• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.93.2-93.2
• /
• 2015

플라즈마를 포함한 반응성 가스 공정 분석용 사중극자 질량분석기의 필라멘트의 파손양상을 조사하였다. 또한 유전체 증착층이 이온원 성능에 미치는 영향을 분석하기 위하여 이온원의 일반적인 가동 전압 조건에서 Poisson방정식을 이용하여 전위를 수치 해석으로 구하였다. 사용중 파손된 필라멘트의 파단면을 주사전자현미경으로 관찰결과, 수직으로 절단되는 양상과 직경이 점차 작아지면서 erosion되는 두가지 양상을 보였다. 또한 파단면은 표면균열과 패시팅(faceting) 현상을 보였다. 필라멘트 사용시 가장 큰 문제는 패시팅(faceting)이다. 대부분의 결정에서는 다른 결정면보다 에너지 준위가 낮은 결정면이 존재한다. W 원자는 고온에서 확산 또는 증발하여 표면에서 다시 응축할 때 표면 에너지를 최소화하기 위한 독특한 평형 형상이 만들어 지는데 이것이 패시팅의 구동력이다. 이때 국부적으로 단면적이 감소하는 곳이 생기는데, 이 지점이 집중적으로 가열되고 증발이 가속화하여 파손된다. 파단면을 EDS 분석결과, 산화물을 포함한 F, Fe 및 C이 검출되었다. 이 F과 C는 공정중 사용된 CF4의 분해에 의한 것으로 생각되며, 파손된 필라멘트를 Ar 유도결합 플라즈마로 처리한 결과 이 F, Fe 및 C의 양이 감소하였다.

• Journal of Welding and Joining
• /
• v.7 no.1
• /
• pp.17-27
• /
• 1989

용접에 이와 같이 발생하는 용접잔류응력과 변형은 용접구조물의 제작시 여러 가지 장해를 유발 할 뿐만 아니고 그 구조물의 사용중에 있어서도 파괴의 발생 또는 파괴의 전파에 직.간접적으로 기여하여 악영향을 끼치게 된다. 용접잔류응력은 용접구조물의 피로감도를 저하시키거나, 취성균 열 및 응력부식균열의 진전을 용이하게 하며 용접변형은 구조물의 외관을 해치거나 국부적으로 스트레인집중을 초래하여 이 역시 취성파괴의 원인으로 작용하여 구조물의 파괴사고를 유발할 위험성을 내포하고 있다. 따라서 용접변형과 잔류응력을 극도화하기 위한 대책은 용접기술자로 서 용접시공시 유의해야 할 가장 큰 사항의 하나라고 할 수 있다. 보고에서는 이러한 용접변형 과 잔류응력현상에 대해 그 발생기구를 금속학적 측면에서 고찰하고 그 경감대책에 대해서는 구 조물의 형상이나 종류에 따라 각각별개의 대책이 수립되어야 하나 여기서는 보편적인 경우에 한 해 해설하고저 한다.

• Journal of Korea Foundry Society
• /
• v.28 no.5
• /
• pp.199-203
• /
• 2008

현재 사용되고 있는 진동감쇠능 Mg-Zr 합금인 K1A는 우수한 진동감쇠능을 갖으나 열악한 기계적 특성과 Zr이 고가이면서 고융점 원소로 합금화가 어렵다는 문제점 때문에 진동테이블, 미사일 유도시스템 및 레코딩 장비 등에 소량만 적용되고 있다. Mg-Ni 합금의 경우Ni가 Mg 용탕 내에 고용되지 않아 우수한 진동감쇠능을 갖으나 Fe, Cu등과 함께 Mg의 부식을 가속시키는 원소로 사용이 제한적일 뿐 아니라 Zr과 마찬가지로 Ni도 고융점 원소로 합금화가 어렵다는 것도 문제점으로 작용하고 있다. Mg-Si 합금의 경우 Si이 극소량만 고용되어 우수한 진동감쇠능을 보이며 Ni과 달리 부식에 영향을 받지 않는 원소이지만 Zr, Ni와 마찬가지로 고가이면서 고융점 원소로 합금화가 어렵다는 문제점이 있다. Mg 용탕에 첨가하게 되면 용탕의 표면에 MgO, CaO 피막을 형성하여 발화현상을 억제할 뿐 아리라 첨가량의 증가에 따라 발화온도를 상승시키는 Ca의 경우 Mg 내에 고용되어 진동감쇠능을 감소시킬 뿐 아니라 유동성 저하 및 열간균열을 야기하는 것으로 나타났다. 그러나 CaO의 경우 Mg내에 고용되지 않고, 가격이 저렴하며 Mg 고유 특성의 변화가 적다. 또한 Ca와 같이 Mg 용탕의 발화를 억제하여 보호가스인 $SF_6$를 사용하지 않아도 된다. 이런 다양한 장점을 갖는 CaO를 첨가한 Mg합금이 진동감쇠능을 유지하면서 기계적 특성이 향상된다면 주행 시 안전성 및 정음성이 요구되는 수송기기 분야와 외부충격으로부터 데이터 보호가 필수적인 휴대용 전자정보통신기기 분야에서 적용이 증가할 전망이며 이에 따라 이 분야에 대한 지속적인 연구와 투자가 이루어져야 할 것이다.

• Journal of the Korean Institute of Gas
• /
• v.3 no.3 s.8
• /
• pp.45-50
• /
• 1999

The LPG refueling station's explosion at Bucheon city was a major accident which with rare frequency of occurrence and large damage effect. Therefore, to prevent similar accident in the future from LPG charging stations which located in urban area. It needs to identify the damage effects of such facilities by comparing theoretically quantities risk and actual damage. The BLEVE effects from the accident showed similar damage effect in case of heat flux, however, the overpressure level reflected at the reduced distance by $15\%$. The structure damage to the near by area showed comparatively large heat radiation damage to the concrete structure strength and shape changes through heat flux while the overpressure effect was small.

• Journal of the Korea Concrete Institute
• /
• v.25 no.4
• /
• pp.447-455
• /
• 2013

In this study, reinforced concrete slabs with steps were experimentally studied to analyze their structural performance and to suggest reinforcing details in the step. Because the stepped slabs may behave very poorly in terms of bending strength, stiffness, deflection, cracking, etc., the study is aimed to suggest proper reinforcing details such that the same bending strength is obtained as that without steps. The bending strengths of 12 test specimens with a variety of different reinforcing detail types or other parameters were compared with each other. The specimen without any additional reinforcement in the step had a very low bending strength and significant damage, and the specimens with diagonal reinforcements in the step showed substantial early cracks, experienced hinging of the step, and had a substantial loss of the bending strength. In contrast, the specimens with a combination of U-bars, reversed U-bars, L-bars, and reversed L-bars performed very well and almost reached to 100% of the slab bending strength. The U-bars and reversed U-bars were effective in controling the diagonal cracks, while the L-bars and reversed L-bars were effective in preventing from yielding of slab reinforcement near the step.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.5
• /
• pp.172-178
• /
• 1995

Concrete contains numerous microcracks at initially poured. The growth and propagation of nicrockacsk are believed tc finally incur the faiure of concrete. These processings are understood as a damage. Damage IS represented as a second-order tensor and crack is treated as a con tinuum phenomenon. In this paper, damage is characterized through the effective stress concept together with the hypothesis of elastic energy equivalence, and damage evolution law and constitutive equation of a damage model are derived by using the Helmholtz frte eriergy and the dissipation potential by means of the thermodynamic principles. The constitutive equation of the model includes the effects of elasticity, anisotropic damage and plasticity of concrete. There are two effective tangent stiffness tensors in this model : one is for elastic-darnage and the other for plastic damage. For the verification of the model, finite element analysis was performed for the analysis of concrete subjec:t to uniaxial and biaxial loading and the results obtained were compared with test results.

• Economic and Environmental Geology
• /
• v.35 no.4
• /
• pp.355-368
• /
• 2002

The multi-storied Daewonsa stone pagoda (Treasure No. 1112) in the Sancheong, Korea was studied on the basis of deterioration and geological safety diagnosis. The stone pagoda is composed mainly of granitic gneiss, partly fine-grained granitic gneiss, leucocratic gneiss, biotite granite and ceramics. Each rock of the pagoda is highly exfoliated and fractured along the edges. Some fractures in the main body and roof stones are treated by cement mortar. This pagoda is strongly covered with yellowish to reddish brown tarnish due to the amorphous precipitates of iron hydroxides. Dark grey crust by manganese hydroxides occur Partly, and some Part coated with white grey gypsum and calcite aggregates from the reaction of cement mortar and rain. As the main body, roof and upper part of the pagoda, the rocks are developed into the radial and linear cracks. Surface of this pagoda shows partly yellowish brown, blue and green patchs because of contamination by algae, lichen, moss and bracken. Besides, wall-rocks of the Daewonsa temple and rock aggregates in the Daewonsa valley are changed reddish brown color with the same as those of the pagoda color. It suggests that the rocks around the Daewonsa temple are highly in iron and manganese concentrations compared with the normal granitic gneiss which color change is natural phenomena owing to the oxidation reaction by rain or surface water with rocks. Therefore, for the attenuation of secondary contamination, whitening and reddishness, the possible conservation treatments are needed. Consisting rocks of the pagoda would be epoxy to reinforce the fracture systems for the structural stability on the basements.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.39-53
• /
• 2007

Generally, fractured medium can be described with some key parameters, such as hydraulic conductivities or random field of hydraulic conductivities (continuum model), spatial and statistical distribution of permeable fractures (discrete fracture network model). Investigating the practical applicability of the well-known conceptual models for the description of groundwater flow in fractured media, various types of hydraulic tests were applied to studies on the highly fractured media in Geumsan, Korea. Results from single-hole packer test show that the horizontal hydraulic conductivities in the permeable media are between $7.67{\times}10^{-10}{\sim}3.16{\times}10^{-6}$ m/sec, with $7.70{\times}10^{-7}$ m/sec arithmetic mean and $2.16{\times}10^{-7}$ m/sec geometric mean. Total number of test interval is 110 at 8 holes. The number of completely impermeable interval is 9, and the low permeable interval - below $1.0{\times}10^{-8}$ m/sec is 14. In other words, most of test intervals are permeable. The vertical distribution of hydraulic conductivities shows apparently the good correlation with the results of flowmeter test. But the results from the cross-hole test show some different features. The results from the cross-hole test are highly related to the connectivity and/or the binary properties of fractured media; permeable and impermeable. From the viewpoint of the connection, the application of the general stochastic approach with a single continuum model may not be appropriate even in the moderately or highly permeable fractured medium. Then, further studies on the investigation method and the analysis procedures should be required for the reasonable and practical design of the conceptual model, with which the binary properties, including permeable/impermeable features, can be described.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.119-130
• /
• 2006

The behavior of continuously reinforced concrete pavement (CRCP) and the effect of the steel ratio on the behavior under moving wheel loads were investigated in this study. The CRCP sections having different steel ratios of 0.6, 0.7, and 0.8% were considered to evaluate the load transfer efficiency (LTE) at transverse cracks and to investigate the strains in CRCP when the system is subjected to moving vehicle loads. The LTEs were obtained by conducting the falling weight deflectometer (FWD) tests and the tests were performed at three different times of a day to find the curling effect due to the daily temperature changes in CRCP. The strains in the concrete slab and the bond braker layer of the CRCP system under moving vehicle loads were obtained using the embedded strain gages. The results of this study show that the LTEs at transverse cracks are very high and not affected by the time of testing and the steel ratio. The strains in CRCP under vehicle loads become smaller as the vehicle speed increases or as the wandering distance increases; however, the strains are not clearly affected by the steel ratio.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.15-20
• /
• 2016

The grouting method, which can be used to effectively improve small areas within a short amount of time, may have different injection effects depending on the ground conditions and the levels of a water table. In particular, for ground with a relatively large permeability, the strength of the ground and the water proof ability can decrease over time due to the leaching process. To solve this problem, a "self-healing smart grouting (SSG) method", which was designed to maintain the initial strength of the ground by minimizing the leaching process, was developed recently. In this study, uniaxial compression tests were carried out on SSG samples to understand the strength of SSG over curing time where two different curing temperatures have been applied for comparison. The uniaxial compression strength of SSG was further compared with the samples prepared using conventional methods (LW and SGR). The test results showed that the uniaxial compression strength of SSG was higher at both high and low curing temperatures compared to that of the samples prepared using conventional methods. The initial strength of SSG was also relatively higher.