• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.5
• /
• pp.528-533
• /
• 2010

Currently the telephone service using Internet grows and the recent introduction of a smart phone is expected to accelerate the trend. In particular, considering the domestic situation that the wireless broadband (WiBro) system deployed over the nation, the telephone service over WiBro can be a solution toward its fast expansion. Unlike telephone service over a conventional telephone network or mobile network, however, internet telephone cannot guarantee it service quality, which can be severer in a wireless environment such as a WiBro network. Therefore, a more strict and systematic management for controlling the quality of internet telephone service over WiBro in a more efficient way. As the first step to establish the management system, this paper proposes a scheme to manage the quality of internet telephone service over WiBro and introduces a software developed for the purpose. The developed software is installed on a user terminal and facilitates efficient service quality management by measuring the quality of internet telephone service over WiBro in terms of VoIP metric, network metric, and wireless metric.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1076-1085
• /
• 2004

Recently, the demands for real-time service and multimedia data are rapidly increasing. There are significant redundancies between header fields both within the same packet header and in consecutive packets belonging to the same packet stream. And there are many overheads in using the current UDP/IP protocol. Header compression is considered to enhance the transmission efficiency for the payload of small size. By sending the static field information only once initially and by utilizing dependencies and predictability for other fields, the header size can be significantly reduced for most packets. This work describes an implementation for header compression of the headers of IP/UDP protocols to reduce the overhead on Ethernet network. Typical UDP/IP Header packets can be compressed down to 7 bytes and the header compression system is designed and implemented in Linux environment. Using the Header compression system designed between a server and clients provides have the advantage of effective data throughput in network. Since the minimum packet size in Ethernet is 64 bytes, the amount of reduction by header compression in practical chatting environment was 6.6 bytes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.289-298
• /
• 2016

Though, thanks to NPKI(National Public Key Infrastructure), the Korean secure Internet transaction environment has been rapidly grown in the last decade, it also faces with several problems, which need to be solved in near future, mainly resulted from the lack of openness and compatability of the NPKI-based environment which is operating in a closed way. It is believed that those problems of the NPKI can be solved when it is implemented to be based on the SSL/TLS, an international standard for web-based secure Internet transactions. The transition to the SSL/TLS-based NPKI needs to be performed so that the advantages of current NPKI are well maintained. The purpose of this paper is to comparatively analyze the NPKI and the SSL/TLS so as to give basic idea of implementing the current NPKI to be based on the SSL/TLS. The analysis will show not only how the SSL/TLS-based NPKI can improve current NPKI but also how the advantages of current NPKI can be maintained by the SSL/TLS-based NPKI.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.207-210
• /
• 2013

Recently, rapid innovation of Smartphone is changing the paradigm of our daily life. Smartphone users, opinion experts more than 99 percent of the economically active population is using, it has reached the saturation past the early stages of formation. Smartphone is equipped with a general purpose OS possible the implementation of high performance environment similar level as a personal computer. Also, it is a mobile communication terminal scalable which can be removed or installed various applications. Such extensibility, it is possible to use different applications through the Apps store. In addition, it is also possible various services which are location based service. However, these services also benefit many but it also has a disadvantage of invasion of privacy and disclosure of personal information. In this research, we aim to analyze factors influencing on perceived value and risk in location based service of Smartphone. In addition, we aim to analyze the causal relationship with perceived value and risk in satisfaction and recommendation intention. This study suggests practical and theoretical implications based on the results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1C
• /
• pp.54-62
• /
• 2012

A Wi-Fi mesh network providing multi-hop wireless connections based on IEEE 802.11 PHY/MAC technology has recently received a significant attention as a network infrastructure that interconnects RFID systems and wireless sensor networks (WSNs). However, the current IEEE 802.11 contention-based MAC protocol cannot fully utilize the network capacity due to eithor frame collisions or unused network resources. In this paper, we propose a novel multi-channel scheduling MAC (MCS-MAC) protocol for Wi-Fi mesh networks. Under the secondary interference model of Wi-Fi mesh networks, the MCS-MAC protocol can maximize the network throughput via activation of collision-free links that has a maximal link weight. Through the simulations, we show that the throughput of the MCS-MAC protocol is at least three times higher than that of existing MAC protocols in Wi-Fi mesh networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6C
• /
• pp.483-491
• /
• 2012

In vehicle-to-vehicle (V2V) communications, each vehicle should periodically disseminate a beacon message including the kinematics information, such as position, speed, steering, etc., so that a neighbor vehicle can better perceive and predict the movement of the vehicle. However, a simple broadcasting of such messages may lead to a low reception probability as well as an excessive delay. In this paper, we attempt to analyze the impact of the following key parameters of the beacon dissemination on the performance of vehicular networks: beacon period, carrier-sensing range, and contention window (CW) size. We first derive a beacon period which is inversely proportional to the vehicle speed. Next, we mathematically formulate the maximum beacon load to demonstrate the necessity of the transmit power control. We finally present an approximate closed-form solution of the optimal CW size that leads to the maximum throughput of beacon messages in vehicular networks.

• Journal of Digital Contents Society
• /
• v.18 no.5
• /
• pp.811-820
• /
• 2017

For content-based audio retrieval which is one of main functions in audio service, the techniques for extracting fingerprints from the audio source, storing and indexing them in a database are widely used. However, if the fingerprints of new audio sources are continually inserted into the database, there is a problem that space efficiency as well as audio retrieval performance are gradually deteriorated. Therefore, there is a need for techniques to support efficient expansion of audio database without periodic reorganization of the database that would increase the system operation cost. In this paper, we design a content-based audio retrieval system that solves this problem by using MapReduce and NoSQL database in a cluster computing environment based on the Shazam's fingerprinting algorithm, and evaluate its performance through a detailed set of experiments using real world audio data.

• Journal of Digital Contents Society
• /
• v.18 no.3
• /
• pp.593-598
• /
• 2017

In this paper, the factors that affect the festival satisfaction level were investigated by using the visitors of the 2016 Seoul Rose Festival as study subjects, and by understanding the factors that have high satisfaction levels, the satisfaction levels were evaluated and analyzed through data mining so as to allow an assessment of future festival satisfaction levels. Surveys were conducted on the visitors of the festival and a regression analysis was performed in order to test the goodness of fit of the collected data. Afterwards, data mining was used to analyze the assessment. As a result of the regression data, amenities were identified as affecting the festival satisfaction levels the most; and the data mining analysis results, as well, showed that the most important category affecting the festival satisfaction level was amenity, similar to the regression analysis.

• Journal of the Korea Society for Simulation
• /
• v.21 no.3
• /
• pp.11-16
• /
• 2012

Simulation is the imitation of the operation of a real-world process or system over time. It concerns the study of the operating characteristics of real systems. Typically, a simulation project consists of several steps such as data collection, coding, model verification, model validation, experimental design, output data analysis, and implementation. Among these steps of a simulation study this paper focus on statistical analysis methods of simulation output data. Specially, we explain how to develop confidence interval estimators for mean ${\mu}$ in terminating and non-terminating simulation cases. We, then, explore the estimation techniques for $f({\mu})$, where the function $f({\bullet})$ is a nonlinear that is continuously differentiable in a neighborhood of ${\mu}$ with $f'({\mu}){\neq}0$.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.4 no.1
• /
• pp.29-34
• /
• 2010

The fully implantable hearing devices (FIHDs) have been studied to compensate the defect of conventional hearing aids. Typically, a microphone for FIHDs was implanted under the skin of the temporal bone. So, implantable microphone characteristics can be affected by the eating food, chattering teeth and moving artifact. In this paper, we fabricated the physical model that was similar to characteristics of human temporal bone and skin, and we measured implanted microphone sensitivity for effect of bone conducted noise signal. For the measurement of microphone sensitivity, we applied 1 kHz pure sounds that were transmitted to implanted microphone and sine wave vibrations of varied frequency were simultaneously transmitted through the artificial bone. As a result, sensitivity of implanted microphone can be modified by bone conducted signal and this phenomenon was confirmed at varied frequency band.