• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.358-363
• /
• 2017

The high intercept probability depends on optimization of the system, which consists of target detection, tracking system, missile system and so on. To reduce the complexity of global optimization of the system performance, simplification of the relative dependances of each sub-system is done and design parameters for DACS configuration are identified. The conceptual design process is addressed based on the requirement of the design parameters and new methodology is suggested for higher performance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.181-184
• /
• 2009

In this study, flow visualization method to simulate internal flows of solid rocket motor in a water tunnel is introduced. The tunnel provides excellent visualization of vortex flows and has been used to propellant grain design of the solid rocket motor. A water tunnel is suggested for the research and the visualization test using dye, hydrogen bubble generator and PIV has been studied and discussed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.374-377
• /
• 2007

본 보고서는 소형 로켓 제작에 앞서 행해지는 설계 단계를 기술하였다. 각 요구 조건에 맞춰 사용되어질 추력, 추진제 특성, mass distribution, 동체 형상 설계, Motor 설계에 대해 다뤘다. 로켓 설계에 있어서 가장 중요한 추진제 선정과 노즐형상 설계를 중점적으로 다루었으며, 차후 본 과정에 의하여 소형로켓을 제작하겠다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.72-72
• /
• 2002

건국대학교 연소추진 실험실에서 수행할 하이브리드 로켓 모터 연소특성 연구를 위한 실험장치를 설계하고 구성하였다. 실험장치를 제작하기 전에 기본적인 설계요구사항을 바탕으로 모터의 제작을 위한 수치코드를 작성하였다. 연소실 압력과 그레인의 형상, 산화제와 고체연료의 종류를 바탕으로 작성한 수치코드를 사용하여 로켓 모터를 설계하였다. 모터 설계코드를 통하여 세부적인 로켓모터와 노즐의 크기, 특성속도. 연소시간과 공급산화제의 유량 등을 계산하였고, 설계 전에 문헌연구와 이론을 바탕으로 일반적으로 실험실에서 사용되는 하이브리드 로켓 모터에 근접하게 설계를 진행하여 시행착오를 최소화하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.368-373
• /
• 2017

Control method for DACS with variable burning area is designed and the performance of the control method is analyzed by doing simulation at various conditions. DACS, which got solid propellant on board, is designed as end-burning type typically. End-burning type DACS has the merit of controlling pressure and thrust, but it discharges the combustion gas which does not using for getting thrust. Therefore, optimal design of propellant grain and burning area changes over time as a result. Variable burning area can be assumed as a disturbance and adaptive control method is useful for pressure control of DACS effected by disturbance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.177-180
• /
• 2009

A Possibility of combustion instability on longitudinal mode has a high level at large scale of L/D. Solid propellant has a metal particle and a grain of control to pressure oscillation. Solid rocket motor in slotted-tube grain controls pressure oscillation of longitudinal mode. If slot length is shot, pressure oscillation of longitudinal mode is amplified by cylinder part after middle phase of total burn time. A study has analyzed pressure oscillation of longitudinal mode at spectrum and acoustic modal analysis at pressure of result on static firing test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.4
• /
• pp.21-27
• /
• 2022

In this paper, the combustion characteristics of solid propellant embedded with metal wires were analyzed by the ground tests of motors. The propellant grains were made of thermoplastic propellants with Al and Cu as metal wires for the enhancement of burning area and designed with cone shape for better ignition. These metals were used to confirm the enhancement of burning rate on thermal diffusivity properties. The internal ballistics analysis and ground test were performed to investigate the effect of burning rate for each metal wire. We obtained the results of burning rate on a difference of thermal diffusivity of each metal wire with well-made propellant grains.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.38.1-38.1
• /
• 2021

본 발표에서는 Transformable Reflective Telescope(TRT kit)의 새로운 버전을 소개한다. TRT kit는 기본형인 뉴턴식 반사망원경에서 부경 교체를 통해 카세그레인식, 그레고리식으로 간단하게 변형 할 수 있는 광학 실험장치이다. 본 장치는 주로 망원경 교육이나 광학계 개발에 필요한 실험에 활용된다. 모듈화 설계를 통해서 여러 종류의 광학계를 쉽게 탈착하여 다양한 실험을 할 수 있다. 광기계부는 정밀하게 제작된 알루미늄 프로파일과 Isogrid구조를 채택하여 경량화 구조로 설계되었다. 이러한 경량부품들을 통해 이전 버전보다 50~70%의 중량 감소율을 달성하였다. 유한요소해석 결과 경량화된 뉴턴식 TRT kit는 이전 버전과 비교해서 자체 하중에 의한 최대 구조 변형이 0.11mm에서 0.023mm로 감소하였다. 부경 지지대 설계에는 자체 하중으로 인한 변형을 최소화하기 위해 트러스 (Truss) 구조가 도입되었다. 부경부의 자체 하중으로 인한 변형은 기존의 80㎛에서 21㎛로 감소하였다. 또한, 십자 레이저 정렬 장치가 추가되어 뉴턴식과 카세그레인식에서 공차 1.5' 이내로 광학계 정렬이 가능하다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.261-268
• /
• 2016

In this paper, dual-polarized monopulse cassegrain antenna for W-band millimeter-wave seeker was proposed and the performances were verified by the measured results of the fabricated antenna. Dual-polarized monopulse Cassegrain antenna consists of main/subreflector, dual-polarized feed horn and monopulse comparator. The proposed feed horn has $2{\times}2$ array square waveguide feeding structure to make monopulse signals and it was designed using 90 degree rotational symmetric structure to receive dual-polarized signals. At the sum and difference channel, the measured vertical and horizontal polarization radiation pattern were similar. Measurement gains are 35.1 dBi for v-pol. and 35.6 dBi for h-pol. at the center frequency with 0.5dBi difference between each polarization and the side lobe level is below -21.6 dB.

• Korean Journal of Optics and Photonics
• /
• v.30 no.2
• /
• pp.37-47
• /
• 2019

A reflecting omnidirectional optical system with four spherical and aspherical mirrors, for use with long-wavelength infrared light (LWIR) for night surveillance, is proposed. It is designed to include a collecting pseudo-Cassegrain reflector and an imaging inverse pseudo-Cassegrain reflector, and the design process and performance analysis is reported in detail. The half-field of view (HFOV) and F-number of this optical system are $40-110^{\circ}$ and 1.56, respectively. To use the LWIR imaging, the size of the image must be similar to that of the microbolometer sensor for LWIR. As a result, the size of the image must be $5.9mm{\times}5.9mm$ if possible. The image size ratio for an HFOV range of $40^{\circ}$ to $110^{\circ}$ after optimizing the design is 48.86%. At a spatial frequency of 20 lp/mm when the HFOV is $110^{\circ}$, the modulation transfer function (MTF) for LWIR is 0.381. Additionally, the cumulative probability of tolerance for the LWIR at a spatial frequency of 20 lp/mm is 99.75%. As a result of athermalization analysis in the temperature range of $-32^{\circ}C$ to $+55^{\circ}C$, we find that the secondary mirror of the inverse pseudo-Cassegrain reflector can function as a compensator, to alleviate MTF degradation with rising temperature.