• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.10 no.4
• /
• pp.81-93
• /
• 2000

In a methodological approach to improve the processing performance of modulo exponentiation which is the primary arithmetic in RSA crypto algorithm, we present a new RSA hardware architecture based on high-radix modulo multiplication and CRT(Chinese Remainder Theorem). By implementing the modulo multiplier using radix-16 arithmetic, we reduced the number of PE(Processing Element)s by quarter comparing to the binary arithmetic scheme. This leads to having the number of clock cycles and the delay of pipelining flip-flops be reduced by quarter respectively. Because the receiver knows p and q, factors of N, it is possible to apply the CRT to the decryption process. To use CRT, we made two s/2-bit multipliers operating in parallel at decryption, which accomplished 4 times faster performance than when not using the CRT. In encryption phase, the two s/2-bit multipliers can be connected to make a s-bit linear multiplier for the s-bit arithmetic operation. We limited the encryption exponent size up to 17-bit to maintain high speed, We implemented a linear array modulo multiplier by projecting horizontally the DG of Montgomery algorithm. The H/W proposed here performs encryption with 15Mbps bit-rate and decryption with 1.22Mbps, when estimated with reference to Samsung 0.5um CMOS Standard Cell Library, which is the fastest among the publications at present.

• Phonetics and Speech Sciences
• /
• v.13 no.4
• /
• pp.1-7
• /
• 2021

This study aims to enhance English pronunciation education for Korean students by examining the impact of standard Korean and Gyeongsang regional dialect on the articulation of English vowels. Data were obtained through the Korean-Spoken English Corpus (K-SEC). Seven Korean words and ten English mono-syllabic words were uttered by adult, male speakers of standard Korean and Gyeongsang regional dialect, in particular, speakers with little to no experience living abroad were selected. Formant frequencies of the recorded corpus data were measured using spectrograms, provided by the speech analysis program, Praat. The recorded data were analyzed using the articulatory graph for formants. The results show that in comparison with speakers using standard Korean, those using the Gyeongsang regional dialect articulated both Korean and English vowels in the back. Moreover, the contrast between standard Korean and Gyeongsang regional dialect in the pronunciation of Korean vowels (/으/, /어/) affected how the corresponding English vowels (/ə/, /ʊ/) were articulated. Regardless of the use of regional dialect, a general feature of vowel pronunciation among Korean people is that they show more narrow articulatory movements, compared with that of native English speakers. Korean people generally experience difficulties with discriminating tense and lax vowels, whereas native English speakers have clear distinctions in vowel articulation.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.45-55
• /
• 2022

BIM models allow building spaces to be instantiated and recognized as unique objects independently of model elements. These instantiated spaces provide the required semantics that can be leveraged for building code checking, energy analysis, and evacuation route analysis. However, theses spaces or rooms need to be designated manually, which in practice, lead to errors and omissions. Thus, most BIM models today does not guarantee the semantic integrity of space designations, limiting their potential applicability. Recent studies have explored ways to automate space allocation in BIM models using artificial intelligence algorithms, but they are limited in their scope and relatively low classification accuracy. This study explored the use of Graph Convolutional Networks, an algorithm exclusively tailored for graph data structures. The goal was to utilize not only geometry information but also the semantic relational data between spaces and elements in the BIM model. Results of the study confirmed that the accuracy was improved by about 8% compared to algorithms that only used geometric distinctions of the individual spaces.

• Journal of Industrial Convergence
• /
• v.21 no.1
• /
• pp.187-192
• /
• 2023

In this study, trends in ICT education were investigated by analyzing the frequency of appearance of keywords related to machine learning and using conversion of iteration correction(CONCOR) techniques. A total of 304 papers from 2018 to the present published in registered sites were searched on Google Scalar using "ICT education" as the keyword, and 60 papers pertaining to ICT education were selected based on a systematic literature review. Subsequently, keywords were extracted based on the title and summary of the paper. For word frequency and indicator data, 49 keywords with high appearance frequency were extracted by analyzing frequency, via the term frequency-inverse document frequency technique in natural language processing, and words with simultaneous appearance frequency. The relationship degree was verified by analyzing the connection structure and centrality of the connection degree between words, and a cluster composed of words with similarity was derived via CONCOR analysis. First, "education," "research," "result," "utilization," and "analysis" were analyzed as main keywords. Second, by analyzing an N-GRAM network graph with "education" as the keyword, "curriculum" and "utilization" were shown to exhibit the highest correlation level. Third, by conducting a cluster analysis with "education" as the keyword, five groups were formed: "curriculum," "programming," "student," "improvement," and "information." These results indicate that practical research necessary for ICT education can be conducted by analyzing ICT education trends and identifying trends.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.532-544
• /
• 2023

Purpose: To identify and evaluate the risk of chemical fire causative substances by using thermal analysis methods (DSC, TGA) for the hazards and physical property changes that occur when newly used biofuels are mixed with existing fuels It is to use it for identification and evaluation of the cause of fire by securing data related to the method and the hazards of the material according to it. Method: The research method used in this experiment is the differential scanning calorimeter (DSC: Difference in heat flux) through quantitative information on the caloric change from the location, shape, number, and area of peaks. flux) was measured, and the weight change caused by decomposition heat at a specific temperature was continuously measured by performing thermogravimetric analyzer (TGA: Thermo- gravimetric Analyzer). Result: First, in the heat flux graph, the boiling point of the material and the intrinsic characteristic value of the material or the energy required for decomposition can be checked. Second, as the content of biodiesel increased, many peaks were identified. Third, it was confirmed through analysis that substances with low expected boiling points were contained. Conclusion: It was shown that the physical risk of the material can be evaluated by using the risk of biodiesel, which is currently used as a new energy source, through various physical and chemical analysis techniques (DSC + TGA).In addition, it is expected that the comparison of differences between test methods and the accumulation and utilization of know-how on experiments in this study will be helpful in future studies on physical properties of hazardous materials and risk assessment of materials.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.4
• /
• pp.83-91
• /
• 2023

In this paper, we propose a robustness sensitivity index (RSI) of highway networks to analyze the effect of congestion in a specific section on the entire highway. The newly proposed RSI is defined as the change in the total mileage of the transportation network per extended unit length when the length of a particular section is extended. When the RSI value is large, traffic congestion in the section has a worse effect on the entire network than in other sections. The existing network robustness index (NRI) simply observes changes in transportation networks with and without specific sections, but the RSI proposed in this study is a kind of performance indicator that allows quantitative analysis of the ripple effect of the entire network according to the degree of congestion in a specific section. While changing the degree of congestion in a particular section, it is possible to calculate how the traffic volume increases, decreases, and the size and location of the congestion section change. This analysis proves the superiority of RSI as it cannot be analyzed with NRI. Various properties of RSI are analyzed using data from the domestic highway network. In addition, using the RSI concept, it is shown that the ripple effect on other sections in which a change in the degree of congestion of a specific section occurs can be analyzed.

• Journal of The Korean Association For Science Education
• /
• v.27 no.1
• /
• pp.59-69
• /
• 2007

The aim of this study was to investigate teachers' perceptions on MBL (microcomputer-based laboratory) experiment training program for teachers, the expecting effects of MBL experiment and application of MBL experiment after conducting MBL experiment training for science classes in schools. This study showed that most of the teachers who participated in the training program thought that the MBL experiment training program was very useful and instructive. Many teachers considered that MBL experiments using a computer could decrease time spent in the experiment by accurate and fast data collection and analysis. They also thought that the reduced time could be used more effectively in the analysis of experimental data and discussion activities leading to correct concept formation as well as in the development of graphical analysis and science process skills. However, they thought that MBL experiments were ineffective in learning how to operate experiment apparatus. This study also revealed that most teachers intended to apply MBL experiments in real classrooms context right after the training course and they pointed out many obstacles in introducing MBL experiments into their classrooms such as a budget to purchase equipment, poor laboratory conditions, and few MBL experiment training opportunities. In order to apply MBL experiment into the real classrooms, further changes were suggested as follows; development of technologies to reduce unit cost of equipment for MBL experiments, production and supply of many kinds of sensors, development of MBL experiment materials, and expansion of the training program for teachers.

• Journal of Service Research and Studies
• /
• v.14 no.2
• /
• pp.18-36
• /
• 2024

As interest in ESG has been increased, it is easy to find papers that empirically study that a company's ESG activities have a positive impact on the company's performance. However, research on what ESG activities companies should actually engage in is relatively lacking. Accordingly, this study systematically classifies ESG activities of companies and seeks to provide insight to companies seeking to plan new ESG activities. This study analyzes how Chinese manufacturing companies perform ESG activities based on their dynamic capabilities in the global economy and how they differ in their activities. This study used the ESG annual reports of 151 Chinese manufacturing listed companies on the Shanghai & Shenzhen Stock Exchange and ESG indicators of China Securities Index Company (CSI) as data. This study focused on the following three research questions. The first is to determine whether there are any differences in ESG activities between companies with high ESG scores (TOP-25) and companies with low ESG scores (BOT-25), and the second is to determine whether there are any changes in ESG activities over a 10-year period (2010-2019), focusing only on companies with high ESG scores. The results showed that there was a significant difference in ESG activities between high and low ESG scorers, while tracking the year-to-year change in activities of the top-25 companies did not show any difference in ESG activities. In the third study, social network analysis was conducted on the keywords of E/S/G. Through the co-concurrence matrix technique, we visualized the ESG activities of companies in a four-quadrant graph and set the direction for ESG activities based on this.

• Korean Journal of Environment and Ecology
• /
• v.38 no.2
• /
• pp.127-142
• /
• 2024

This study aimed to understand the interrelationships between tree species in plant communities through Plant Social Network (PSN) analysis using a large amount of vegetation data surveyed in an island area belonging to a warm-temperate boreal forest. The Machilus thunbergii, Castanopsis sieboldii, and Ligustrum japonicum, which belong to the canopy layer, Pittosporum tobira and Ardisia japonica, which belong to the shrub layer and Trachelospermum asiaticum and Stauntonia hexaphylla, which belong to the vines, appearing in evergreen broad-leaved climax forest community, showed strong positive association(+) with each other. These tree species had a negative association or no friendly relationship with deciduous broad-leaved species due to the large difference in location environments. Divided into 4 group modularizations in the PSN sociogram, evergreen broad-leaved tree species in Group I and deciduous broad-leaved tree species in Group II showed high centrality and connectivity. It was analyzed that the arrangement of tree species (nodes) and the degree of connection (grouping) of the sociogram can indirectly estimate environmental factors and characteristics of plant communities like DCA. Tree species with high centrality and influence in the PSN included T. asiaticum, Eurya japonica, Lindera obtusiloba, and Styrax japonicus. These tree species are common with a wide range of ecological niches and appear to have the characteristics and survival strategies of opportunistic species that commonly appear in forest gaps and damaged areas. They will play a major role in inter-species interactions and structural and functional changes in plant communities. In the future, long-term research and in-depth discussions are needed to determine how these species actually influence plant community changes through interactions

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.3
• /
• pp.1-16
• /
• 2024

In the present highway design guidelines suggest that the capacity of one-lane hi-pass lanes is 2,000 veh/h for mainline toll plaza and 1,700 veh/h for interchange toll plaza. However, in a study conducted in early 2010, capacity of the mainline toll plaza was presented with 1,476 veh/h/ln to 1,665 veh/h/ln, and capacity of the interchange toll plaza was presented as 1,443 veh/h/ln. Accordingly, this study examined the feasibility of the capacity of the currently proposed highway one-lane hi-pass lane. Based on the 2021 individual vehicle passing data collected from the one-lane hi-pass gantry, the speed-traffic volume relationship graph and headway were used to calculate and compare capacity. In addition, the bootstrapping technique was introduced to utilize the headway and new processing methods for collected data were reviewed. As a result of the analysis, the one-lane hi-pass capacity could be estimated at 1,700 veh/h/ln for the interchange toll plaza, and at least 1,700 veh/h/ln for the mainline toll plaza. In addition, by using the bootstrap technique when using headway data, it was possible to present an estimated capacity similar to the observed capacity.