• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.2
• /
• pp.127-135
• /
• 1983

A new approach is developed to analyze the reliability of the earth retaining wall using the concept of probability of failure, instead of conventional factor of safety. Many uncertainties, which are included in the conventional stability analysis, can be excluded by using the stochastic approach. And the reliability, more consistent with the reality, can be obtained by the simulation. The strength parameters of soil properties are assumed to be random variables to follow a generalized beta distribution. The interval [A, B] of the random variables could be determined using the maximum likelihood estimation. The pseudo-random values corresponding to the proposed beta distribution are generated using the rejection method. The probability of failure defined as follows, is obtained by using the Monte Carlo Method. $$P_f=\frac{M}{N}$$ where, $P_f$ : Probability of failure N : Total number of trials M : Total number of failure out of N A computer program is developed for the computation procedure mentioned above. Finally, a numerical example is solved using the developed program.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1589-1596
• /
• 2013

Recently, spectral efficiency or reliability is required to be improved in the scenario of multiple access. In this paper, we consider a scenario where two source nodes access one destination node. Different with conventional multiple access studies, in our research, a part of the allocated resource is shared by two source nodes and this scheme is called partial multiplexing. Let $R_s$ denote the ratio of the amount of the shared resource to that of the resource allocated to each user. We analyze and optimize the performance of the partial multiplexing in term of $R_s$. We show that the optimal $R_s$ to maximize the throughput is 1 or 0 based on approximated bit error rate (BER). In addition, if we set a constraint on frame error rate (FER), $R_s$ can have a value between 0 and 1. We also find the approximated $R_s$ to meet the constraint as a closed form. Partial multiplexing can be a novel multiple access scheme.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1709-1718
• /
• 2021

The waveform data of the Airborne Bathymetric LiDAR (ABL; LiDAR: Light Detection And Ranging) system provides data with improved accuracy, resolution, and reliability compared to the discrete-return data, and increases the user's control over data processing. Furthermore, we are able to extract additional information about the return signal. Waveform decomposition is a technique that separates each echo from the received waveform with a mixture of water surface and seabed reflections, waterbody backscattering, and various noises. In this study, a new waveform decomposition technique based on a Gaussian model was developed to improve the point extraction performance from the ABL waveform data. In the existing waveform decomposition techniques, the number of decomposed echoes and decomposition performance depend on the peak detection results because they use waveform peaks as initial values. However, in the study, we improved the approximation accuracy of the decomposition model by adding the estimated potential peak candidates to the initial peaks. As a result of an experiment using waveform data obtained from the East Coast from the Seahawk system, the precision of the decomposition model was improved by about 37% based on evaluating RMSE compared to the Gaussian decomposition method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.1
• /
• pp.93-101
• /
• 1984

New formulas to determine the critical elastic buckling load of long tapered columns are given. This study is restricted to solid round or rectangular columns with fixed-free ends as often used in highway design. The exact solution of the differential equation of the deflection curve is expressed in terms of Bessel Function and the solution is numerically evaluated using Bisection method by computer. In the F.E.M analysis of columns under their own weight, the stability problem can be resulted in a eigen value problem of conservative system. Approximate solution by the F.E.M is evaluted numerically using Jacobi method and compared with exact solution of the prismatic column to increase the precision. In addition, critical buckling load of the tapered column for every shape factor and ratio of cross-sectional change (Diameter of bottom end/Diameter of upper end) was converted into a comparable expression to critical buckling load of the prismatic column.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.461-466
• /
• 2013

Advanced fiber-reinforced laminated composites are widely used in various fields of engineering to reduce weight. The material property of each ply is well known; specifically, it is known that ply is less reliable than metallic materials and very sensitive to the loading direction. Therefore, it is important to consider this uncertainty in the design of laminated composites. In this study, reliability analysis is conducted using COMSOL and MATLAB interactions for a laminated composite plate for the case in which the tip deflection is the design requirement and the material property is a random variable. Furthermore, the efficiency and accuracy of the approximation method is identified, and a probabilistic sensitivity analysis is conducted. As a result, we can prove the applicability of the advanced design method for the stabilizer of an underwater vehicle.

• The Journal of Engineering Geology
• /
• v.29 no.4
• /
• pp.417-425
• /
• 2019

Agricultural groundwater use accounts for 51.8% of total groundwater use, so accurate estimation of groundwater use is important for efficient groundwater management. The purpose of this study is to develop a method for estimating the groundwater use of agricultural (rice farming and dry-field farming) wells using regression tree model based on the measured data of 370 wells. Three input variables of the model were evaluated as being significant: well depth, pipe diameter, and pump capacity, and the importance of each variable was 75% for well depth, 17% for pipe diameter, and 8% for pumping capacity. The daily usage of agricultural (rice farming and dry-field farming) wells by the regression tree model was estimated to be very similar to the actual usage, compared to the previous estimation method proposed by the Ministry of Construction and Transportation. In the future, it is expected that the reliability of the usage statistics will be improved if additional observed data is secured and this classification method is modified.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.411-421
• /
• 2002

The accurate analysis of ultrasonic wave propagation and scattering plays an important role in many aspects of nondestructive evaluation. A numerical analysis makes it possible to perform parametric studies, and in this way the probability of detection and reliability of test results can be improved. In this study, a finite element method was developed for the analysis of ultrasonic fields, the accuracy of results was checked by solving several representative problems. The size of element and the integral time step, which are the critical components for the convergence of numerical results, were determined in a commercial finite element code. Several propagation and scattering problems in 2-D isotropic and anisotropic materials were solved and their results were compared with known analytical or experimental results.

• Journal of Korea Water Resources Association
• /
• v.42 no.4
• /
• pp.297-307
• /
• 2009

For reliable water quality simulation by semi distributed model, accurate daily runoff simulation should have preceded. In this study, newly developed channel routing method which is nonlinear storage method is combination of Muskingum routing method and variable storage routing method and temporally weighted average curve number method were applied for effect analysis of water quality simulation. Developed modules, which are added in SWAT models and simulation, were conducted for the Chungju dam watershed. The simulation result by each module applied effect. As a result of analysis contribute water quality modeling, nonlinear storage method is more effective than temporally weighted average curve number method. Nutrient loading discharge was affected by development of runoff delaying from improvement of channel routing, because of characteristics of nonpoint source pollution.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.65-67
• /
• 2018

We introduce a system that detects smoking in a specific area. The proposed system is implemented on a wireless ad hoc network consisting of Raspberry Pi boards. It is more economical owing to low-cost device than commercial smoking monitoring system and is scalable than the existing system with single Raspberry Pi. In this paper, the probability density function of carbon monoxide concentration during smoking and non-smoking is approximated as Gauusian distribution, respectively, using data measured from sensors for a long time. Based on this, a maximum likelihood detection technique is adopted to estimate the smoking status by observing the concentration of carbon monoxide. We aim at improving the reliability by estimating the smoking status using the collected values from multiple sensors connected to the ad hoc network.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.59-67
• /
• 2003

In this study, the change in hydraulic conductivity according to the changes in the contact area, aperture, confining pressure and temperature was observed to improve the reliability of the analysis of underground water flow. Also, the mechanical and thermal properties of domestic crystalline rocks in a great depth were obtained. It was found that the averaged intial aperture ranged from 544.33${\mu}{\textrm}{m}$ to 898.62${\mu}{\textrm}{m}$ and it followed a log-normal distribution. The hydraulic conductivity decreased with the increase of normal stress on the fracture surface and the hydraulic conductivity decreased as temperature increased. The change in hydraulic conductivity was strongly correlated with the change in contact area. It was verified by experiments that hydraulic conductivity was inversely proportional to the contact area. The measured mechanical and thermal properties were very close to the existing typical properties of domestic granites.