• Journal of Internet Computing and Services
• /
• v.13 no.5
• /
• pp.55-64
• /
• 2012

Nowadays, as Cloud computing becomes popular, a need for a DFS(distributed file system) is increased. But, in the current Cloud computing environments, there is no DFS framework that is sufficient to protect sensitive private information from attackers. Therefore, we designed and proposed a secure scheme for distributed file systems. The scheme provides confidentiality and availability for a distributed file system using a secret sharing method. In this paper, we measured the speed of encryption and decryption for our proposed method, and compared them with that of SEED algorithm which is the most popular algorithm in this field. This comparison showed the computational efficiency of our method. Moreover, the proposed secure read/write model is independent of Hadoop DFS structure so that our modified algorithm can be easily adapted for use in the HDFS. Finally, the proposed model is evaluated theoretically using performance measurement method for distributed secret sharing model.

• Korean Journal of Food Science and Technology
• /
• v.20 no.5
• /
• pp.666-673
• /
• 1988

The enhancement of the growth of lactic bateria in rice-based beverage was achieved by the prefermentation of cereals with a mixed culture of Bacillus and yeast followed by extrusion cooking. The rice-soybean milk blend was inoculated with a mixed culture of Bacillus laevolactis and Saccaromyces cerevisiae, and fermented in solid state at $45^{\circ}C$. It was extruded in an autogenous single screw extruder for sterilization as well as for partial digestion, and subjected to lactic fermentation in liquid state. The combined prefermentation and extrusion cooking increased the content of water soluble solid. It stimulated the growth of lactic bacteria as well as the acid production and increased dispersion stability and sensory acceptability.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.123-126
• /
• 2016

Energy efficiency in heterogeneous network is considered as one of the main issues when deploying the wireless sensor network. In heterogeneous network, the random distribution of initial energy at each node could lead to an instability of the network. Therefore, a resonable policy must be established in order to maintain the fairness in energy consumption and extend the working time of each node in the network. In this paper, we evaluate the performance of the distributed clustering protocol (DCP) in heterogeneous network on different scenarios. Simulation results are compared with the results of a LEACH protocol in a heterogeneous network. In addition, the performance of system in heterogeneous network are also compared with the homogeneous network to illustrate the effect of imbalance in the initial energy on the life time of each node in the system. The result illustrates that the DCP protocol demonstrates better performance than LEACH protocol in both the heterogeneous and the homogeneous networks.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.165-174
• /
• 1995

A stable suspension with a colloidal $ZrO_2$ particle was prepared by an adsorption of PV A and investigated to the effects of PV A on the dispersion and particle growth within suspension. With a suspension added the optimum concentration of PYA (about 500 ppm in this study), it was shown the property of a stable sol due to the formation of adsorbed PV A layer on surface and the reduction of an agglomeration among the particles. Most of nucleation in colloidal $ZrO_2$ were occured in the early stage of hydrolysis reaction and the plate-like monoclinic $ZrO_2$ particle were grown with an aging time. The rate of particle growth and yield for a reaction were decreased with an addition of PV A. The compact prepared from well- dispersed suspension by an addition of PV A was contained the homogeneous particle arrangement and pore distribution.

• Journal of the Korean Society for Railway
• /
• v.14 no.4
• /
• pp.333-340
• /
• 2011

The purpose of this paper is to develop two kinds of finite element models for the heavy deformable obstacle defined in grade crossing collision scenario of the Europe TSI and the Korean rolling stock safety regulations and to apply the crashworthiness evaluation for the Korean high-speed EMU with the FE model. The numerical models of the heavy obstacle were changed from a past rigid one to a current deformable one whose stiffness requirement should be verified by a collision simulation defined in the regulations. Through several trial simulations, two types of numerical models for the heavy obstacle were developed, which satisfied physical properties specifies in the regulations. One is a solid-type obstacle with uniform density and the other is a shell-type. With the obstacles developed in this study, the grade crossing collision scenario for Korean high-speed EMU was simulated and evaluated for the two-type obstacle models. From the simulation results, the shell and solid-type obstacles showed quite different behaviors after collision, and the shell type model gave more severe results.

• Composites Research
• /
• v.28 no.4
• /
• pp.232-238
• /
• 2015

As a new method to predict the degree of dispersion in carbon nanocomposites, the electrical resistance (ER) method has been evaluated. After CNT epoxy resin was dropped on CF tow, the change in electrical resistance of carbon fiber tow was measured to evaluate dispersion condition in CNT epoxy resin. Good dispersion of CNTs in carbon nanocomposite exhibited low change in ER due to wetted resin penetrated on CF tow. However, because CNT network was formed among CFs, non-uniform dispersion occurred due to nanoparticle filtering effect by CF tow. The change in ER for poor dispersion exhibited large ER signal change. The change in ER was used for the dispersion evaluation of CNT epoxy resin. Correlation between interlaminar shear strength (ILSS) and dispersion condition by ER method was established. Good CNT dispersion in nanocomposites led to good interfacial properties of fiberreinforced nanocomposites.

• Composites Research
• /
• v.28 no.6
• /
• pp.348-355
• /
• 2015

NDT (Non Destructive Test) of the adhesive joints is very important because their strengths have greatly affected by the worker's skill and environmental condition. Recently, the electric impedance method in which 1-2 wt% CNT was dispersed in the adhesive and the electric resistance of the adhesive joint was measured was suggested for the defect detection of the adhesive joint. The uniform dispersion of CNT in the electric impedance method is very important to make a constant electric resistance of the adhesive joint and the accuracy of defect detection depends on the uniform dispersion. In this paper, the adhesive joints in which CNT was dispersed in the adhesive by the four dispersion methods were made and their electric resistance were measured. The pre-process and evaporation process of CNT using the ultrasonic method and agitation method was used and the effective dispersion method was suggested. Also, the criteria to evaluate the dispersivity was proposed.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1662-1663
• /
• 2011

본 논문에서 하지 정맥 지료를 위한 마이크로파 시스템에서 사용될 가열 안테나의 전계 분포를 균일하게 형성시키기 위해 철사 도파관 안테나를 설계 및 제작하였다. 일반적인 도파관 안테나에 경우 안테나 중심 부분에 전계가 가장 세게 분포되어 온도가 다른 곳에 비해 차이가 많이 나므로 인체 피부가 회상을 입힐 위험이 있다. 제안된 철사 도파관 안테나는 끝단에 가느다란 철을 이용하여 전기장을 철사 부분에 집중시켜 안테나 중앙 부분에 집중된 전기장을 분산되도록 설계하였다. 따라서 전기장을 소스로 하는 온도도 균일하게 분포하게 된다. 제안된 철사 도파관 안테나 내부의 전계 분포는 Ansoft 사의 HFSS, 온도 분포는 CST 사의 MWS(Microwave Studio)를 이용하여 시뮬레이션을 하였고, 일반적인 안테나 경우보다 더 균일한 전계와 온도 분포 특성을 보임을 확인하였다. 제작된 철사 안테나는 사용주파수 15GHz에서 -10dB 이하의 반사 손실을 보였다. 또한 안테나 타당성을 검증하기 위해 개구면 앞에 돼지 껍데기를 두고 일정시간 가열하여 일반 안테나와 제안된 철사 도파관 안테나 온도 분포를 비교하였다. 열화상 카메라를 이용한 실험결과 일반 안테나에 경우 중앙과 가장 자리부분 사이에 약 $29^{\circ}C$, 제안된 철사 도파관 안테나에 경우에는 약 $12.5^{\circ}C$의 차이를 보였다. 이를 통해 제안된 철사 도파관 안테나가 전계 분포 균일성 향상에 기여함을 확인하였다.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.403-406
• /
• 2013

This paper describes a simple route to synthesis of water-dispersible monodisperse maghemite (${\gamma}-Fe_2O_3$) nanocrystals using 6-aminohexanoic acid (AHA) as a stabilizer. The water-dispersible ${\gamma}-Fe_2O_3$ nanocrystals with an average size of 5 nm were obtained simply by addition of $Fe(CO)_5$ into an octyl ether solution containing AHA at $195^{\circ}C$ under argon condition. As-prepared AHA coated ${\gamma}-Fe_2O_3$ nanocrystals exhibited highly crystallinity and magnetic property while keeping a good dispersity in an aqueous phase. We also obtained water-dispersible AHA coated ${\gamma}-Fe_2O_3$ nanocrystals using ligand-exchange method, demonstrating that AHA can be a good candidate for preparing water-dispersible uniform metal oxide nanocrystals.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.185-185
• /
• 2012

중공 발광 나노 물질은 특유의 구조적 특성(낮은 밀도, 높은 비표면적, 다공성 물질, 낮은 열팽창계수 등)과 광학적 성질을 이용하여 디스플레이 패널, 광결정, 약물전달체, 바이오 이미징 라벨 등의 다양한 적용이 가능하다. 이러한 적용에 있어 균일한 크기와 형태의 중공 입자는 필수 조건으로 여겨진다. 지금까지 합성된 중공 발광 입자에는 BaMgAl10O17 : Eu2+-Nd3+, Gd2O3 : Eu3+, $EuPO_4{\cdot}H_2O$과 같은 것들이 있으나 크기 조절이 어렵고, 그 균일성이 확보되지 못하였다. 균일한 크기의 중공 발광 입자를 만들기 위해 SiO2나 emulsion을 템플릿으로 이용하여 황화카드뮴, 카드뮴 셀레나이드 중공 입자를 합성한 예가 있으나, 양자점의 독성으로 인하여 바이오분야 응용에는 적합하지 않다. YAG는 모체로써 형광체에서 가장 많이 이용되는 물질로, 화학적 안정성과 낮은 독성, 높은 양자 효율 등 많은 장점을 갖고 있다. 특히 세륨이 도핑된 YAG형광체의 경우 WLED, 신틸레이터, 바이오산업에 적용이 가능하다. 그러나 지금까지 중공 YAG:Ce3+형광체를 합성한 예가 없었다. 본 연구에서는 단분산 수화 알루미늄 (Al(OH)3) 입자 위에 세륨이 도핑 된 이트륨 베이직 카보네이트 ($Y(OH)CO_3$)를 균일하게 코팅한 후 열처리를 하여 균일한 크기의 Y3Al5O12:Ce3+(YAG) 중공 입자를 합성하였다. 열처리 온도에 따른 고분해능 투과 전자 현미경(HRTEM), X-선 회절(XRD), 고분해능 에너지 분광법(HREDX) 분석결과, 중공 YAG: Ce3+입자는 Kirkendall 효과에 의해 형성됨을 확인하였다. 전계방사형 주사 전자 현미경(FE-SEM) 측정을 통해, 열처리 후에도 입자의 크기와 형태가 균일함을 확인하였으며, 공초점 현미경 관찰을 통해 중공 형태를 명확히 확인 할 수 있었다. Photoluminescence (PL) 분광법과 형광 수명 이미징 현미경(FLIM)을 이용한 광 특성 분석결과, 합성된 입자는 400-500 nm에서 흡수 파장 (456 nm에서 최대 강도)과 500-700 nm 범위의 발광 파장(544 nm에서 최대 강도)을 나타냈고, 상용 YAG: Ce3+(70 ns)에 준하는 74 ns의 잔광 시간(decay time)이 측정되었다. 단분산 수화 알루미늄 입자의 크기를 조절하여 최종 합성된 YAG: Ce3+의 크기를 조절할 수 있었다. 지름 약 600 nm의 Al(OH)3를 사용한 경우, $1,300^{\circ}C$에서 열처리를 한 후 평균 지름 590 nm의 중공입자를 합성하였고, 약 170 nm의 Al(OH)3를 이용하여, 더 낮은 온도인 $1,100^{\circ}C$에서의 열처리를 통해 평균지름 140 nm의 중공 YAG: Ce3+입자를 합성하였다. 본 연구를 통하여 합성된 균일한 크기의 YAG 중공입자는 LED와 같은 광전변환 소자 및 다기능성 바이오 이미징 등의 나노바이오 소자 분야에 활용될 수 있음이 기대된다.