• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.3
• /
• pp.119-130
• /
• 2010

The Genetic Algorithm has been frequently applied by many researchers as one of the population surface modelling tool in estimating the regional population based on the gridded spatial system. Taking the East-Hwasung area as the case, this study first builds a gridded population data based on the KLIS and eAIS databases as well as municipal population survey data, and then constructs the attribute values of the explanatory variables by way of GIS tools. The GA model is run to maximize its fitness function measuring the correlation coefficient between the observed and predicted values of the 70 population cells. It is shown that the GA output predicted reasonably consistent and meaningful coefficient estimates for the explanatory variables of the model.

• Journal of Korea Water Resources Association
• /
• v.49 no.7
• /
• pp.579-588
• /
• 2016

Changes in precipitation due to climate change is made to induce the local and intensive rainfall, it is increasing damage caused by inland inundation. Therefore, it requires a technique for predicting damage caused by flooding. In this study, in order to determine whether this flood inundated by any route when the levee was destroyed, Which can simulate the path of the flood inundation model was developed for the SIMOD (Simplified Inundation MODel). Multi Direction Method (MDM) for differential distributing the adjacent cells by using the slope and Flat-Water Assumption (FWA)-If more than one level higher in the cell adjacent to the cell level is the lowest altitude that increases the water level is equal to the adjacent cells- were applied For the evaluation of the model by setting the flooding scenarios were estimated hourly range from the target area. SIMOD model can significantly reduce simulation time because they use a simple input data of topography (DEM) and inflow flood. Since it is possible to predict results within minutes, if you can only identify inflow flood through the runoff model or levee collapse model. Therefore, it could be used to establish an evacuation plan due to flooding, such as EAP (Emergency Action Plan).

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.103-112
• /
• 2011

This study aims to demonstrate the relationship between various factors and soil erosion or deposition, simulated from distributed rainfall-sediment-runoff model applications. We selected area, overland flow length, local slope as catchment representative characteristics among many important geographic factors and also used the grid-based accumulated rainfall as a representative hydro-climatic factor to assess the effect of these two different types of factors on erosion and deposition. The study catchment was divided based on the Strahler's stream order method for analysis of the relationship between area and erosion or deposition. Both erosion and deposition increased linearly as the catchment area became larger. Erosion occurred widely throughout the catchment, whereas deposition was observed at the grid-cells near the channel network with short overland flow lengths and mild slopes. In addition, the relationship results between grid-based accumulated rainfall and soil erosion or deposition showed that erosion increased gradually as rainfall amount increased, whereas deposition responded irregularly to variations in rainfall. Within the context of these results, it can be concluded that deposition is closely related with the geographic factors used in this study while erosion is significantly affected by rainfall.

• Journal of the Korean Geographical Society
• /
• v.48 no.5
• /
• pp.750-767
• /
• 2013

The purpose of this study is to consider debates the reorganization of administrative districts and to investigate the role of maps in this debate during the early stage of French Revolution. For this, firstly, we examined the argument of reformers who attempted to change the administration system of the Old Regime. We found that physiocrats proposed map use for their attempt to reform this system. Secondly, we considered the debate on the theme of the new division of the kingdom on the basis of speeches or interventions delivered to the National Assembly. Robert de Hesseln's map, itself influenced by the geometric spirit shown by the map of Cassini, played an crucial role in the utopian ideas of revolutionaries who would divide France in administrative units of equal size geometric grid. Thirdly, the deputies decided the number and boundary of department on the basis of Hennequin's map. The final cut which resulted in very tense negotiations with local leaders was irregular polygons modeled on patterns of economic relations, and elements of relief and historical tradition. Fourthly, new administrative divisions are plotted on the map of Cassini and presented to the National Assembly. And it was declared as a new administrative division of France.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.2
• /
• pp.187-196
• /
• 1999

An experimental investigation was conducted to study the structural behavior of concrete columns confined with welded grids. The full-scale columns with different volumetric ratio, spacing and arrangement of welded reinforcement grids were tested under simulated seismic loading. The columns were subjected to constant axial compression of approximately 20% or 40% of their capacities accompanied by incrementally increasing lateral deformation reversals. The results indicate that the welded reinforcement grid can be used effectively as confinement reinforcement provided that the steel used, have sufficient ductility and the welding process employed does not alter the strength and elongation characteristics of steel. The grids improved the structural performance of columns, which developed lateral drift ratios in excess of 3% with the spacing and volumetric ratio of transverse reinforcement similar to those required by the ACI 318-95 Building Code. Drift capacity further increased when grids with larger number of cells were used. Furthermore, the use of grids reduced congesting of reinforcement while the dimensional accuracy provided perfect support to longitudinal reinforcement.

• Journal of Korea Spatial Information System Society
• /
• v.6 no.2 s.12
• /
• pp.51-62
• /
• 2004

Recently, the location-based service for moving customers is becoming one of the most important service in mobile communication area. For moving object applications, there are lots of update operations and such update loads are concentrated on some particular area unevenly. The primary processing of LBS application is spatio-temporal range queries. To improve the throughput of spatio-temporal range queries, the time of disk I/O in query processing should be reduced. In this paper, we adopt non-uniform two-level grid index structures of GALIS architecture,which are designed to minimize update operations. We propose query scheduling technique using spatial relationship and time relationship and a combined spatio-temporal query processing method using time zone concepts to improve the throughput of query processing. Some experimental results are shown for range queries with different query range to show the performance tradeoffs of the proposed methods.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.1
• /
• pp.35-40
• /
• 2005

Recently, the location based service for moving customers is becoming one of the most important service in mobile communication area and for moving object applications, there are lots of update operations and such update loads are concentrated on some particular area unevenly. The primary processing of LBS application is spatio-temporal range queries and to improve the throughput of spatio-temporal range queries, the time of disk I/O in query processing should be reduced. In this paper, we adopt non-uniform two-level grid index structure, which are designed to minimize update operations. We propose query scheduling technique using spatial relationship and time relationship and a combined spatio-temporal query processing method using time zone concepts to improve the throughput of query processing. Some experimental results are shown for range queries with different query range to show the performance tradeoffs of the proposed methods.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.3
• /
• pp.33-41
• /
• 1982

Development is given for an analytical approach that can investigate parameters characterizing road network geometry. A grid transportation network having a hierarchy structure is considered on a homogeneous and isotropic urban plane in which trip origins and destinations are uniformly dispersed and the trip length distribution is independent of the location of the origin. The object is to find the optimal spacings between urban arterials so as to minimize the sum of travel and construction costs, subject to the hypothesis that a trip assignment follows the Wardrop's first principle. The proposed approach is not the genera method for determining an efficient network layout, but can be used as basic concept for generating and evaluating urban road network alternatives. Given an O-D table and cost estimates the approach is able to outline at least in a qualitative sense the optimal spacings of urban arterial roads.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.285-285
• /
• 2017

최근 전 세계적으로 심각해지는 물 부족 현상과 수질오염으로 대량의 원수를 빠른 시간 내에 여과하기 위한 여과장치의 개발 및 효율성 향상을 위한 연구의 필요성이 증가되고 있다. 특히 여과필터의 내부구조에 의해 유동이 편중되는 현상이 발생하면 여과효율 및 여과필터 유지관리에 문제가 발생되기 때문에 최적의 여과필터를 설계하는 것이 중요하다. 이에 본 연구에서는 수리모형실험으로 검토하기에 어려움이 있는 여과기 내부구조에 대한 유동특성을 수치해석을 이용하여 검토하였다. 수치해석은 유한요소법 기반의 수치모형으로 여과기 내부를 상세하게 모의할 수 없기 때문에 유한체적법 기반인 ANSYS CFX 모형을 이용하였다. 여과기 내 여과필터는 두께 2.0 mm, 공극율 25%로 가정하고 다공성 기법(porous media)을 적용하였다. 검토를 위한 경계조건은 유입부에 목표 취수량, 유출부에 대기압 조건을 적용하였으며, 여과기에 비해 매우 작게 구성된 여과필터 내부의 유동특성을 검토하기 위해 여과기는 최소 3.0 mm, 여과필터는 1.0 mm의 격자를 적용하였다. 현재 실제 여과시설에 적용되고 있는 여과기 제품 형상을 기준으로 여과기 내부 흐름공간의 크기 및 각도 조정에 따른 유동특성을 검토하여 여과효율을 비교하였으며 통과유량, 유속, 유속벡터 등을 검토하여 균등한 유량과 유속이 발생되는 최적의 여과장치 구조를 도출하였다. 본 연구에서 여과기 내부 구조 변경에 따른 유동특성 검토를 통해 도출된 최적의 여과기 내부크기 및 각도에 대한 설계인자는 여과기 내 여과필터의 효율을 증가시킬 뿐만 아니라 내구성 증진에 도움이 될 것으로 예상된다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.347-358
• /
• 2021

The objective of this study is to optimize the shape of doubly curved surface where a conformal array is equipped. That surface is modeled with a double-ellipsoid solid controlled by four parameters. By analyzing the performance of the conformal array beams with the beam pattern synthesis, two design parameters are determined. Then, we define the weighted object function which is formulated as the sum of sharp indexes for directivity index, the elevation resolution, and the bearing resolution. The direct calculation on all grids is used to evaluate the weighted object function and seek the optimal value of two design parameters when the weightings are given. In the simulation, four kinds of weighting cases are respectively applied to evaluate the weighted object function. The optimal shapes of double-ellipsoid solid are shown in each case. Especially, when the uniform weightings are used, the double-ellipsoid solid with more smooth surface is obtained.