• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.757-767
• /
• 1996

Poly(alkyl acrylate-g-caprolactone) graft copolymers were prepared, and they were applied as compatibilizing agents for polycarbonate (PC) / poly(acrylonitrile-butadiene-styrene) (ABS) blends. The incompatible poly(alkyl acrylate) segment was incorporated into the graft copolymer in order to localize the copolymer at the PC/ABS interface. The blend containing 1 phr of the copolymer showed remarkable improvement in impact strength as well as in elongation at break. Impact improvement was more pronounced with a thinner test specimens of 1/8 inch thickness. Morphological study showed that the presence of the graft copolymer led to a smoother PC/ABS interface due to the interfacial enrichment of the graft copolymer.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.621-628
• /
• 2000

Microporous polypropylene (PP) membranes have the high chemical and corrosion resistance, the good mechanical properties and the thermal stability under high temperatures, but its application is restricted within narrow limits due to hydrophobicity of membranes. In order to impart permanent hydrophilicity to the PP microfiltration membrane, the radiation-induced graft of 2-hydroxyethyl methacrylate (HEMA) and acrylic acid (AAc) containing hydrophilic functional group onto the membrane has been studied. The effect of graft conditions such as reaction time, total radiation dose, reaction temperatures, acid compositions on graft yield was investigated. Modified PP membranes were shown to cause an increase in the gas flux. Oil emulsion permeation flux of both original PP membrane and modified PP membrane was examined.

• Journal of the Korean Chemical Society
• /
• v.20 no.4
• /
• pp.316-320
• /
• 1976

Based on the results of graft copolymerization to proteins, an attempt is made to derive the rate equations to explain the mechanism of Ce(IV) ion-initiated graft copolymerizations. In this system the oxidative termination by Ce(IV) $[R{\cdot}+ Ce(IV) ${\rightarrow}$ R(inert) + Ce(III) + H^+]$ is considered characteristic particularly in higher concentration of Ce(IV) ion. The change in the mode of termination reactions with change in Ce(IV) ion concentration makes possible the presence of an optimum Ce(IV) ion concentration for maximum graft copolymerization yield. This effect is reflected in presently derived equations.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.935-941
• /
• 1998

New type of chitosan deriertives was synthesised by graft copolymerization of mono(2-methacryloyl oxyethyl) acid phosphate into chitosan. The reaction conditions showing the highest percentage of grafting were an initiator concentration of $3.5{\times}10^{-3}M$, monomer concentration of 0.19 M, and reaction temperature of $40^{\circ}C$, while rate of grafting showed same value after elapsing 4hours of reaction time. The antifungal activity of chitosan depending on content of free amine and kind of monomer was examined against Candida albicans, Trichophyton rubrum and Trichophyton uiolaceum by shake flask method. The pH value of buffer solution to show the highest antifungal activity was 5.75, and the selectivity of mold strain was observed.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.516-522
• /
• 1998

In this study, a water adsorbent was synthesized by radiation grafting of acrylic acid and multifunctional monomers such as 1,2-propanediol dimethacrylate (PDMA) and 1,1,1-trimethylolethane triacrylate (TMETA) onto cellulose and its subsequent treatment with 5% NaOH. Its absorbency on $H_2O$ and 0.9 % NaCl aqueous solution was examined. The highest absorbency on water and on 0.9% NaCl aqueous solution was obtained from the addition of 0.75 vol % PDDMA and of 1.0 vol % TMETA onto acrylic acid solution, respectively. The absorbency of commercial hygienic band on water and NaCl aqueous solution was 21 g/g and 22 g/g, respectively. However, that for acrylic acid-grafted cellulose including TMETA was 298 g/g and 54 g/g, respectively.

• Elastomers and Composites
• /
• v.47 no.3
• /
• pp.216-222
• /
• 2012

In this study, p-acryloyloxybenzoic acid(ABA) was synthesized with p-hydroxybenzoic acid(HBA) and acryloyl chloride(AC). The synthesized ABA monomer was grafted onto ethylene-propylene-diene rubber(EPDM) in toluene using benzoyl peroxide(BPO) as an initiator. The structures of ABA and EPDM-g-ABA were characterized by FT-IR, $^1H$-NMR, and $^{13}C$-NMR spectrometer. The graft ratio of EPDM-g-ABA increased with increasing the concentration of the initiator and the monomer. Mechanical properties such as tensile strength and compression set of the EPDM-g-ABA were improved with increasing the graft ratio. The $T_g$ and initial decomposition temperature were also increased with increasing the graft ratio.

• Journal of the Korean Chemical Society
• /
• v.20 no.4
• /
• pp.309-315
• /
• 1976

An efficient separation method and the utilization of sericin are searched. Sericin was extracted with hot water from cocoons under atmospheric pressure. The separated sericin was gel-filtrated with Sephadex G-75 and G-150 at room temperature and at $70^{\circ}C$. The results indicated that sericin is consisted of only one fraction in elution diagram. In the graft copolymerization of acrylonitrile to sericin ceric ammonium nitrate was chosen as an initiatior. A maximum yield was obtained at certain concentration of the initiator confirming our previous experiments. Viscosity measurement of alkali-hydrolyzed graft copolymers indicated that the polyacrylonitrile graft had the molecular weight in the range of 7,000.

• Journal of Adhesion and Interface
• /
• v.1 no.1
• /
• pp.23-29
• /
• 2000

Surface modification of hydrophobic polymeric materials to be hydrophilic or to have specific functional groups is of great importance for a diversity of applications of the materials. In this study, polyethylene (PE) film surfaces were modified by vapor phase photografting of hydrophilic vinyl monomers with different functional groups. The functional monomers were introduced on PE films by introducing the monomers in vapor phase using a vapor phase photografting apparatus designed by our laboratory. Functional monomers used were acrylic acid (negatively chargeable), acrylamide and allylalcohol (neutral), and allylamine and N,N-dimethyl aminopropyl acryamide (positively charged). The functional monomer-grafted PE film surfaces were characterized by the measurement of water contact angles and the attenuated total reflectance Fourier-transform infrared spectroscopy. The vapor phase photografting seems to be effective means for introduction of various functional groups onto polymeric substrates.

• Journal of Chest Surgery
• /
• v.41 no.2
• /
• pp.239-246
• /
• 2008

Background: Aortic surgery for high risk patients has high mortality and morbidity rates, and the necessity of performing aortic surgery in cancer patients is questionable because of their short life expectancy. Endovascular repair of aneurysm repair can be considered for high risk patients and cancer patients because it has relatively lower invasiveness and shorter recovery times than aortic surgery does. Especially, percutaneous endovascular stent graft treatment is more useful for high risk patients because it does not require general anesthesia. Material and Method: From July 2003 to September 2007, twelve patients who had inoperable malignancy or who had a high risk of complication because of their combined diseases during aortic surgery underwent endovascular aortic aneurysm repair. he indications for endovascular repair were abdominal aortic aneurysm in 5 patients, descending thoracic aortic aneurysm in 6 patients and acute type B aortic dissection in one patient. The underlying combined disease of these patients were malignancy in 3 patients, respiratory disease in 6 patients, old age with neurologic disease in 6 patients, Behcet's iseae in one patient and chronic renal failure in one patient. Result: Stent grafts were inserted percutaneously in all cases. There were 4 hospital deaths and there were 3 delayed deaths during the follow-up periods. There were no deaths from aortic disease, except one hospital death. There were several complications: a mild cerebrovascular accident occurred in one patient, acute renal failure occurred in 2 patients and ischemic bowel necrosis occurred in one patient. Mild type I endoleak was observed in 2 patients and type II endoleak was observed in a patient after stent graft implantation. Newly developed type I endoleak was observed in a patient during the follow-up period. Conclusion: Percutaneous endovascular stent graft insertion is relatively safe procedure for high risk patients and cancer patients. Yet it seems that its indications and its long term results need to be further researched.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.130-132
• /
• 1998

정밀여과막(MF)막은 $0.1~1\mum$정도의 공경을 가지고 있는 막으로 산업이나 생활분야에서 널리 사용되고 있다. 이러한 정밀여과막에 이온교환기를 부여 시키므로써, 필요로하는 금속이온이나 단백질을 흡착할 수 있는 기능성 분리막이 제조 가능하다. 방사선프라프트 중합법은 고분자를 개질, 수식 또는 기능화시키는 수법으로 사용되고 있다. 본 실험에서는 방사선그라프트중합법을 사용하여 폴리에틸렌 정밀여과막에 에폭시기를 가지는 glycidyl methacrylate(GMA)를 그라프트 중합시킨 후 이온 교환기를 도입하여, 얻어진 막의 특성에 대해 고찰하였다. 본실험의 목적은 다음과 같다. (1) 폴리에틸렌 정밀여과 막에 방사선그라프트 중합법을 사용하여 이온교환기를 도입시키는 반응조건을 검토한다. (2) 도입된 이온교환기에 다른 막의 투과 성능을 조사한다. (3) 투과법에 의한 금속이온의 흡착성능을 조사한다. 여기서, 이온교환기로서는 술폰산(sodium sulfite:$SO_3H$)을 사용하였다.