• Membrane Journal
• /
• v.26 no.2
• /
• pp.146-151
• /
• 2016

Sulfonated poly (arylene ether sulfone) (SPAES) random copolymers have merits such as high proton conductivity, relatively low production cost, and thermochemical resistance when applied as polymer electrolyte membranes for fuel cells. However, it is difficult to directly employ SPAES copolymers into practical fuel cell membrane applications owing to their low chemical stability and dimensional instability under harsh operation conditions. A plausible solution is to impregnate SPAES copolymers into support films (e.g., electrospun polyimide support) with interconnected pore structures and high thermochemical toughness. In this study, a SPAES copolymer with a swivel group, which induces high free volume for fast ion transport, is chosen as ionomers to prepare pore-filling membranes (PFMs). The feasibility of the resulting membranes is evaluated via membrane characterizations.

• Korean Journal of Materials Research
• /
• v.29 no.10
• /
• pp.647-655
• /
• 2019

In order to analyze the effect of hot asymmetric rolling on the microstructure and texture of aluminum alloy and to investigate the effect of the texture on the formability and plastic anisotropy of aluminum alloy, aluminum 6061 alloy is asymmetrically rolled at room temperature, $200^{\circ}C$, $350^{\circ}C$, and $500^{\circ}C$, and the results are compared with symmetrically rolled results. In the case of asymmetric rolling, the equivalent strain (${\varepsilon}_{eq}$) is greatest in the upper roll part where the rotational speed of the roll is high and increases with increasing rolling temperature. The increase rate of the mean misorientation angle with increasing temperature is larger than that during symmetrical rolling, and dynamic recrystallization occurs the most when asymmetrical rolling is performed at $500^{\circ}C$. In the case of hot symmetric rolling, the {001}<110> rotated cube orientation mainly develops, but in the case of hot asymmetric rolling, the {111}<110> orientation develops along with the {001}<100> cube orientation. The hot asymmetric rolling improves the formability (${\bar{r}}$) of the aluminum 6061 alloy to 0.9 and reduces the plastic anisotropy (${\Delta}r$) to near zero due to the {111}<110> shear orientation that develops by asymmetric rolling.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.455-460
• /
• 2019

Hydrotreating catalysis refers to a various hydrogenation which saturate an unsaturated hydrocarbon, together with removing heteroatoms such as sulfur, nitrogen, oxygen, and trace metals from different petroleum streams in a refinery. Most refineries include at least three hydrotreating units for upgrading naphtha, middle distillates, gas oils, intermediate process streams, and/or residue. Among them, hydrotreating catalysis for residue are the core of the process, because of its complexity. This article reviews recent progress in tackling the issues found in the upgrading residues by hydrotreating, focusing on the chemistry of hydrodemetallization (HDM) and hydrodesulfurization (HDS). We also discuss the composition and functions of hydrotreating catalysts, and we highlight areas for further improvement.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.543-549
• /
• 2021

Aluminum cast iron has excellent oxidation resistance and good resistance to sulfide and corrosion. Compared to Ti and Ni alloys, it is expected to be a substitute material for structural materials and stainless steels because it is relatively inexpensive to use Fe, which is a non-strategic element. This results in a weight reduction effect of about 30% as compared to the use of stainless steel. With regard to aluminum as an alloying material, it is an element that has been widely used for the alloying of cast iron in recent years. Practical use has been delayed owing to the resulting lack of ductility at room temperature and the sharp decrease in the strength above 600℃ of this alloy, however. The cause of the weak room temperature ductility is known to be environmental embrittlement by hydrogen, and the addition of various alloying elements has been attempted in order to mitigate these shortcomings. Although alloying elements such as vanadium, chromium, and manganese are mainly used to increase the hardness and wear resistance of gray cast iron, the price of finished products containing these elements and the problems associated with alloys with this material impose many limitations.

• Korea Trade Review
• /
• v.42 no.6
• /
• pp.51-67
• /
• 2017

This study analyzes the relationship between globalization and income inequality. The empirical model is developed based on Kuznets' hypothesis of the inverse U curve. The effects of factor abundancy and globalization which is characterized by trade and FDI on income inequality are analyzed. 127 member countries of WTO are classified into 4 groups according to GNI. The period of analysis is 21 years from 1995 to 2015. Results show that 3 groups of countries excluding one group that is high income countries supports Kuznets' hypothesis which is the inverse U curve. Secondly, expansion of trade decreases income inequality of middle income countries but increases high and low income countries. Thirdly, FDI increases income inequality of middle and low income countries. Finally, the increase in capital abundancy lowers income inequality because the capital accumulation increases the productivity of labor.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.6
• /
• pp.1-10
• /
• 2023

The nuclear power plant(NPP)'s Instrumentation and Control(I&C) system periodically conducts integrity checks for the maintenance of self-diagnostic function during normal operation. Additionally, it performs functionality and performance checks during planned preventive maintenance periods. However, there is a need for technological development to diagnose failures and prevent accidents in advance. In this paper, we studied methods for estimating the reliability function by utilizing environmental data and self-diagnostic data of the I&C equipment. To obtain failure data, we assumed probability distributions for component features of the I&C equipment and generated virtual failure data. Using this failure data, we estimated the reliability function using representative artificial intelligence(AI) models used in survival analysis(DeepSurve, DeepHit). And we also estimated the reliability function through the Cox regression model of the traditional semi-parametric method. We confirmed the feasibility through the residual lifetime calculations based on environmental and diagnostic data.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.282-287
• /
• 2023

The effect of stress relief heat treatment temperature and duration time on the microstructure, residual stress and Vickers hardness of additively manufactured Ti-6Al-4V alloy using laser powder bed fusion process was clarified. As a result of stress relief heat treatment for 240 minutes at 823 K and 60 minutes or more at 873 K, residual stress was decreased less than 30 MPa without grain growth and phase transformation which causes dimensional distortion and deterioration of mechanical properties. In addition, hardness was increased with increasing heat treatment temperature and duration time. It was deduced that the refinement of acicular martensitic α' phase due to the increasing duration time of isothermal heat treatment at 773~873 K, which was not detected by XRD and phase map analysis using SEM-EBSD, probably increases the hardness.

• Journal of Animal Science and Technology
• /
• v.54 no.5
• /
• pp.341-347
• /
• 2012

The purpose of this study was to evaluate the effects of dietary Flammulina velutipes mycelium (FVM) on broiler chick performance, pathogenic bacterial (E. coli, Salmonella) counts in caecal contents and amount of $NH_3$ in excreta. Ninety-six broiler chicks (HanHyup No. 3, Korea) were divided into four groups: 1) Control (basal diet), 2) T1 (supplemented with 1% FVM), 3) T2 (3% FVM), and T3 (5% FVM), and rose for 7 weeks. In results, there were no significant differences among treatments in weight gain, feed intake, feed efficiency and carcass yield. However, giblets were significantly increased in FVM treatments compared with control group (p<0.05). The number of Salmonella in caecum was significantly decreased in FVM treatments compared with control group (p<0.05). The number of E. coli was decreased in T2 but increased in T1 and T3 compared with control group. The emission of fecal $NH_3$ gas was significantly decreased in accordance with increasing the feeding level of FVM (p<0.05). In conclusion, our data indicated that the supplementation of high level of FVM could inhibit the Salmonella in caecum and reduce the emission of fecal $NH_3$ gas. Therefore, FVM at 5% level could be added in the diet of broiler chicks.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2006.02a
• /
• pp.109-114
• /
• 2006

최근 Human 지놈 프로젝트를 포함한 다양한 종의 지놈 프로젝트가 수행되고 수많은 지놈정보가 생산되고 있으며 이를 해석하고 서로 연관성를 찾기 위한 다양한 연구가 진행되고 있다. 즉 최신 생명공학과 관련된 연구방향이 DNA의 구조적 해석에서 기능 해석과 유전자들의 상호연관성을 규명하는 방향으로 변화하고 있으며 이를 위한 강력한 도구로서 DNA microarray (DNA chip)는 방대한 양의 지놈 정보를 이용하여 단시간에 대량으로 고속처리하여 효율적으로 유전자 기능을 분석할 수 있는 주목받고 있는 방법이다. DNA microarray 실험과 분석에 있어 데이터분석, 재현성, 종간의 비교, 확인실험 및 비용 등의 문제가 있지만 유전자발현양상 데이터로부터 정확한 환자의 예후를 예측할 수 있는 비교적 적은 유전자 그룹의 진단마커를 찾거나, 하나의 유전자가 아니라 mouse 전체 지놈의 유전자발현 패턴을 인간의 암을 위시한 각종 질병 연구를 위한 발현 신호나 변화 등을 발견하여 신약개발 등에 활용하고자 하는 시도가 활발히 진행되고 있다. 서로 다른 종간에 비슷한 phenotype의 유전자발현도 진화적으로 보존되었다는 전제 하에서 지놈 sequence의 비교연구가 가능하고 DNA microarray 발현 데이터에 근거하여 독립적으로 각 종간의 유전자발현패턴을 비교함으로써 난치병 등을 새롭게 분류할 수 있다. 즉, 암세포 등에서 유전자발현 양상은 유전학적, 환경적 alteration들이 잘 반영되어 있다고 간주하고, 이러한 양상을 바탕으로 인간의 암을 위시한 다양한 질병 연구를 위한 최적의 mouse 모델을 찾을 수 있고, 이는 결국 새로운 치료 방법 개발이나 맞춤의학 실현에 중요한 역할을 할 것으로 기대된다. 특히 pathway 타겟으로 하는 치료를 위해서는 Human-mouse 비교를 통한 발현 신호를 찾는 것이 진단에서는 매우 유용한 방법이다. 이를 위한 고성능의 분석방법이나 시스템의 개발이 중요하게 된다.. 관류의 정도와 조영증강정도를 중심으로 관류 MR 영상소견과 조직학적 소견을 관련지어 분석하였다. 결과: 조영증강 T1강조MR영상에서 환상조영증강을 보이는 다형성 교보세포종 2예에서는 변연부 외륜이 고관류를, 중심부의 괴사부위는 저관류로 나타났다. 저등급 교종은 경계가 불분명한 저관류부위로 보였다. 뇌농양 2예는 변연부 외륜이 경도의 고관류를, 중심부는 저관류로 나타났다. 뇌수막종은 미만성의 균일한 중등도 혹은 고도의 고관류로 보였으며, 임파종과 배아종은 경계가 명확한 저관류부위로 나타났다. 신경세포종은 종괴\ulcorner 일부에 중등도 혹은 고도의 고관류부위가 관찰되었고, 전이암은 다수병변중 일부에서 중등도의 고관류를 보였다. 방사선괴사는 저관류부위내에 국소적 고관류부위를 보였다. 결론: 관류 MR영상은 뇌종양의 관류상태를 비교적 잘 반영하며, 조직학적 특성을 예측하는데에 도움을 주 수 있을 것으로 기대된다. 뇌종야에서의 관류MR영상의 분명한 역할을 규명하기 위해서는 앞으로 더 많은 임상적 연구가 필요할 것으로 생각된다.조증 환자의 자극성 전타액내 lactobacilli양은 peroxidase system을 함유한 세치제를 사용한 군에서 대조군에 비해 상대적으로 낮게 나타났으나(p = 0.067) 통계학적 유의성은 없었다.같은 예에서 찾아 볼 수 있다. 첫째, 발음상으로 동사의 변화형에서 "porte[$p{\jmath}rte$](들다: 현재형), porte[$p{\jmath}rte$](과거분사형), porta[$p{\jmath}rte$](단순과거형)"등이 대립되며, 이휘 "Porto[$p{\jmath}rte$](포르토)"와도 대립된다. 둘째, 어휘적 대립 "le haut[$l{\partial}o$](위)/l'eau[lo](물)"와 형태론적 대립 "le[$l{\partial}$](정관사, 남성단수)/l

• Journal of Digital Convergence
• /
• v.17 no.3
• /
• pp.235-251
• /
• 2019

The purpose of this study was to investigate the single-person household's demand for a wearable healthcare system that provides the ischemic heart disease and cardiopulmonary alarm to be developed. In this study, in-depth interviews were conducted with six unmarried individuals in their thirties who were in the workplace and the results were interpreted by Giorgi's phenomenological analysis method. The study results indicated that although the wearable healthcare system was implemented with high-technology functions that serve the intended purpose, it is necessary to comprehensively consider factors such as aesthetics, comfort, and ease of washing. In this study, we found that the variables influencing the interviewees' intent to accept healthcare services are complex and cannot be attributed to one factor alone; this study has also shown a variety of interpersonal correlations. In addition, although health-care research focusing on the elderly has been conducted in the past, it is suggested that younger generations such as those in their thirties can also be studied as health care service adopters.