• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.102-113
• /
• 2017

A new index for the buckling strength of non-structured plates is proposed. The external work or the deformation energy caused by the external loads or the boundary displacement controled by a load parameter is calculated along an equilibrium path of the member under consideration. If the second variation of the energy with respect to the parameter loses its positiveness, it defined as the limit of the stability. In contrast to the current method given in codes where the stability limit is evaluated by using only representative internal forces, the evaluation of the stability limit is always consistent even with the change of the distribution of the internal forces on the boundary. If the elasticity is concerned, the result from this proposed approach becomes identical to that from the classical methods.

• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.555-564
• /
• 2007

Discrete cosine transform (DCT) coefficient dropping is well recognized as an efficient rate adaptation transcoding in motion-compensated (MC)-DCT based MPEG-compressed videos. However, in this scheme, the errors incurred by the DCT coefficient-dropping are propagated and often result in significant visual quality degradation. This paper presents two propositions describing well the statistical properties of propagated errors. That is, we propose that the DCT error of the current frame is not correlated to the propagated errors of the previous frames. We also propose that the overall distortions in a given frame can be approximated as the sum of the DCT error of the current frame and the propagated errors from the previous frames. Then, it is shown that several computer simulations with different video sequences verify the effectiveness of the proposed statistical analyses.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.9
• /
• pp.445-456
• /
• 2005

We propose a fast and accurate fluid solver of the Wavier-Stokes equations for the physics-based fluid simulations. Our method utilizes the solution of the Stokes equation as an initial guess for the velocity of the nonlinear term in the Wavier-Stokes equations. By guessing the initial velocity close to the exact solution of the given nonlinear differential equations, we can develop remarkably accurate and stable fluid solver. Our solver is based on the implicit scheme of finite difference methods, that makes it work well for large time steps. Since we employ the ADI method, our solver is also fast and has a uniform computation time. The experimental results show that our solver is excellent for fluids with high Reynolds numbers such as smoke and clouds.

• Journal of the Korea Convergence Society
• /
• v.12 no.11
• /
• pp.91-97
• /
• 2021

This paper uses a data extension technique originally designed for the rule refinement problem to handling incomplete data. This technique is characterized in that each event can have a weight indicating importance, and each variable can be expressed as a probability value. Since the key problem in this paper is to find the probability that is closest to the missing value and replace the missing value with the probability, three different algorithms are used to find the probability for the missing value and then store it in this data structure format. And, after learning to classify each information area with the SVM classification algorithm for evaluation of each probability structure, it compares with the original information and measures how much they match each other. The three algorithms for the imputation probability of the missing value use the same data structure, but have different characteristics in the approach method, so it is expected that it can be used for various purposes depending on the application field.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.4
• /
• pp.383-391
• /
• 2009

In speech signal processing, speech signal corrupted by noise should be enhanced to improve quality. Usually noise estimation methods need flexibility for variable environment. Noise profile is renewed on silence region to avoid effects of speech properties. So we have to preprocess finding voice region before noise estimation. However, if received signal does not have silence region, we cannot apply that method. In this paper, we proposed SNR estimation method for continuous speech signal. The waveform which is stationary region of voiced speech is very correlated by pitch period. So we can estimate the SNR by correlation of near waveform after dividing a frame for each pitch. For unvoiced speech signal, vocal track characteristic is reflected by noise, so we can estimate SNR by using spectral distance between spectrum of received signal and estimated vocal track. Lastly, energy of speech signal is mostly distributed on voiced region, so we can estimate SNR by the ratio of voiced region energy to unvoiced.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.16-16
• /
• 2000

충격파를 포함하는 초음속 유동을 해석하는 수치해법 중에서 많이 사용되어진 것은 엄밀 및 근사 리만 해법과 플럭스 분할 기법들로서 이들은 Euler 방정식에 기반을 두고 선형 또는 비선형파의 상호작용을 풍상 차분법으로 기술하는 방법들이다. 이러한 수치기법들은 과거 광범위하게 사용되어 왔으나 최근 여러 가지 단점이 발견되었다. 이와 같은 문제점을 극복하고자 입자의 통계적인 운동을 기술하는 기체 운동론에 근거하여 BGK 수치기법이 제시되었다. 이는 비충돌 볼츠만 방정식으로부터 입자의 수준에서 플럭스 분할 기법 형태의 풍상차분법을 구현하는 것으로 볼츠만 방정식의 충돌항을 BGK 모델로 대치하고 이것의 적분해로부터 수치 플럭스를 구한다. 이 수치기법은 기존의 리만해법에 비하여 수치적으로나 물리적으로 매우 타당한 성질인 강건성, 정확성, 엔트로피 조건, 양수보존성 등을 가지고 있음이 밝혀졌다. 이와 같은 수치기법을 사용하여 로켓 노즐 내의 아음속, 천이음속, 초음속에서의 유동장 해석을 위한 프로그램을 작성하였다. 시간 적분에 대하여는 정상 상태의 계산을 위하여 내재적 시간 적분 방법을 사용하였으며, 공간 이산화 방법으로는 임의의 제어체적에 대하여 적분형 보존 방정식을 적용하는 유한 체적법을 사용하였다. 초음속 입구 유동과 출구에서 초음속과 저음속 유동의 두가지 경우를 고려하여 얻은 결과를 기존의 연구 결과와 비교하여 본 결과 잘 일치하였다. 입구 유동이 저음속이고 출구 유동이 초음속인 경우에 대하여도 해석결과가 실험결과와 잘 일치하였다. 상대적으로 낮은 온도, 압력 조건과 높은 온도, 압력 조건을 가지는 고체 로켓 모터 노즐 내의 유동을 해석하였다. 이들 해석 결과를 전압, 전온도로 표준화시킨 결과 서로 일치하였으며, 파라서 저온, 저압에서 얻은 결과도 표준화시킬 경우, 고온, 고압에서도 사용될 수 있음을 알 수 있었다.의 영향에 초점을 맞추었다.다고 판단되며 배기 가스 자체에 대기 공기중에 함유되어 있던 습기가 얼어붙는(Icing화) 문제가 발생하기 때문에 배기가스의 Icing을 방지하기 위하여 압축기 끝단에서 공기를 추출하여 배기부분에 송출할 필요성이 있는 것으로 판단되었다. 출구가스의 기체 유동속도가 매우 빠르므로 (100-l10m.sec) 이를 완화하기 위한 디퓨저의 설계가 요구된다고 판단된다. 또 연소기 후방에 물을 주입하는 경우 열교환기 및 기타 부분품에 발생할 수 있는 부식 및 열교환 효율 저하도 간과할 수 없는 문제로 파악되었다. 이러한 기술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.9%), 종격동기흉과 폐염이 병발한 경우와 폐염이 각 1례(2.9%)였다. 14) 식도경 시행회수는 1회가 17례(54.8%), 2회가 9례(29.0%), 3회 이상이 5례(16.1%)였다.EX>$IC_{50}$/ 값이 210 $\mu\textrm{g}$<

• Journal of Korea Water Resources Association
• /
• v.44 no.7
• /
• pp.511-522
• /
• 2011

Two-dimensional shallow water model based on the cut cell and the adaptive mesh refinement techniques is presented in this paper. These two mesh generation methods are combined to facilitate modeling of complex geometries. By using dynamically adaptive mesh, the model can achieve high resolution efficiently at the interface where flow changes rapidly. The HLLC Reimann solver and the MUSCL method are employed to calculate advection fluxes with numerical stability and precision. The model was applied to simulate the extreme urban flooding experiments performed by the IMPACT (Investigation of Extreme Flood Processes and Uncertainty) project. Simulation results were in good agreement with observed data, and transient flows as well as the impact of building structures on flood waves were calculated with accuracy. The cut cell method eased the model sensitivity to refinement. It can be concluded that the model is applicable to the urban flood simulation in case the effects of sewer and stormwater drainage system on flooding are relatively small like the dam brake.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.7
• /
• pp.455-463
• /
• 2001

In this Paper, an approximate processing method is proposed and tested. The proposed method uses variable CSD (VCSD) coefficients which approximate filter stopband attenuation by controlling the precision of the CSD coefficient sets. A decimation filter for Audio Codec '97 specifications has been designed having processor architecture that consists of program/data memory, arithmetic unit, energy/level decision, and sinc filter blocks, and fabricated with 0.6${\mu}{\textrm}{m}$ CMOS sea-of-gate technology. For the combined two halfband FIR filters in decimation filter, the number of addition operations were reduced to 63.5%, 35.7%, and 13.9%, compared to worst-case which is not an adaptive one. Experimental results show that the total power reduction rate of the filter is varying from 3.8 % to 9.0 % with respect to worst-case. The proposed approximate processing method using variable CSD coefficients is readily applicable to various kinds of filters and suitable, especially, for the speech and audio applications, like oversampling ADCs and DACs, filter banks, voice/audio codecs, etc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.221-231
• /
• 1997

This paper presents an analysis of a hybrid direct-sequence/slow frequency hopped code division multiple access(DS/SFH-CDMA) system employing noncoherent M-ary frequency shift keying(MFSK) modulation in a multiple m-distribution fading environment. Multipath interfer- ence(MPI) and multiuser interference(MUI) is taken into accout and the spectral efficiency is calculated for uncoded as well as simple channel coding systems. The predetection multipath CCI canceller in conjunction with convolution coding is employed for improving the bit error rate(BER) performance. The BER of noncoherent hybrid system is obtained using a Gaussian interference approximation. From the results, we know that the error performance more deteriorates as the depth of fading becomes deeper. The DS part of the modulation combats the multipath interference, whereas the FH part is a predetection against large multiuser interference. It is shown that, for the con- sidered types of a channel coding, the use of a predetection coding is still essential for obtained a satisfactory bit error performance. The results show that the capacity of the DS/SFG-CDMA MFSK communication system increases in proportion to the length of PN code sequence in the presence of AWGN and MUI. In m-distribution fading environment the capacity increases in proportion to the fading index. The capacity is increased and error performance is improved when the CCI Canceller and Convolution code technique are adopted, respectively. From the results, it is known that the error performance of $4\times10^{-2}$ by adopting Canceller technique. Also convolutional coding technique is the improvement of error performance attains about $10^{-5}$ in code rate 1/2.

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.89-99
• /
• 2000

To cope with the limits of conventional O-D trip matrix collecting methods, several approaches have been developed. One of them is bilevel Programming method Proposed by Yang(1995), which uses Sensitivity Analysis Based(SAB) algorithm to solve Generalized Least Square(GLS) problem. However, the SAB a1gorithm has revealed two critical short-comings. The first is that when there exists a significant difference between target O-D matrix and true O-D matrix, SAB algorithm may not produce correct solution. This stems from the heavy dependance on the historical O-D information, in special when gravel Patterns are dramatically changed. The second is the assumption of iterative linear approximation to original Problem. Because of the approximation, SAB algorithm has difficulty in converging to Perfect Stackelberg game condition. So as to avoid the Problems. we need a more robust and stable solution method. The main purpose of this Paper is to show the problem of the dependency of Previous models and to Propose an alternative solution method to handle it. The Problem of O-D matrix estimation is intrinsically nonlinear and nonconvex. thus it has multiple solutions. Therefore it is necessary to require a method for searching globa1 solution. In this paper, we develop a solution algorithm combined with genetic algorithm(GA) , which is widely used as probabilistic global searching method To compare the efficiency of the algorithm, SAB algorithm suggested by Yang et al. (1992,1995) is used. From the results of numerical example, the Proposed algorithm is superior to SAB algorithm irrespective of travel patterns.