• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.776-779
• /
• 2005

Liquefied Natural Gas takes up six hundredths of the volume of natural gas, which makes storage and transportation much easier. To send out natural gas via a pipeline network across the nation, high pressure LNG pumps supply highly compressed LNG to high-pressure vaporization facilities. The Number of high Pressure LNG pumps determined the send out amount in LNG receiving terminal. So it is main equipment at LNG production process and should be maintained on best conditions. In this paper, to find out the cause of high beat vibration at cryogenic pumps, vibration and motor current analysis have been performed. And high beat vibration of cryogenic pumps could be reduced due to the modification of motor rotor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.438-446
• /
• 2005

In this paper, the modified generalized Chebyshev rational function is presented. The new element values of prototype low pass filter are obtained by network synthesis using this rational function. This proposed filter has an equal ripple passband as same as conventional generalized Chebyshev filter, but unlike conventional filter which has only one attenuation pole at finite frequency, the proposed filter has two different from each other attenuation pole in stopband. If the harmonic frequency is set to the second attenuation pole frequency, this harmonic is suppressed efficiently. Furthermore, since the location of the second attenuation pole can be arbitrary adjusted. our filters are very available for the realization of wide stopband, particularly.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.247-250
• /
• 2003

디지털 2차 적응 IIR 대역 통과 필터의 진폭 특성을 해석, 적응 계수와 입력 신호의 중심 주파수 그리고 극의 각과의 관계를 해석하고, 적응 계수의 경계를, 기존에 발표된 세 알고리즘을 예로 들어, 평가하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.924-930
• /
• 2003

In this paper, a novel miniaturized microstrip duplexer with attenuation pole is proposed. A three-pole microstrip CT(Cascade Trisection) two bandpass filters have each asymmetrically prescribed transmission zero are design and fabrication. This CT bandpass filter changes coupling structure, which not only shifts the location of attenuation poles but also improves skirt characteristics. The duplexer results of measurement with the cross coupling CT bandpass filters has been yielded better isolation and sharper skirt behavior than that with a conventional bandpass filter. The results of measurement are almost similar to those of simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.107-113
• /
• 2008

This paper presents half wavelength partial H-plane filters with multiple attenuation poles using narrow H-plane slot of evanescent waveguide. The narrow H-plane slot operates as an admittance inverter o( the bandpass filter and, simultaneously, generates an attenuation pole at particular frequency. Therefore, proposed filters with attenuation poles are simply implemented without any additional coupling and extra modification of the structure. The number of attenuation poles of the filters equals to that of the H-plane slots. Moreover, proposed filters are compact waveguide filter since ones are embodied by partial H-plane waveguide which has 1/4 cross section of conventional waveguide. The third and fourth-order half wavelength filters having 4 and 5 attenuation poles, respectively, are designed in H-band and their frequency responses are confirmed by simulation and measurement.

• Journal of Power System Engineering
• /
• v.9 no.2
• /
• pp.45-49
• /
• 2005

Liquefied natural gas takes up six hundredths of the volume of natural gas, which makes storage and transportation much easier. To send out natural gas via a pipeline network across the nation, high-pressure LNG pumps supply highly compressed LNG to high-pressure vaporization facilities. The Number of high-pressure LNG pumps determined the send-out amount in LNG receiving terminal. So it is main equipment at LNG production process and should be maintained on best conditions. In this paper, to find out the cause of high beat vibration at cryogenic pumps, vibration and motor current signal analysis have been performed. High vibration of cryogenic pumps could be reduced due to the modification of motor rotor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1313-1321
• /
• 2000

This paper presents a novel HTS microstrip pseudo-lumped element resonator for the compact and simple filter design. A 7-pole bandpass filter with quasi-elliptic response is designed and fabricated using non-adjacent couplings between resonators. A seven-pole quasi-elliptic filter is fabricated using double sided YBCO on a LaAlO$_3$ substrate with thickness of 0.5 mm and dielectric constant of 23.5. The filter has an insertion loss of 0.8 dB at 20K, a bandwidth of 8 MHz at the center frequency of 1774 MHz, and an attenuation of 33 dB for the cut-off-band of 1 MHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.554-559
• /
• 2004

A novel miniaturized 2-pole band pass filter(BPF) is proposed and it has an overlapped hairpin and slot structure on the upper and bottom plane of microstrip lines. Due to the overlapped structure of a hairpin and a slot, the size of the proposed BPF is quite smaller than that of a general BPF having coupled lines. The size of the proposed BPF is reduced to 33 % comparing with the conventional λ/4 coupled BPF. The attenuation is improved by controlling the attenuation poles properly using the proposed structure. The proposed 2-pole BPF is fabricated with a narrow bandwidth(69 ㎒) at center frequency, 1.9 ㎓ which is difficult to make that narrow bandwidth in the conventional coupled lines due to impractical spacing. The design method in this paper can be applied to the design of other microwave circuits to reduce the size and improve the performances.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.486-493
• /
• 2010

This article introduces a novel ultra wideband(UWB) bandpass filter(BPF) with sharp roll-off characteristics in stripline structure. The UWB characteristic is basically obtained from capacitive coupled cross resonator. The resonator has ${\lambda}/2$ length. And at the center of the resonator, two stubs are loaded, one is a ${\lambda}/8$ short-circuited stub and the other is a ${\lambda}/8$ open-circuited stub. The two stubs provide two attenuation poles at lower and upper cutoff frequencies. For input and output lines, two identical capacitively coupled lines have been installed to suppress the unwanted signals in the lower and upper stopbands. The filter has been designed for the U.S. UWB band(3.1~10.6 GHz) with two transmission zeros at 2.4 and 11.1 GHz. The filter has been realized with Low Temperature Core-fired Ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results. Insertion loss less than 0.7 dB and return loss better than 14 dB in the pass band have been measured. The group delay in the center frequency is 0.27 ns and the group delay variation within pass band is less than 0.5 ns. The size of the filter is $6{\times}18{\times}0.6\;mm^3$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.739-747
• /
• 2007

Dual-mode bandpass filter was designed by using periodic stepped impedance ring resonator with step perturbation. The periodic stepped impedance ring resonator has the effects of size reduction and $2^{nd}$ harmonic suppression by changing characteristic impedance ratio. The perturbation for dual-mode generation was also easily controlled by characteristic impedance ratio, and the variation of dual-mode resonant frequencies and attenuation pole frequencies were analyzed by the effect of step perturbation. Chip capacitors were used for input/output coupling, and the variation of center frequency by the coupling capacitance and step perturbation was also considered. From the results, two types of 2 GHz dual-mode bandpass filter were fabricated in size of $14{\times}14mm^2$, those have different attenuation poles and bandwidths. The measured results of proposed bandpass filters showed a good agreement with the calculated estimations, and those have insertion loss of 2.52, 0.52 dB and 3 dB bandwidth of 4.03, 15.02 %, respectively.