• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.3
• /
• pp.309-316
• /
• 2015

A state-based peridynamic model is able to describe a general constitutive model from the standard continuum theory. The response of a material at a point is dependent on the deformation of all bonds connected to the point within the nonlocal horizon region. Therefore, the state-based peridynamic model permits both the volume and shear changes of the material which is promising to reproduce the complicated dynamic brittle fracture phenomena, such as crack branching, secondary cracks, cascade cracks, crack coalescence, etc. In this paper, the two-dimensional state-based peridynamic model for a linear elastic plane stress solid is employed. The damage model incorporates the energy release rate and the peridynamic energy potential. For brittle glass materials, the impact of the crack-parallel compressive stress waves on the crack branching pattern is investigated. The peridynamic solution for this problem captures the main features, observed experimentally, of dynamic crack propagation and branching. Cascade cracks under strong tensile loading and secondary cracks are also well reproduced with the state-based peridynamic simulations.

• CORROSION AND PROTECTION
• /
• v.12 no.1
• /
• pp.1-11
• /
• 2013

Alloy 600 재료의 PWSCC의 개념을 소개하고 그 발생과 전파에 미치는 미세조직, 온도, 응력, 수화학 환경등의 주요인자를 정리하였다. ◯ PWSCC란 니켈 기지 합금인 Alloy 600와 그 용접재인 Alloy 82/182 재료가 원자로 1차수 환경에서 보이는 응력부식균열을 의미한다. ◯ Alloy 600의 PWSCC에 미치는 주요 인자에는 재료의 미세조직, 응력, 온도, 환경등이 있으며 그 중에서 재료의 미세조직이 가장 지배적인 인자이다. ◯ 재료내의 탄화물은 탄소 함량과 열처리 조건에 따라 달리 형성되며 입계를 따라 준연속적으로 잘 발달된 입계탄화물을 가지는 재료가 PWSCC에 저항성을 가진다. ◯ 손상속도는 부가 응력의 네 제곱에 비례하여 증가하는 것으로 알려져 있다. ◯ PWSCC는 Arrhenius 관계의 열활성화 과정(thermally activated process)이다. ◯ 용존수소량에 따라 재료의 부식전위가 정해지는데 전극전위가 Ni/NiO 평형전위 부근에서 가장 큰 균열 성장 민감도를 보인다는 데는 연구자들 사이에 이견이 없다. 그러나 균열의 개시에 대한 용존수소량의 영향에 대해서는 이견이 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.117-117
• /
• 2004

일반적으로 접촉 피로 마멸은 구름 또는 미끄럼 접촉시 작용하는 반복 응력에 의해 표면과 표면 아래에 균열이 형성되고 성장 및 합체의 과정을 거쳐 표면의 일부가 떨어져 나가는 손상으로 기어나 캠-롤러, 구름 베어링과 같이 구름-미끄럼 접촉상태로 운전하는 기계요소에서 가장 중요하게 고려되어야 할 파손 메커니즘이다. 특히 기어나 구름 베어링 같이 고주기 접촉 피로 특성을 지니는 기계요소의 수명은 피로수명 실험과 통계적 기법을 이용한 Weibull 이론을 기초로 한 수명식을 대부분 사용하고 있다.(중략)

• Journal of the KSME
• /
• v.32 no.1
• /
• pp.4-17
• /
• 1992

이 글에서는 복합적층판의 역학적 특성인 층간분리, 모재균열, 초기파손 후의 거동에 대한 문헌을 간단히 서술하고 그 특성을 살펴 보았다. 이상에서 살펴본 바와 같이 이방성인 층으로 구성된 복합적층 구조의 역학적 특성은 균질인 단일구조와 달리 각층의 재료상수가 달라층과 층 사이의 층간응력이 존재하여 층간분리현상이 발생하지 않도록 섬유방향뿐만 아니라 적층순서를 중요한 설계변수로 고려하여야 한다. 또한 모재균열로 인한 기계적 거동의 변화를 이해하고 초기파손 후의 손상을 고려한 해석을 수행하여 복합적층 구조의 응력해석 및 파손, 강도예측을 한다.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.3
• /
• pp.147-155
• /
• 1996

In this study a model for the constitutive relation of a plane concrete is proposed using a micromechariical model. In this model a precursor crack is assumed to exist in the aggregate-cement paste interface, and the LEFM is used to predict the nucleation of the bond cracks and the grow th of mortar cracks. For computational convenience the bond crack-mortar crack configuration is transformed into a straight crack with a point force in the middle. 'The overall compliance and the cons,titutive relation are predicted from the damage due to microcracks, and the predicted stress-strain curves are compared with some experimental data. According to the results, the model predictions are better for under tensile loading than under compression, for high, strength concrete than for normal strength concrete.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.93-101
• /
• 2022

RC Slab bridges in Korea account for more than 70% of the total bridges for more than 20 years of service. As the number of aging structures increases, the importance of safety diagnosis and maintenance of structures increases. For highway bridges, cracks are a main cause of deck deterioration, which is very closely related to the decrease in bridge durability and service life. In addition, the damage rate of expansion joints and bearings accounts for approximately 73% higher than that of major members. Therefore, this study defined damage scenarios combined with devices damages and deck deterioration. The stress distribution and maximum stress on the deck were then evaluated using design vehicle load and daily temperature gradient for single and combined damage scenarios. Furthermore, this study performed damage-spread analysis and predicted condition ratings according to a deck deterioration model generated from the inspection and diagnosis history data of cracks. The heterogeneous damages combined with the member damages of expansion joints and bearings increased the rate of crack area and damage spread, which accelerated the time to reach the condition rating of C. Therefore, damage to bridge members requires proper and prompt repair and replacement, and otherwise it can cause the damage to bridge deck and the spread of the damage.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.1
• /
• pp.51-58
• /
• 2008

A constitutive model based on a combination of a micromechanics-based weakened interface elastic model (Lee and Pyo, 2007) and a crack nucleation model (Karihaloo and Fu, 1989) is proposed to predict the effective elastic behavior of particle-reinforced composites. The model specifically considers imperfect interfaces in particles and microcracks in the matrix. To exercise the proposed constitutive model and to investigate the influence of model parameters on the behavior of the composites, numerical simulations on uniaxial tension tests were conducted. Furthermore, the present prediction is compared with available experimental data in the literature to verify the accuracy of the proposed constitutive model.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.1
• /
• pp.54-61
• /
• 2000

In order to determine the mode I stress intensity factor ($K_I$) by means of the alternating current potential drop(ACPD) technique, the change in potential drop due to load for a paramagnetic material containing a two-dimensional surface crack was examined. The cause of the change in potential drop and the effects of the magnetic flux and the demagnetization on the change in potential drop were clarified by using the measuring systems with and without removing the magnetic flux from the circumference of the specimen. The change in potential drop was linearly decreased with increasing the tensile load and was caused by the change in conductivity near the crack tip. The reason of decreasing the change in potential drop with increasing the tensile load was that the increase of the conductivity near the crack tip due to the tensile load caused the decreases of the resistance and internal inductance of the specimen. The relationship between the change in potential drop and the change in $K_I$ was not affected by demagnetization and was independent of the crack length.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.229-238
• /
• 1997

Mechanical behavior of asphalt concrete that accounts for viscoelasticity and damage evolution under cyclic loading conditions is modeled and presented in this paper. An elastic-viscoelastic correspondence principle in terms of pseudo variables is applied to separately evaluate viscoelasticity and time-dependent damage growth in asphalt concrete. A microcrack growth law, which is commonly employed in linear viscoelastic fracture mechanics, is successfully used for describing the damage growth in the body. A constitutive equation in terms of stress and pseudo strain is first established for controlled-strain mode, and then transformed to controlled-stress constitutive equation by simply replacing stress and pseudo strain with pseudo stress and strain. The transformed constitutive equation in terms of pseudo stress satisfactorily predicts the mechanical behavior of asphalt concrete all the way up to failure under controlled-stress modes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.129-136
• /
• 2018

The estimation of the fatigue design life for large welded structures is usually performed using the liner cumulative damage method such as Palmgren-Miner rule or the equivalent damage method. When a fatigue crack is detected in a welded steel structure, the residual service life has to be estimated base on S-N curve method and liner elastic fracture mechanics. In this study, to examine the 3D fatigue crack behavior and estimate the fatigue life of out-of-plane gusset fillet welded joint, the fatigue tests were carried out on the model specimens. Investigations of three-dimensional fatigue crack propagation on gusset welded joint was used the finite element analysis of FEMAP with NX NASTRAN and FRANC3D. Fatigue crack growth analysis was carried out to demonstrate the effects of aspect ratio, initial crack length and stress ratio on out-of-plane gusset welded joints. In addition, the crack behaviors of fatigue tests were compared with those of the 3D crack propagation analysis in terms of changes in crack length and aspect ratio. From this analysis result, SIFs behaviors and crack propagation rate of gusset welded joint were shown to be similar fatigue test results and the fatigue life can also be predicted.