• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.77-82
• /
• 2004

This study presents reliability assessment of merchant ships with focus on hull girder ultimate limit state, taking into account the time-dependent effects of corrosion, fatigue cracking and local denting. Some considerations for establishing a reliability-based repair and maintenance scheme are also made so as to keep a ship's hull girder strength reliability at an acceptable level even later in life.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.27-35
• /
• 2015

The material properties of crack growth models at an elevated temperature were derived from the results of numerous crack growth tests for Mod.9Cr-1Mo (ASME Grade 91) steel specimens under fatigue loading and creep loading at an elevated temperature. These crack growth models were needed for defect assessment under creep-fatigue loading. The mathematical crack growth rate models for fatigue crack growth (FCG) and creep crack growth (CCG) were determined based on the test results, and the models were compared with those of the French design code RCC-MRx to investigate the conservatism of the code. The French design code RCC-MRx provides an FCG model and a CCG model for Grade 91 steel in Section III Tome 6. It was shown that the FCG model of RCC-MRx is conservative, while the CCG model is non-conservative compared with the present test data. Thus, it was shown that further validation of the property was required. Mechanical strength tests and creep tests were also conducted, and the test results were compared with those of RCC-MRx.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.493-498
• /
• 2011

구름접촉피로는 차륜과 레일의 반복적인 접촉으로 인하여 발생하는 표면손상현상으로 점차 증가하는 레일손상 중 하나이다. 접촉마모 및 주기적 그라인딩보다 균열의 성장속도가 더 빨라 균열진전이 시작되는 최소균열크기(minimum crack size for growth)는 레일의 파괴방지 및 유효한 유지보수전략을 수립하는데 기초자료로 활용된다. 본 연구에서는 최소균열크기를 예측하기 위하여 차륜레일의 접촉에 영향을 미치는 주요 파라미터를 변화시키면서 최소균열크기의 변화를 살펴보았다. 이를 위하여 Fletcher와 Kapoor의 "2.5D"모델을 적용한 시뮬레이션 소프트웨어를 개발하였으며, 최대접촉하중(1174MPa), 표면마찰계수(0.1, 0.2, 0.3 and 0.4), 잔류응력, 접촉에 의한 표면마모(1.0nm/cycle), 그라인딩량(0.3mm/10MGT)을 파라미터로 하여 해석을 수행하였다. 해석결과 최소균열크기는 해석조건에 따라 1.41-1.95mm로 계산되었다.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.126-135
• /
• 1998

도로보수는 매우 고가의 사업으로서 정확한 분석이 필수적이라 할 수 있다. 따라서 본 연구에서는 수많은 대상구간의 도로파손에 대한 보수방법 및 보수우선순위를 정확하고 신속하게 결정하기 위해서 유전자 알고리즘(Genetic Algorithms)을 이용한 도로보수방법론을 개발하였다. 본 연구에서는 유전자 알고리즘의 주 분석기법인 교배연산, 돌연변이연산, 복제연산, 룰렛휠기법, 적합도함수등을 이용하였으며, 균열, 바퀴자국, 부스러짐, 플러쉬등의 4개 파손상태와 실코트, 덧씌우기, 팻칭, 재포장등의 4개 보수방법만을 분석대상으로 하였다. 또한 적합도의 판정을 위해서 각 구간의 보수효과, 자원요구량, 자원제약량을 이용하였으며, 이를 통해서 적절한 보수방법 및 보수우선순위를 결정하였다.

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.659-666
• /
• 2004

In this study, for the establishment of the performance evaluation methods and the quality control standard of durability recovery method, the quantitative exposure data by long term exposure test under the coast and air environment is accumulated and analyzed. Investigating and evaluating the result of exposure test during 18 months of exposure age under the coastal and normal atmosphere environment, micro crack, swelling and spatting of surface coating material crack of repair standards of repair material and method through continuous exposure test in the future.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.649-655
• /
• 2013

During welding, the dissimilar metal butt welds of nuclear piping are typically subjected to repair welding in order to eliminate defects that are found during post-weld inspection. It has been found that the repair weld can significantly increase the tensile residual stress in the weldment, and therefore, accurate estimation of the weld residual stress due to repair weld, especially for dissimilar metal welds using Ni-based alloy 82/182 in nuclear components, is of great importance in order to assess susceptibility to primary water stress corrosion cracking. In the present study, the stress distributions of dissimilar metal butt welds in nuclear reactor piping subjected to repair weld were investigated based on detailed nonlinear finite element analyses. Particular emphasis was placed on the variation of the stress distribution in the dissimilar metal butt weld according to the finite element welding analysis sequence for the repair welding process.

• Magazine of RCR
• /
• v.13 no.1
• /
• pp.36-41
• /
• 2018

• 한국도로학회지:도로
• /
• v.16 no.3
• /
• pp.54-63
• /
• 2014

최근 터널에서 균열, 누수 등과 같은 현상이 많이 발생하고 있어 터널의 안정성 및 균열보수, 미관, 고객의 공용 중 심리적 불안감을 조성한다는 것을 쉽게 찾을 수 있다. 고속국도 제30호선 상주~안동간은 16개소/12km의 터널이 설계되어 있어 터널의 비중이 크다. 그러므로 본 연구에서는 터널 라이닝 균열발생 원인분석 및 기존사례 조사를 통하여 균열발생 최소화 방안을 검토 및 터널 라이닝의 유해한 균열방지를 위하여 공사관계자(발주처, 감리사, 시공사, 하도급사 등) 의견수렴을 통한 여러 가지 대책공법을 제안하였으며 제안공법의 효율성을 판단하기 위해 고속국도 제30호선 상주~안동간 제 8공구의 단촌 2터널, 단촌 3터널에 시험시공을 실시하여 각 공법별 균열율 및 시공성, 경제성을 고려하여 결과를 분석하고 최적의 공법을 파악, 전파하는데 그 목적이 있다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.322-329
• /
• 2016

This study is about the method to control the quality of material used to repair leakage and crack of concrete structure and suggests the "Temperature Stability Test Method" as a follow-up study. In the result of performance evaluation for 45 samples of 15 types in 5 series, the temperature stability test showed different material changes including rolling down, volume change, and color change as they are frozen and melt repeatedly in the somewhat extreme conditions at low($-20^{\circ}C$) and high($60^{\circ}C$) temperatures, where 13 samples (approx. 29%) and 32 samples (approx. 71%) showed leakage, respectively, in the permeability test to evaluate leakage. This result shows the enough importance of setting the quality control criteria of leakage repair material currently used to maintain concrete structures considering the temperature conditions, and proves the applicability of the Temperature Stability Test Method as a standard test method to ensure long-term durability of concrete structure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.115-124
• /
• 1987

Stop-hole method is one of the conventional methods for the temporary repair or reinforcement of the member in the case that the structural steel member has a fatigue crack. In this study, the stop-hole method. have been estimated quantitatively in terms of survival life time of the side edge cracked specimen. For this purpose, fatigue tests have been performed on the test specimens and the fatigue crack growth rates of the structural steel (SS41) members have been measured under load of constant amplitude. The results of this experiment show that it is desirable to use the stop-hole method before the crack reaches the region of elasto-plastic behaviour.