• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.102-106
• /
• 2008

A new compact UWB bandpass filter with sharp-rejection, low insertion-loss and flat group-delay is developed In this paper, using the transversal filtering combined with SIR(stepped impedance resonator) concept. To form the required passband, multiple out-of-band transmission zeros are created around band-edges, securing very low insertion loss in the very wide frequency range. Also it is found to be beneficial to realize a sharp rejection of higher order with a relatively small overall size and simultaneously have very smoothly varying group-delay which is proper for the UWB applications. The validity of the proposed technique is proven theoretically and experimentally.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.1
• /
• pp.51-56
• /
• 2013

PID control systems are significantly utilized in industrial fields because of its multiple advantages. Many researches about more effective PID controllers to enhance control system performances have been addressed so far. This paper proposes a novel PI-PD control system with a pre-compensator which is configured with a pre-compensator and PD controller in PIcontrol system. The normal method is applied to the proposed control system for obtaining a simple first-order controller from cancelation of poles and zeros. We design a pre-compensator and PD controller by using parameters of PI controller and the transfer function of a plant. Computer simulation is carried out to demonstrate effectiveness of the proposed control system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.318-322
• /
• 1996

This paper presents a technique to control a robot which has a flexible manipulator moving in a vertical plane. The flexible manipulator is modeled as an Euler-Bernoulli beam. Elastic deformation is represented using the assumed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. A control algorithm is developed using a simple PID control technique. The proportional, integral and derivative control gains are determined based on the dominant pole placement method and tuned to show no overshoot and having a short settling time. The effectiveness of the developed control scheme is showed experimentally. In the position control experiment, three different end masses are used. The experimental results shows little overshoot, no steady state error, and less than 2.5 second settling time in case of having an end mass which is equivalent to 45% of the total system weight. Also the residual vibration of the end point is effectively controlled.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.130-136
• /
• 2009

A lumped parameter model of Li-ion battery in hybrid electric vehicle(HEV) is constructed and system parameters are identified by using recursive least square estimation for different C-rates, SOCs and temperatures. The system characteristics of pole and zero in frequency domain are analyzed with the parameters obtained from different conditions. The parameterized model of Li-ion battery indicates highly dependant of temperatures. The system pole and internal resistance changes 6.6 and 18 times at $-20^{\circ}C$, comparing with those at $25^{\circ}C$, respectively. These results will be utilized on constructing model-based state observer or an on-line identification and an adaptation of the model parameters in battery management systems for hybrid electric vehicle applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.4
• /
• pp.322-331
• /
• 1988

In this thesis, an active RC filter using high order inverse chebyshev function is designed and the design method for cascading blocks with low sensitivity and maximum dynamic range is discussed. To have maximum dynamic range, we have proposed the simple algorithm with a pole-zero pairing, the cascading sequence by flatness matrix and optimum gain distribution for a given transfer function. And 2nd order Block is designed with negative feedback to improve the sensitivity problem which had a defect at active RC circuits. Using the suggested method, we have designed the active RC low pass filter of the normalized 7th order inverse chebyshev function, as a results, we have shown that this accord with the given specification.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3
• /
• pp.133-140
• /
• 2005

Crosstalk canceller in stereo channel audio reproduction system has the purpose to deliver desired signals exactly at the listener's ear. Generally. it has a Poor performance in low frequency bands. Frequency-warped Otters are used to provide improved performance in crosstalk canceller for these problems. However. such filters are more complex to implement than conventional filters. This paper presents an efficient method for low-order IIR approximation of frequency warped crosstalk cancellation filters using Pole-zero dewarping. The method preserves the advantages of frequency warping, but has a computational complexity that is similar to the conventional method. This Paper also presents a series of experiments that validate the method of crosstalk canceller.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2481-2493
• /
• 1996

A simple iterative design method is presented for the miniaturized dielectric filter with finite transimmission zeros. Circuit-network transformations are used to place transission zeros in the stop band. This method is simple and quick compared with conventional pole-synthesis methods. the design of the coupling EM patternof the filter needs the much computation time because its design is carried out through the field simulatior. In this paper, an efficient implementation technique of coupling circuit parameters is presented. This technique uses a linear mapping function between the circuit parameter domain and EM parameter domain to save the high computational time of EM simulator. A narrow band asymmetric filter with a transmission zero is designed and fiblicated through these technique in 1900 MHz band.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.203-208
• /
• 2005

In recent years, as the demands of VBNS and VDSL increase, the development of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM elements increases. The alignment and the attachment technology are very important in the fabrication of optical elements. In this paper, the optical alignment characteristics of multi-axis ultra precision stage were studied. The alignment algorithms were studied for applying to the ultra precision multi-axis stage. The alignment algorithm is comprised of field search and peak search algorithms. The contour of optical power signals can be obtained by field search and the precise coordinate can be found out by peak search. Two kinds of alignments, such as 1 ch. input vs. 1 ch. output optical stack, and 1 ch. input vs. 8 ch. output PLC stacks were performed for investigating the alignment characteristics.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.29-35
• /
• 2013

In this paper, we suggest an improved Convex Hull algorithm considering sort in plane point set. This algorithm has low computational complexity since processing data are reduced by characteristic of extreme points. Also it obtains a complete convex set with just one processing using an convex vertex discrimination criterion. Initially it requires sorting of point set. However we can't quickly sort because of its heavy operations. This problem was solved by replacing value and index. We measure the execution time of algorithms by generating a random set of points. The results of the experiment show that it is about 2 times faster than the existing algorithm.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.25-28
• /
• 2002

본 논문은 마이크로 프로세스로 처리되는 여러 제어장치들 중에서 PI제어기의 최적 자동동조에 관한 개선된 방법을 제안하고자 한다. 이 방법은 Relay 자동동조 법으로서 이를 마이크로 프로세스에 응용하여 제어대상에 최적의 PI계수를 입력하게된다. 이를 위해 먼저 Computer와 DSP사이에 통신이 가능하도록 RS-232를 설치하고, 컴퓨터의 제어신호에 따라 모터의 속도가 Relay와 PI제어기에 의해 목표값에 도달할 수 있도록 설계하였다. 내부적으로 사용된 Relay 동조방식은 Relay로 제어대상의 출력을 강제로 진등시켜서 출력의 진폭과 주기를 이용하여 PI 계수를 조정하고 제어기의 입력값으로 선택된다. Relay동조 법은 동조과정이 간단하여 동조 방식의 구현이 쉽다. 또 위상여유를 고려하여 제어기의 계수를 조정하기 때문에 시스템의 견실성을 향상시킬 수 있을 뿐 아니라, 비례 제어만으로 임계 진동을 하지 않는 시스템의 경우에도 사용할 수 있고, 원점에 극점이 있는 경우에도 적용할 수 있어서 기존의 제어방식이 가지는 제약성의 한계를 극복할 수 있어서 적용성이 우수하다.