• Environmental engineer
• /
• s.328
• /
• pp.23-23
• /
• 2013

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.151-161
• /
• 2016

As part of a policy to address climate change and pollution problem, the government introduced a green credit card scheme in order to motivate pro-environmental behaviors in July 2011. It is important to present the specific ways to facilitate pro-environmental behaviors using the consumer behavior pattern data. This study was a result of data from total fifty seven thousands customer purchasing history data of green credit card to be created for the 3 months from January to March 2015. As the analysis process is put in to operation the analysis of the purchasing customer's profile firstly, and the second come into association analysis to consider the buying associations for green products purchasing networks, the third estimate the useful parameters to affect the customer's pro-environmental behavior and customer characteristics. It shows that royal customers are from 30 to 40 years old and their incomes are from 30 million won to 40 million won. Especially, they live in Daegu, Gyeonggi, and Seoul.

• Bulletin of Korea Environmental Preservation Association
• /
• s.402
• /
• pp.2-5
• /
• 2012

올해 리우에서는 지속가능한 성장을 위해 전 세계가 하루빨리 녹색경제로 이행할 것을 촉구했다. 녹색경제의 혈관은 생산과 유통, 그리고 소비의 선순환 구조다. 우리는 녹색공공구매로 생산과 소비의 혈액 순환을 가져왔고, 그린카드로 소비활동의 새로운 패러다임을 제시했다.

• Bulletin of Korea Environmental Preservation Association
• /
• s.394
• /
• pp.20-24
• /
• 2011

녹색생활 포인트를 지급하는 그린카드 전국 출시 인체에 유해한 어린이용품의 안전관리 강화, 우수환경산업제 지정 지원제도 시행, 사업장폐기물 배출시 전자인계서 작성 의무대상 확대 등 2011년 7월부터 달라지거나 새롭게 시행되는 주요 환경행정 내용을 정리하였으나 업무에 참고하시기 바랍니다.

• Journal of the Korean Chemical Society
• /
• v.52 no.2
• /
• pp.133-139
• /
• 2008

A new sensitive and selective spectrophotometric method for determination of trace amounts of cadmium using a polyvinyl chloride membrane containing bis-(2-ethylhexyl)phthalate as a solid phase extraction medium was investigated. Bis-(2-ethylhexyl)phthalate has used as a plasticizer. Cd(II) in an aqueous solution was trapped on the membrane in the form of colorful Cd (II)-I- - MG complexes (which MG is malachite green) and the cadmium complex was concentrated in the membrane. The absorbance of the green membrane was measured at 629 nm using a spectrophotometer, and then, the concentration of the cadmium was calculated using a calibration curve, which expressed the relationship between the Cd(II) concentration and the membrane absorbance after coloring for 25 min. The calibration curve was linear in the range of 10-760 μgL-1 cadmium in the test solution. The detection limit based on the 3Sbl criterion was 1.8199 μgL-1 and the relative standard deviations (RSD) were less than 4 % (n=5). The proposed method has been successfully applied to the determination of trace amounts of cadmium in the Tadjan River water sample (Sari-Iran), and the mean value of 28.7 μgL-1 was obtained.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.325-329
• /
• 2016

Extracting natural dyes have been widely studied since the needs of eco-friendly and non-toxic natural dyes increased. In this paper, the natural dyes were extracted from sappan wood, gardenia, and mugwort containing brazilein, crocin, and chlorophyll process. After the extraction with variables of pH of solvent and reaction time, the chromaticity of extracted natural dyes was analyzed using quantitative values from brightness and color coordinate (L, a, b) based on the target colors of red, yellow and green. For the case of brazilein and crocin, the cadmium red and cadmium yellow, respectively were extracted. In the case of sappan wood and gardenia, the red pigment under pH 12 (${\Delta}$ = 18.2) and the yellow pigment at pH 9 (${\Delta}$ = 18.4) were extracted respectively. However, the color of extracted chlorophyll from mugwort was different from the target chrome green.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.285-289
• /
• 2015

With the miniaturization with both high functionality and high integrity of the probe cards, the highly precise laser punching on the zero-shrinkage high strength substrate has attracted more attention recently. Taper occurrence during laser-punching on green sheets appears as a problem in process. The size (diameter) difference between the entrance hole and the exit hole in tapered holes appeared to be inversely proportional to the hole size itself. To suppress taper occurrence, two-stage punching was adopted as the size of second hole was varied from $70{\mu}m$ to $79{\mu}m$ when punching $80{\mu}m$ via holes on the substrate with thickness of $380{\mu}m$. The minimal taper ratio of 11.9 % appeared with second hole size between 70 to $79{\mu}m$ before sintering. Taper ratio reduced to 7 % after zero-shrinkage sintering. The size difference between first hole and second hole appeared minimal when the size of second hole was 95~97 % to that of first hole.