• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.65-69
• /
• 1991

소음제어대책 수립시, 흡음구조는 공조용소음기, 공업용소음기, Enclosure, 실 내 흡음판등에 폭넓게 이용되고 있다. 흡음구조의 재료중 글라스울은 뛰어난 흡음성능과 고온에서의 내구성 및 난연성등으로 인하여 여러 흡음재료중에 서 가장 많이 이용되고 있으나 글라스율 미립자의 비산 및 강도문제로 글라 스율에 글라스 클로스(Glass Cloth), P.E.Film등과 같은 글라스울 비산방지막 과 유공함석판을 붙인 흡음구조체로 제작하여 이용하는 것이 일반적이다. 국 내외적으로 글라스울만의 흡음율 데이타는 각종 문헌등에 많이 발표되어 있 으나 글라스울에 글라스울 비산방지막과 유공함석판을 붙인 흡음구조체의 흡음율데이타는 거의 없는 실정이다. 본 연구에서는 이러한 글라스울 흡음구 조체의 글라스울의 밀도, 글라스울 비산방지막의 종류, 유공함석판의 유공치 수 등에 따른 흡음특성을 잔향실법 흡음율측정방법에 의해 측정 평가하고 이들을 상호 비교검토하여 각종 소음 제어대책의 기초 설계자료로 제시하고 자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6816-6822
• /
• 2015

In this study, silica aerogel-glass wool composites were developed for improvement of thermal conductivity and overcoming the water adsorption of glass wool boards. Silica aerogel-glass wool composites were prepared by glass wool and silica aerogel with liquid binder. Mixtures with binder were composed of CMC (carboxymethyl cellulose) and silica aerogel for glass wool board. Silica aerogel-glass wool composite boards were had $0.065g/cm^3$ density by impregnation silica aerogel where from origin glass wool board at $0.048g/cm^3$ density. Thermal conductivity of silica aerogel-glass wool composites were 0.0315 W/mK (up to 7.4% thermal resistance) and fire penetration time came to 362 seconds (up to 2.7 times stronger than origin glass wool board). In addition, hydrophobic aerogel characteristics prevented the adsorption of water onto silica aerogel-glass wool composite boards that was good for lightweight.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.117-123
• /
• 2016

Glass wool is a material that has been used as a heat insulator in various fields including construction industry. Since it is a nonflammable material, it does not generate toxic gases on fire, and thus public agencies recommend using glass wool as a heat insulator instead of other organic materials. However, repeated drying and wetting cycles can deteriorate thermal property of glass wool due to the shrinkage and reduction in pore size. For this reason, it needs to be replaced periodically, and waste materials are generated. This research aims to utilize waste glass wool as additives for increasing mechanical properties of concrete. According to the experimental results, it was found that glass wool has weak pozzolanic activity, and beneficial effect on both compressive and flexural strength. The optimum amount found in this experimental work was 0.5% volumetric addition to the concrete.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.4
• /
• pp.328-334
• /
• 2015

Building insulation materials use for the purpose of energy saving. Insulation materials can be classified inorganic and organic insulation materials. Inorganic insulation is used for fire resistive performance parts and organic insulation is used for thermal performance parts. Meanwhile, organic insulation is due to toxic gas emission in fire. Inorganic insulation is too heavy and low thermal performance than organic materials. This study is focused on evaluation of the physical properties of inorganic foam material using industrial by-products such as waste glass powder and fly ash. From the test result, inorganic foam materials for the applicability of fire-resistance and insulation light-weight materials.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.323-330
• /
• 2018

This study investigated effects of absorbent gypsum board in the ceiling on low-frequency heavyweight floor impact sound through sound absorption coefficient and floor impact sound measurement. The sound absorption coefficients were measured with sound absorbent gypsum board, glass wool on gypsum board, and a double panel absorbent gypsum board (absorbent gypsum board + glass wool + absorbent gypsum board). Result showed that the absorbent gypsum board had sound absorption coefficient of 0.1 ~ 0.7 from 200 and 630 Hz octave band. The sound absorption coefficient was increased in all frequency range by adding glass wool. Additional absorbent gypsum board increased sound absorption coefficient up to 250 Hz octave band, but decreased over 250 Hz. Heavyweight floor impact sounds were measured in test building for three materials above, gypsum board, and bare slab. Result showed that glass wool on gypsum board and a double panel absorbent gypsum board reduced by 3 dB ~ 4 dB (single number quantity) heavyweight floor impact sound. Comparing with bare slab condition, floor impact sound reduction was mainly found from 125 Hz to 500 Hz octave band, and the maximum reduction was shown in the 250 Hz octave band.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.6
• /
• pp.604-608
• /
• 2015

In this paper, we study the characteristics of heat transfer for an insulated multi-core tube using glass wool as an insulator for the multi-core tube. By performing experiments and modeling, we examine the variations in the temperature characteristics of hydraulic oil inside the multi-core tube with atmosphere temperature, inlet temperature, and the flow rate of hydraulic oil for the insulated multi-core tube that we developed. When the minimum inlet flow rate of hydraulic oil employed within the scope of the research is 0.29 l/min, the temperature difference obtained in the experiments and numerical analysis was a maximum of $3^{\circ}C$. For a constant atmospheric temperature, as the inlet temperature of the hydraulic oil increases, the outlet temperature of the hydraulic oil will also increase, regardless of its inlet flow rate. Further, when the inlet flow rate of the hydraulic oil is more than 1.01 l/min, the effect of the atmospheric temperature on the temperature drop of the hydraulic oil is low.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.349-352
• /
• 2012

본 연구에서는 주택화재가 발생할 경우, 건축용 외장재로부터 발생하는 유해성 가스를 분석하고자 주택화재재연실험을 수행하였다. 실험 방법으로는 스티로폼, 우레탄폼, 글라스울 소재의 샌드위치 패널을 대상으로 KS F 2271 규격을 이용한 실험용 생쥐의 생체반응을 실험하였으며, NES 713을 이용한 독성가스에 대한 분석을 실시하였다. 샌드위치패널에서 발생하는 대표적인 유해성 가스는 시안화수소와 일산화탄소이며, 그 중에서 가장 유독한 것은 시안화수소로서 2차 세계대전 당시 유대인 학살에 사용된 독가스인데 시안화수소를 사람이 흡인한 경우 750ppm 이상이면 즉사하며, 375ppm 이상이면 30분 내에 사망하는 것으로 알려져 있다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.188-191
• /
• 2011

현대사회는 기술의 발전으로 인하여 초고층 건축물과 미적 감각을 최대한 활용한 각종 구조별, 형상별 건축물들이 등장하였다. 따라서 이에 사용되는 건축 자재들이 다양화됨에 따라 화재 발생 시 유독가스생성 및 빠른 화재 확산으로 이어질 수 있는 위험성들이 잠재되어 있다. 이러한 화재위험을 최소화하기 위하여 국내에서는 KS F 2257-1:(건축 부재의 내화 시험 방법)이 제정되어 현재까지 구조물의 화재성능을 확인하고 있다. 이에 따라 내화벽 및 방화문이 건축물에 설치되어 건축물의 하중이 크게 증가하고 있다. 따라서 본 연구에서는 기존에 활용되지 않은 소재를 활용하여 목재 방화문을 제작하였으며, 이에 따른 성능을 분석하였다. 그 결과 내화 직물원단은 13분, 글라스울은 17분의 내화성능이 있는 것으로 확인되었으며, 난연 목재로 제작된 심재의 탄화를 보강할 불연 심재를 사용하여 개발 방향을 설정해야 할 것으로 분석되었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.403-412
• /
• 2021

Despite strengthening requirements for fire retardancy and applied buildings of insulation panels, the number of fires and influence of damage have increased. In this study, the thermal effects were evaluated as the separation distances, and three types of EPS panel, glass wool panel, and gypsum board panel were then selected. Temperature sensors on the panels were installed vertically from the ground. The fire source on the lamination layer of lumber was ignited by changes in the separation distances (0 cm, 25 cm, 50 cm) from the panels. The test results suggested that the maximum temperature was 349 ℃ in the EPS panel. The inside/outside shape changes were limited by the height of the low and middle positions until the critical point of a 25 cm separation distance. Furthermore, the combustion marks appeared after 500 s on average, and then the EPS panel with a high fire strength showed a broad "U type" pattern, glass wool panel, and gypsum board panel showed medium or narrow "V type" pattern. Therefore, the acquired data can provide valuable information for evaluating the fire risks and verifying fire investigation from buildings composed of these insulation panels.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.57-60
• /
• 2011

EPS패널의 열방출율과 가스유해성에 대한 연구는 꾸준히 진행되어왔다. 그러나 그 동안의 시험 결과는 KSF ISO 5660-1(콘칼로리미터) 시험규정에 의한 소형시편을 이용한 것으로 난연제의 과다투입 또는 심재의 변형이 쉬워 결과를 신뢰하기 힘들고 실제 생산되는 크기의 샌드위치패널의 난연성능을 판단하기 힘들다. 따라서, 보다 정확한 실물화재시험의 필요성이 요구되고 있다. 난연 EPS샌드위치패널과 일반EPS샌드위치패널의 실물화재 실험결과 난연EPS샌드위치패널은 기타재료의 샌드위치패널과 열방출율, 연기발생율, 부분별 온도분포, 플래시오버등과 같은 난연성능이 EPS샌드위치패널과 우레탄폼패널보다 우수하며, 글라스울과 비슷한 성능을 나태내는 것을 확인 할 수 있다. 그래서 시공성, 경제성 등의 EPS샌드위치패널의 장점을 그대로 유지하며 난연제의 코팅법을 통해 우수한 난연성능을 확보하였다.