sensitive detector for gas chromatography. To investigate the effect of carrier gas on the electrical characteristics of the discharge and the peak response, the discharge pressure, gas flow rate, and discharge gap have been studied. The discharge gas included the Ar, He, and N$_{2}$. The gas flow rate has been found one of the important parameters to affect both the electrical characteristics and the peak response.

  • PDF

Analysis of dominant impurities in Cu and Ta films using SIMS and GDMS (SIMS와 GDMS를 이용한 구리와 탄탈 박막내의 주요불순물 분석)

  • ;Minoru Isshiki
    • Journal of the Korean Vacuum Society
    • /
    • v.13 no.2
    • /
    • pp.79-85
    • /
    • 2004
  • Secondary ion mass spectrometry(SIMS) and glow discharge mass spectrometry(GDMS) were used to determine the impurity concentrations of hydrogen, carbon, and oxygen elements in the Cu and Ta films, and the results of SIMS and GDMS analysis were carefully considered. The Cu and Ta films were deposited on Si (100) substrates at zero substrate bias voltage and a substrate bias voltage of -50 V(Cu films) or -125 V(Ta films) using a non-mass separated ion beam deposition method. As a result of SIMS with Cs+ ion beam, in the case of the Cu and Ta films deposited without the substrate bias voltage, many strong peaks were observed, which is considered to be detected as a the cluster state such as CxHx, OxHx, CxOxHx. All the peaks of SIMS results could be interpreted by the combination of these dominant impurities. Moreover, it was confirmed that the quantitative results of GDMS analysis were accordant to the SIMS results.

Development of a New Analytical Instrument with Glow Discharge System and Studies on the Direct Solid Analysis Method (글로우방전을 이용한 새로운 정밀분석기기의 개발 및 금속시료의 직접분석법에 관한 연구)

  • Jeoung Hwa Park;Hyo Jin Kim;Jin Chun Woo;Chang Joon Park;Dae Won Moon;Kwang Woo Lee
    • Journal of the Korean Chemical Society
    • /
    • v.36 no.2
    • /
    • pp.273-281
    • /
    • 1992
  • A new sputtering chamber, as Atomsource, for atomic absorption measurements was designed and built to have maximum ground state atoms in view and minimum emission. The high velocity gas jets not only change the visual and electrical characteristics of the discharge, but also increase the amount of material atomized, as is apparent from the craters that are produced in the sample where the jets strike the surface. The use of gas jets in a sputtering cell makes this a direct sampling method practical for atomic absorption spectrometry. The factors influencing absorption sensitivity and reproducibility have been investigated for the newly developed atomizer.

  • PDF

Study on the Plasma Oscillation for Gas Chromatographic detector (플라즈마진동을 이용한 기체크로마토그래프의 검출기에 대한 연구)

  • Kim, Hyo Jin;Mang, Dae Young;Kang, Jong Seong
    • Analytical Science and Technology
    • /
    • v.6 no.4
    • /
    • pp.369-374
    • /
    • 1993
  • Plasma oscillation has been observed during the development of the glow discharge as detector for gas chromatography. The variation of oscillation frequency shows the better stability and detection limits than the changes in the dischange curent. To investigate the range of useful operating conditions and to gain insight into the mechanism, the effect of experimental parameters on plasma oscillation have been studied. This study includes the variation of discharge current, pressure and discharge gap. Frequency ranges of 10KHz to 10MHz have been observed with the various shapes of oscillation. Two kinds of mode for oscillation are observed with the variation of electrode gap at low pressure and low voltage.

  • PDF