• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2010.05a
• /
• pp.219-222
• /
• 2010

여수 연안 소형 정치망 2곳에 있어서 혼획과 투기에 대하여 2007년부터 2010년까지 26회의 조사를 실시하였다. 매년의 조업 일수는 어황이나 해황에 따라 변동이 심했으며, 최근에는 여름과 가을철에 해파리 때문에 조업을 포기하므로서 조업일수가 많지는 않았다. 어획된 전체 어종수는49종이었고, 어획후 전량투기되는 어종수는 7종(2007년)으로 나타났다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.8
• /
• pp.1266-1275
• /
• 2000

This study was to research the actual condition of a dropworts working environment and to develope the clothing to reduce the work road. The actual conditions of working environment, working position and clothing were surveyed. Experiments were performed in the chamber and in the field. In the chamber, rectal temperature, 11 points skin temperatures(forehead, chest, abdomen, upperarm, forearm, dorsum manus, palm, thigh, calf, dorsum pedis and pelma), heart rates, microclimates inside clothing on the chest and subjective sensations were measured for comparing between 2 different types o garments. In the field, rectal temperature, abodomen skin temperature, 3 points microclimates inside clothing(chest, back and thigh), heart rates, the volume of EMG and subjective sensations were measured. The results were as follows; 1. There were no significant differences in rectal temperature between a old type protective clothing and a new type both in the chamber and the field. 2. Subjects wearing a old type clothing responded \"a little cold\", \"a little uncomfortable\" and subjects wearing a new type protective clothing responded \"normal\", \"comfortable\" both in the chamber and the field. 3. In the field test results, abodemen skin temperature in a old type clothing was higher and microtemperatures inside clothing of chest, back and thigh in a new type protective clothing were higher. 4. The volume of EMG was lower in the new type protective clothing than in the old one.protective clothing than in the old one.

• Korean Journal of Food Science and Technology
• /
• v.4 no.2
• /
• pp.100-105
• /
• 1972

This experiment was conducted to investigate the combined effects of radiation and antiseptics on the keeping qualities of pork sausage, which was treated with potassium sorbate and AF-2(2-(-2-furyl)-3-(5-nitro-2-furyl)-acrylamide), and then followed by gamma radiation of 0.25, 0.5, and 0.75 Mrad. Amounts of treated antiseptics were a quarter, half, and full levels of their maximum permissible concentration. Irradiated and unirradiated sausages were stored for 50 days at $5^{\circ}C\;and\;25^{\circ}C$, and their changes in rancidity, volatile basic nitrogen, bacterial counts, pH, and sensory analysis were examined during the storage period. The results obtained are as follows: 1) Preservative effects of antiseptics were manifested at cold storage; antiseptics treatment of a quarter-level and unirradiation following low-temperature storage showed the same good keeping qualities as the combined treatment of full-level antiseptics and radiation of 0.25 Mrad following high-temperature storage. 2) There did not appear to recognize irradiation-odor, while color and odor were deteriorated intensively by storage temperature. Sausage irradiated with 0.75 Mrad has shown slightly noticeable off-odor at the end of storage at $25^{\circ}C$. 3) The most suitable radiation dose was considered to be 0.5 Mrad, which could extend the storage life about $2{\sim}3$ times longer than untreated.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.426-428
• /
• 2001

현재 국내에서 사용되고 있는 신호등용 전구는 전량 해외에서 수입되는 백열전구로써, 낮은 발광효율($8.0{\sim}8.4lm/W$)과 짧은 수명(약 4,000 hours)으로, 지방 자치단체의 경우 전기에너지의 과소비와 과중한 전력요금 부담 잦은 유지보수로 관리비용이 증가하고 교통환경을 악화시키는 원인이 되고 있으며, 국가적으로는 첨두부하 증가, 귀중한 에너지 낭비 및 석유, 가스 등 발전용 화석연료 사용증가에 따른 환경오염을 유발하고 있다. LED(Light Emitting Diode. 발광다이오드)는 발광 특성상 열 발생이 적고, 특정 파장대의 단색광을 발광하는 광원으로써 전력소비가 매우 작고, 긴 수명, 양호한 환경 특성을 가지고 있다. 옥외에 노출되고, 점등이 길고 소등 횟수가 많으며 단색광을 필요로 하는 신호등에 적합한 것으로 평가되고 있다. 그러나 LED 신호등은 발광 원리 및 발광 방식이 기존의 전구식과 달라 현재 규정된 시험방법으로 직접 평가가 불가능하다. 따라서 우리나라의 경우 LED 제조기술은 세계적인 수준이나 LED 신호등에 대한 기술개발 및 보급은 현실적으로 어려운 실정이다. 본 논문에서는 국내 보급환경 구축을 위해 LED 신호등에 대한 시제품의 특성을 장시간의 옥외 시험을 통해 우리나라 환경 특성에 적합한 LED 교통 신호등 규격을 연구하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3151-3153
• /
• 2000

현재 국내에서 사용되는 교통신호등용 전구는 전량 해외에서 수입하는 백열전구로써 발열에 의한 낮은 발광 효율과 짧은 수명으로. 전력의 과소비와 과중한 전력요금 부담. 잦은 유지보수로 관리비용의 증가와 교통환경 악화의 원인이 되고 있으며, 국가적으로는 귀중한 에너지의 낭비, 첨두부하 증가에 따른 전력수요관리의 어려움, 발전용 화석연료 사용증가에 따른 환경오염 유발 등의 문제가 발생하고 있다. 그러나 $8{\sim}12$인치의 원형(또는 사각) PCB 기판에 수백개의 고휘도 LED(반도체 발광 다이오드, Light Emitting Diode)와 구동회로로 구성되는 LED 교통신호등은 발열에 의한 열손실이 거의 없고, 특정 파장대의 단색광을 발광하여 착색렌즈 사용에 따른 빛손실이 없어 80% 이상의 대폭적인 에너지 절약이 가능하며. 또한 긴 수명으로 유지보수비용의 절감 및 교통환경개선 효과가 크게 기대되어 미국, 일본 등 고휘도 LEB 기술 선진국을 중심으로 경쟁적으로 LED 신호등 기술개발에 심혈을 기울이고 있으며, 일부 시범 보급중에 있다. 교통신호등은 특성상 국민의 안전과 직결된 사안으로 엄격한 규격으로 제한하고 있다. 그러나 LED 신호등은 발광 원리 및 발광 방식이 기존의 전구식과 달라 현재 규정된 시험방법으로 직접 평가가 불가능하다. 따라서 우리나라의 경우 LED 제조 기술은 세계적인 수준이나 LED 신호등에 대한 기술개발 및 보급은 현실적으로 어려운 실정이다. 본 논문에서는 에너지절약형 우리나라 환경 특성에 적합한 LED 교통 신호등의 규격 제정 및 국내 보급환경 구축을 위해 LED 신호등에 대한 시제품의 특성을 장시간의 옥외 시험을 통해 평가하고자 한다.

• Clean Technology
• /
• v.26 no.3
• /
• pp.177-185
• /
• 2020

All coal ash, generated from coal-fired power plants, is entirely dumped onto a landfill site. As coal ash contains 80% fly ash, a clean floating process was developed in this study to recover useful components from coal ash and to use them as high value-added industrial materials. When the unburned carbon (UC) was recovered from the fly ash, soybean oil, an eco-friendly vegetable oil, was used as collector instead of a non-ionic kerosene collector to prevent the occurrence of odor from the kerosene. After the UC was separated by flotation, particulate ceramic microsphere (CM) was recovered, without generating acidic wastewater, through hydro-cyclone instead of sulfuric acid solution in order to separate ceramic microsphere (CM) and cleaned ash (CA) from the residue. By utilizing soybean oil as a collector, the recovery rate of UC turned high at 85.8% due to the increased adsorption of UC, the high viscosity of soybean oil, and the increase in floating properties caused by the linoleic acid contained in soybean oil. All of the combustible components contained in the recovered UC were carbon components, with the carbon content registering high when soybean oil was used. The recovered UC had many pores with a rough surface; thus, it could be easily ground and then used as an industrial material for its fine particles. The CM and CA recovered by the clean separation process using hydro-cyclone had a spherical shape, and the particles were clearly separated without clumping together. The average diameter (D₅₀) of the particles was 5 ㎛, so it was possible to realize the atomization of CM through a process change.

• Clean Technology
• /
• v.25 no.3
• /
• pp.179-188
• /
• 2019

Upon the combustion of coal particles in a coal-fired power plant, fly ash (80%) and bottom ash (20%) are unavoidably produced. Most of the ashes are, however, just dumped onto a landfill site. When the landfill site that takes the fly ash and bottom ash is saturated, further operation of the coal-fired power plant might be discontinued unless a new alternative landfill site is prepared. In this study, wet flotation separation system (floating process) was employed in order to recover unburned carbon (UC), ceramic microsphere (CM) and cleaned ash (CA), all of which serving as useful components within fly ash. The average recovered fractions of UC, CM, and CA from fly ash were 92.10, 75.75, and 69.71, respectively, while the recovered fractions of UC were higher than those of CM and CA by 16% and 22%, respectively. The combustible component (CC) within the recovered UC possessed a weight percentage as high as 52.54wt%, whereas the burning heat of UC was estimated to be $4,232kcal\;kg^{-1}$. As more carbon-containing UC is recovered from fly ash, UC is expected to be used successfully as an industrial fuel. Owing to the effects of pH, more efficient chemical separations of CM and CA, rather than UC, were obtained. The average $SiO_2$ contents within the separated CM and CA had a value of 53.55wt% and 78.66wt%, respectively, which is indicative of their plausible future application as industrial materials in many fields.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.59-67
• /
• 2016

In landscape design by public institutions, although the costs and species of landscape trees stipulated by the Korean Public Procurement Service(PPS) are generally adhered to, the PPS regulations about planting trees with well-developed rootlets are almost entirely neglected. This study aimed to evaluate the performance of buried container modules, which are a new technology and product in landscape production that is able to reduce the defect rate while complying with regulations. To this end, this study measured rootlet density, rootlet development length, rootlet survival rate on excavation, and impairments of tree growth for 3 months after root pruning, and compared these variables for the container modules with those for trees that underwent root pruning in bare ground, and those that were cultivated in a container above ground. The results were as follows: First, the rootlet density was 88% for the trees in container modules, which was very high. Trees that underwent standard root pruning in bare ground had a somewhat lower density of 64%. Meanwhile, the trees that were cultivated in pots above ground died, invalidating measurement. Second, in terms of rootlet development and rootlet survival rate, the trees in container modules showed a mean length of 10.4cm, and 100% survival rate, indicating that there was no rootlet damage caused by excavation. For the trees that only underwent root pruning in bare ground, the mean length was 25.6cm and the rootlet survival rate was only half that of the trees in container modules, at 56%, demonstrating considerable damage. Rootlet development did not occur at all in the trees grown in pots. Third, the trees in container modules and those that underwent root pruning in bare ground did not show any deaths during the root pruning process, or any impairments such as stunted leaf growth. Conversely, the trees grown in pots nearly all died, and severe impairments of tree growth were observed. As shown by the results above, when we evaluated the performance of buried container modules, they showed the most outstanding performance of the three models tested in this study. The container modules prevent defects by stimulating early rooting in environments that with poor conditions for growth, or in trees that are not suited to the summer environment Therefore, it is expected that they would be an optimal means by which to enable compliance with rules such as the regulation presented by the PPS.

• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.397-408
• /
• 2003

This study was conducted to examine the feeding effects of FFWBG (fermented feedstuff with wet brewer’s grain) and GS(grinding soybean) in Hanwoo steers. For this research, total twenty steers(average body weight : 455.7$\pm$25.9kg) were grouped into control(formula feed), T1(formula feed:FFWBG=60:40), T2(formula feed:GS=80:20), T3(formula feed:FFWBG:GS=50:40:10), and T4(formula feed: FFWBG:GS=40:40:20), each treatment was allocated to four steers. There was a tendency to be increased average daily gain in T1, T2, T3 and T4 compared with the control even though no statistical significance was found. The feed conversion of T1, T2, T3 and T4 were beneficially better than that of control(P<0.05; 8.25, 9.44, 6.69 and 7.71 vs 11.90, respectively). The blood urea nitrogen concentration of T4 was higher than that of control(P<0.05), but the creatinine concentration of T4 was lower than that of control(P<0.05). The glucose concentration of T1, T2, T3 and T4 were higher than that of control(P<0.05; 59.39, 62.44, 62.17 and 54.00 vs 51.00mg/$d\ell$, respectively). The back-fat thickness of T3 was thicker than that of control, T1, T2 and T4. The rib-eye area of T1, T3 and T4 was wider than that of control. Appearances percentage of ‘A’ ranked meat quantity were 66, 33, 75 and 33% in control, T1, T2 and T4, respectively.

• Korean Journal of Ichthyology
• /
• v.31 no.1
• /
• pp.7-15
• /
• 2019

The present study aimed to investigate the influence of starvation on growth, survival and swimming ability of Pacific cod Gadus macrocephalus larvae. Notochord length, musculature height, body depth, gut height and volume of yolk of reared larvae were measured to determine the growth parameters. A significant difference was observed in all morphometric characteristics before 15 DAH (days after hatching). Body depth and volume of yolk of unfed larvae were significantly smaller than those of fed larvae from 9 DAH (P<0.05). Almost all yolk in fed group was consumed at 11 DAH. Survival and growth of larvae were observed to determine the effect of delayed initial feeding (2 DAH, 3 DAH, 4 DAH, unfed). All larvae in the unfed group died by 15 DAH and the larvae in other experimental groups survived until the end of the experiment to 21 DAH. Survival rate was not significantly different between the 2 DAH group ($17.5{\pm}4.27%$) and the 3 DAH group ($20.5{\pm}1.5%$) at 21 DAH (P>0.05). However, there was a significant difference in survival rate between the 3 DAH group and the 4 DAH group ($11.7{\pm}1.52%$) (P<0.05). There was no significant difference in notochord length among the groups fed from 2 DAH, 3 DAH and 4 DAH at 21 DAH (P>0.05). The swimming ability in fed group gradually increased in both cruising and burst swimming speeds, while those abilities in unfed group gradually decreased after reaching the peak at 6 DAH in both cruise ($18.7{\pm}6.56mm/s$) and burst swimming speed ($43.5{\pm}12.65mm/s$).