• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.1
• /
• pp.40-47
• /
• 2022

In this study, the direction of the steel fibers mixed in the normal mortar and the steel slag mortar was arranged in the circumferential direction by using an electromagnetic field, and a double punch test was performed to evaluate the effect of magnetic filed exposure on tensile strength and on fracture energy. As a result of the experiment, it was confirmed that it is possible to arrange the steel fibers in the circumferential direction. Tensile strength and displacement at failure were also increased according to the arrangement of steel fibers due to exposure to electromagnetic fields. On the other hand, the fracture energy hardly increased. It is considered that there was a limit in resisting crack growth because the area where the arrangement of steel fibers could be adjusted under the electromagnetic field was not deep to center of specimen and the end shape of the steel fibers were straight not hooked. Additional research is needed to address these issues.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.749-754
• /
• 2022

High adhesion and water resistance of the skin surface are required for wearable and skin-attachable electronic patches in various medical applications. In this study, we report a stretchable electronic patch that mimics the drainable structure pattern of the hexagonal channels of frog's pads and the sucker of an octopus based on carbon-based conductive polymer composite materials. The hexagonal channel structure that mimics the pads of frogs drains water and improves adhesion through crack arresting effect, and the suction structure that mimics an octopus sucker shows high adhesion on wet surfaces. In addition, the high-adhesive electronic patch has excellent adhesion to various surfaces such as silicone wafer (max. 4.06 N/cm²) and skin replica surface (max. 1.84 N/cm²) in dry and wet conditions. The high skin-adhesive electronic patch made of a polymer composite material based on a polymer matrix and carbon particles can reliably detect electrocardiogram (ECG) in dry and humid environments. The proposed electronic patch presents potential applications for wearable and skin-attachable electronic devices for detecting various biosignals.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.6 s.58
• /
• pp.88-96
• /
• 2009

In this Study, FR-ECC(Fire Resistance Engineered Cementitious Composites) in which at same time it can improve the endurance and fire-resistance efficiency of a Structure was developed, and the experimental study such as thermal characteristic, Fire-resistance efficiency, and etc was performed for using FR-ECC as the repair materials for building and civil Structure. Moreover, it was evaluated about the field applicability of FR-ECC. As a result, FR-ECC is superior to the existence fire resistance repair mortar in strength and durability property. Also, FR-ECC was exposed to have the characteristic of being excellent than existence fire resistance mortar in the field applicability.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.98-105
• /
• 2017

In this study, the fiber blending ratio and strain rate effect on the tensile behavior of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber and polyvinyl alcohol fiber were used for reinforcing fiber. The fiber blending ratio of HSF+PVA were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, the tensile strength, strain capacity and fracture toughness of the hooked steel fiber reinforced cement composites were improved by the increase of the bond strength of the fiber and the matrix according to increase of strain rate. However, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by micro cracks in the matrix around hooked steel fiber. On the other hand, PVA fiber showed cut-off fracture at strain rate $10^{-6}/s$ with multiple cracks. However, at the strain rate $10^1/s$, the multiple cracks and strain capacity were decreased because of the pull-out fracture of PVA fiber. The HSF1.5PVA0.5 shown the highest tensile strength because the PVA fiber suppressed the micro cracks in the matrix around the hooked steel fiber and improved the pull-out resistance of hooked steel fiber. Thus, DIF of strain capacity and fracture toughness of HSF1.5PVA were greatly improved. In addition, the synergistic response of fracture toughness was positive because the tensile stress was slowly decreased after the peak stress by improvement of the pull-out resistance of hooked steel fiber at strain rate $10^1/s$.

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.237-242
• /
• 2015

The use of calcite-forming bacteria (CFB) in crack remediation and durability improvements in construction materials creates a permanent and environmentally-friendly material. Therefore, research into this type of application is stimulating interdisciplinary studies between microbiology and architectural engineering. However, the mechanisms giving rise to these materials are dependent on calcite precipitation by the metabolism of the CFB, which raises concerns about possible hazards to cement-based construction due to microbial metabolic acid production. The aim of this study was to determine target microorganisms that possibly can have bio-corrosive effects on cement mortar and to assess multi-functional CFBs for their safe application to cement structures. The chalky test was first used to evaluate the $CaCO_3$ solubilization feature of construction sites by fungi, yeast, bacterial strains. Not all bacterial strains are able to solubilize $CaCO_3$, but C. sphaerospermum KNUC253 or P. prolifica KNUC263 showed $CaCO_3$ solubilization activity. Therefore, these two strains were identified as target microorganisms that require control in cement structures. The registered patented strains Bacillus aryabhatti KNUC205, Arthrobacter nicotianae KNUC2100, B. thuringiensis KNUC2103 and Stenotrophomonas maltophilia KNUC2106, reported as multifunctional CFB (fungal growth inhibition, crack remediation, and water permeability reduction of cement surfaces) and isolated from Dokdo or construction site were unable to solubilize $CaCO_3$. Notably, B. aryabhatti KNUC205 and A. nicotianae KNUC2100 could not hydrolyze cellulose or protein, which can be the major constituent macromolecules of internal materials for buildings. These results show that several reported multi-functional CFB can be applied to cement structures or diverse building environments without corrosive or bio-deteriorative risks.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.771-780
• /
• 2014

In this study, the various organic supports (i.e., silicone, acrylonitrile-butadiene-styrene, epoxy, and, butadiene rubber) with great sorption capacity of organic contaminants were chosen to develop nano-ZnO/organic composites (NZOCs) and to prevent the detachment of nano-ZnO particles. The water resistance of the developed NZOCs were evaluated, and the feasibility of the developed NZOCs were investigated by evaluating the removal efficiency of 1,1,2-trichloroethylene (TCE) in the aqueous phase. Based on the results from water-resistance experiments, long-term water treatment usage of all NZOCs was found to be feasible. According to the FE-SEM, EDX, and imaging analysis, nano-ZnO/butadiene rubber composite (NZBC) with various sizes and types of porosity and crack was measured to be coated with relatively homogeneously-distributed nano-ZnO particles whereas nano-ZnO/silicone composite (NZSC), nano-ZnO/ABS composite (NZAC), and nano-ZnO/epoxy composite (NZEC) with poorly-developed porosity and crack were measured to be coated with relatively heterogeneously-distributed nano-ZnO particles. The sorption capacity of NZBC was close to 60% relative to the initial concentration, and this result was mainly attributed to the amorphous structure of NZBC, hence the hydrophobic partitioning of TCE to the amorphous structure of NZBC intensively occurred. The removal efficiency of TCE in aqueous phase using NZBC was close to 99% relative to the initial concentration, and the removal efficiency of TCE was improved as the amount of NZBC increased. These results stemmed from the synergistic mechanisms with great sorption capability of butadiene rubber and superior photocatalytic activities of nano-ZnO. Finally, the removal efficiency of TCE in aqueous phase using NZBC was well represented by linear model ($R^2{\geq}0.936$), and the $K_{app}$ values of NZBC were from 2.64 to 3.85 times greater than those of $K_{photolysis}$, indicating that butadiene rubber was found to be the suitable organic supporting materials with enhanced sorption capacity and without inhibition of photocatalytic activities of nano-ZnO.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2009.12a
• /
• pp.287-287
• /
• 2009

우리나라의 시설재배면적은 51,237ha에 이르며 수경재배 면적을 제외하면 대부분 경운재배를 하고 있는 실정이다. 경운 작업은 대형 농기구를 이용하여 경운하기 때문에 시설내 토양 입자가 단립으로 잘게 부서지며 대형농기구로 인하여 토양이 답압되고 경운층 아래 경반층이 형성되어 뿌리 발육과 배수 불량의 원인을 제공하게 된다. 경운은 기존에 설치되어 있는 관수시설과 지주, 멀칭을 제거한 후 유기물을 투입하고 2~3회 경운작업 후 다시 소형농기구를 이용하여 이랑을 조성한다. 그리고 제거된 관수시설, 멀칭, 지주를 다시 설치하여야 하기 때문에 시설의 경운재배는 가장 고통스러운 악성노동을 수반하게 된다. 따라서 본 시험에서는 시설 고추 유기재배 시 무경운재배 효과에 대하여 검토하고자 전남 나주시 남평읍 평산리 "JD 중동통 미사질양토"에서 시험을 수행하였다. 2009년 3월 11일 "녹광" 고추 품종을 재식 거리 135${\times}$38cm로 정식하여 7월 27일까지 재배한 후, 시험포를 1/2로 나누어 트렉터를 이용하여 경운작업을 실시하고 2009년 8월 1일 억제작형으로 "녹광" 고추 품종을 정식하였다. 그리고 나머지 시험포 1/2은 전작물을 재배한 이랑에 경운작업을 생략하고 전작물 고추의 식물체는 지제부를 절단하여 분해되도록 고랑을 피복하였으며, 고추 포기와 포기 사이에 무경운으로 고추를 정식하여 시험을 수행하였다. 고추 정식 전 7월 30일에 경운 시험포에 10a당 29톤의 물을 관수하였으며, 무경운 시험포에는 10a당 48톤의 물을 관수하고, 관수 2일 후 시험포의 습도와 이랑에 발생되는 균열수를 조사하였다. 이랑의 수분함량은 표토 0.23%, 토양 30cm 깊이의 수분함량은 0.18%로 경운방법에 따라서 차이가 없었으나 토양 20cm 깊이의 수분함량은 경운은 0.25%, 무경운은 0.14%로 경운재배 토양에 비하여 뿌리의 주요 분포지역인 작토층의 수분함량이 44% 정도 낮았다. 그리고 경운재배 이랑에서는 7~35cm 정도 되는 균열이 m당 22개정도 발생되었으나 무경운에서는 관찰되지 않았다. 시설 토양의 생물다양성 지표가 되는 미소동물의 분포를 조사한(9월 16일) 결과 경운재배 토양에서는 보리톡톡기 등 8종 97개체가, 무경운 토양에서는 10종 101개체가 포획되었다. 경운 방법에 따른 시설 유기재배 고추의 수확과수는 주당 139~141과, 수량은 1,367~1,431g/주가 수확되고 10a당 수량은 경운재배가 2,790kg, 무경운재배는 2,666kg이 생산되어 경운방법에 따른 수량 차는 인정되지 않았다. 경운방법에 따른 경영비를 분석한 결과 무경운은 경운재배에 비하여 10a당 유기질 비료비 178천원, 대농구상각비 211천원, 노력비 261천원의 절감으로 경운재배 경영비 4,815천원/10a 대비 약 14%의 경영비가 절감되었다. 그리고 작기마다 반복되는 경운작업과 관수시설, 멀칭, 지주설치 작업을 1회 설치 작업으로 연속사용이 가능하여 시설재배에서 가장 고통스러운 악성노동의 회피가 가능하였다.

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.95-101
• /
• 2003

Drying shrinkage cracking which may be caused by the relatively large specific surface is a matter of grave concern for latex modified concrete(LMC) overlay and rapid-setting cement latex modified concrete(RSLMC) overlay. LMC and RSLMC were studied for field applications very actively in terms of strength and durability in Korea. However, there were no considerations in drying shrinkage. Therefore, the purpose of this dissertation was to study the drying shrinkage properties of LMC and RSLMC with the main experimental variables such as cement types(ordinary portland cement, rapid setting cement), latex contents(0, 5, 10, 15, 20%) and curing days at a same controlled environment of 60% of relative humidity and $20^{\circ}C$ of temperature. The drying shrinkage for specimens was measured with a digital dial gauge of Demec. The test results showed that the drying shrinkage of LMC and RSLMC were considerably lower than that of OPC and RSC, respectively. This might be attributed to the interlocking of hydrated cement and aggregates by a film of latex particles, water retention due to hydrophobic, and colloidal properties of the latexes resulting in reduced water evaporation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.87-104
• /
• 1989

Recently, with the tendency of more lightening, high-strength and high-speed in the marine industries such as marine structures, ships and chemical plants, the use of the aluminium Alloy is rapidly enlarge and there occurs much interest in the study of corrosion fatigue crack characteristics. In this paper, the initiation of surface crack and the propagation characteristics on the base metal and weld zone of 5086-H116 Aluminium Alloy Plate which is one of the Al-Mg serious alloy(A5000serious) used most when building the special vessels, were investigated by the plane bending corrosion fatigue under the environments of marine, air and applying cathodic protection. The effects of various specific resistances on the initiation, propagation behavior of corrosion fatigue crack and corrosion fatigue life in the base metal and heat affected zone were examined and its corrosion sensitivity was quantitatively obtained. The effects of corrosion on the crack depth in relation to the uniform surface crack length were also investigated. Also, the structural, mechanical and electro-chemical characteristics of the metal at the weld zone were inspected to verify the reasons of crack propagation behavior in the corrosion fatigue fracture. In addition, the effect of cathodic protection in the fracture surface of weld zone was examined fractographically by Scanning Electron Microscope(S.E.M.). The main results obtained are as follows; (1) The initial corrosion fatigue crack sensitibity under specific resistance of 25Ω.cm% show 2.22 in the base metal and 19.6 in the HEZ, and the sensitivity decreases as specific resistance increases (2) By removing reinforcement of weldment, the initiation and propagation of corrosion crack in the HAZ are delayed, and corrosion fatigue life increases. (3) As specific resistance decreases, the sensitivity difference of corrosion fatigue life in the base metal and HAZ is more susceptible than that of intial corrosion fatigue crack. (4) Experimental constant, m(Paris' rule) in the marine environment is in the range of about 3.69 to 4.26, and as specific resistance increases, thje magnitude of experimental constant, also increases and the effect by corrosion decreases. (5) Comparing surface crack length with crack depth, the crack depth toward the thickness of specimen in air is more deeply propagated than that in corrosion environment. (6) The propagation particulars of corrosion fatigue crack for HAZ under initial stress intensity factor range of $\Delta$k sub(li) =27.2kgf.mm super(-3/2) and stress ratio of R=0 shows the retardative phenomenon of crack propagation by the plastic deformation at crack tip. (7) Number of stress cycles to corrosion fatigue crack initiation of the base metal and the welding heat affected zone are delayed by the cathodic protection under the natural sea water. The cathodic protection effect for corrosion fatigue crack initiation is eminent when the protection potential is -1100 mV(SCE). (8) When the protection potential E=-1100 mV(SCE), the corrosion fatigue crack propagation of welding heat affected zone is more rapid than that of the case without protection, because of the microfissure caused by welding heat cycle.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.415-420
• /
• 2013

A method for coating rice with a novel substance, SHC [soybean hydrolysate with Cyclo Histidine-Proline (CHP)], was developed to produce functional rice for food production. The dip coating and spray coating method was tested to reduce the loss of functionality during the manufacturing of enriched rice. The dip coating method showed a very low absorption rate ($0.079min^{-1}$) of the functional substance compared to control ($0.150min^{-1}$), while the spray-coating method with protective coating materials [a methyl cellulose solution (l%, w/v) containing 5% (w/v) of the SHC] showed relatively adequate absorption characteristics. A light yellowish stain was observed in the rice samples processed by the spray-coating method (b value; surface1 0.69, flour 4.91) compared to raw rice (b value; surface 9.67, flour 4.86). The microscopic appearance of whole kernels and longitudinal sections revealed that cracks formed in all rice samples, regardless of the coating method. In conclusion, spray coating is a potential method for producing SHC-fortified rice with excellent physical characteristics.