• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.349-357
• /
• 2022

Drum Set are representative instruments that use grips in modern popular music. Depending on how and how clearly you hold the basic grip, it also affects your performance ability. The purpose of this study is to analyze the characteristics, strengths, and weaknesses of each grip, derive the resulting complex effects, and present practical application plans to the drummers. The research method is largely divided into traditional and matched grips, and in detail, German, American, French, and hybrid styles are included to analyze the performance method utilized. It also refers to the grip method of all drummers from the 1930s to the present, which was registered in Drummer World, an overseas drum site. This study proposed several application plans by classifying and analyzing the most basic grip methods in drum set in detail. I was able to see that the performance impact was different depending on the grip, and I think it will be more helpful for future performances if I understand both the positive and adverse functions of each grip and play it.

• Journal of the Korea Concrete Institute
• /
• v.18 no.3 s.93
• /
• pp.303-312
• /
• 2006

The main objective of this experimental study is to examine the feasibilities of each testing method with various kinds of grip systems for the analysis of tensile strength of GFRP(glass fiber reinforced polymer) reinforcing bars. Three types of grip systems were examined such as resin-sleeved pipe-type grip proposed by CSA(Canadian Standard Association), frictional resistance type metal grip by ASTM(American Standard for Testing and Materials) and wedge-inserted cone-type grip normally used in prestressing tendons. Also, mechanical properties of GFRP rebars with different surface deformations were investigated for each different type of testing grip used in this study. All testing procedures including specimens preparation, set-up of test equipments and measuring devices were made according to the CSA S806-02 recommendations. From the test results, it was found that the highest tensile strengths of GFRP rebars were observed when tested by resin-sleeved grip system regardless of their different surface deformations. But tensile strengths of GFRP rebars by ASTM grip system are only 10% less than those by CSA grip system. On the other hand, CSA grip is not only difficult to prepare but also not disposable. Therefore, ASTM grip system is recommended as a practical alternative to estimate the tensile strength of GFRP rebars.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.38-38
• /
• 2004

본 연구에서는 미세 물체를 조작하기 위해 젓가락 구조론 가진 3 텅스텐 젓가락형 그립퍼(이후 텅스텐 그립퍼로 명명)와 2 하이브리드 젓가락형 그립퍼(이후 하이브리드형 그립퍼로 명명)를 설계하고 제작하여 장단점을 비교 분석한다. 두 가지 그립퍼의 미세 핑거(Micro fingers)들은 모두 압전 다중 벤더(Piezoelectric Multilayer bender)와 스택(Stack) 구동기로 구동되었다. 그 중 압전 다중벤더는 물체를 잡을 때 굽힘(Bending) 운동을 만들고 스택은 팁간의 끝점이 일치하지 않을 매 일치되도록 잡는 방향과 수직한 방향으로 구동된다.(중략)

• Analytical Science and Technology
• /
• v.33 no.6
• /
• pp.240-244
• /
• 2020

A grip impression is evidence of contact between the assailant and victim in a case. The shape of the grip impression can be analyzed to reconstruct which part of the palm it contacted. This study explored whether the grip impression left on cotton, nylon, and polyester fabrics can be identified by vacuum metal deposition (VMD). The latent grip impression developed by VMD had limitations in personal identification, but a new possibility was found that could be used as evidence for crime-scene reconstruction.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.4
• /
• pp.233-241
• /
• 2018

In this paper, we develop a durability test method that can verify the noise caused by the repeated load on the door trim grip handle. The test method was developed in consideration of the load mode and durability test cycle applied to the grip handle. In order to verify the validity of the method, we demonstrated the door trim grip handle noise that occurred in the field claim with the product in the early stage of mass production through the developed test method. Finally, It is used to detect and improve the noise of subsequent development products through the currently developed test method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.30-36
• /
• 2016

Recently, digital doorlock systems have been employing biometric recognition and smartphone as personal authentification means. The performance of a digital doorlock system is determined by the two conflicting indices such as security and convenience. This paper proposes and implements one grip based doorpull shaped doorlock systems using fingerprint and touch sensor grip pattern. The proposed system sequentially performs fingerprint recognition and grip pattern identification when a user grips the doorpull in order to open the door. This method so called 'One Grip' is considered to enhance security while maintaining users' convenience. We expect the proposed method can solve the phone missing problem encountered in developing smart doorlock systems based on smartphones.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.947-953
• /
• 2005

Previous test results showed that the current ASTM(American Standard for Testing and Materials) grip adapter for GFRP(Glass Fiber Reinforced Polymer) rebar was not fully successful in developing the design tensile strength of GFRP rebars with reasonable accuracy. It is because the current ASTM grip adapter which is composed of a pair of rectangular metal blocks of which inner faces are grooved along the longitudinal direction does not take into account the various geometric characteristics of GFRP rebar such as surface treatment, shape of bar cross section as well as physical characteristics such as poisson effect, elastic modulus in the transverse direction and so on. The objective of this paper is to provide how to proportion the optimum diameter of inner groove in ASTM grip adapter to develop design tensile strength of GFRP rebar. The proportioning of inner groove in ASTM grip adapter is based on the force equilibrium of GFRP rebar between tensile capacity and minimum frictional resistance required along the grip adapter. The frictional resistance of grip adapter is calculated based on the compressive strain compatibility in radial direction induced by the difference between diameter of GFRP rebar and inner groove In ASTM grip. All testing procedures were made according to the CSA S806-02 recommendations. From the preliminary test results on round-type GFRP rebars, it was found that maximum tensile loads acquired under the same testing conditions is highly affected by the diameter of inner groove in ASTM grip adapter. The grip adapter with specific dimension proportioned by proposed method recorded the highest tensile strength among them.

• The Journal of Natural Sciences
• /
• v.13 no.1
• /
• pp.25-33
• /
• 2003

Experiment setup was designed to observe the grip pressure and the center of gravity during golf swing. The experimental results of grip pressure and center of gravity during swing showed the constant type in the envelop of force intensity of a stable KPGA pro as a function of time.

• Korea Information Communication Reporters Association
• /
• s.5
• /
• pp.37-37
• /
• 2001

• Korean Architects
• /
• s.496
• /
• pp.12-12
• /
• 2010