• KOREAN POULTRY JOURNAL
• /
• v.3 no.7 s.21
• /
• pp.58-63
• /
• 1971

국내에서 생산되는 배합사료의 품질을 비교하기 위하여 1969년부터 3년간 전국에서 323점의 배합사료 샘플을 수집하여 일반 조성분 및 칼슘인 함량을 분석해 본 결과 다음과 같은 결론을 얻었다. (1) 모든 성분에 있어서 같은 사료라도 제조하는 회사에 따라 그 함량의 변이가 심하며 산란사료의 경우에는 생산하는 종류의 계열화가 필요하다고 생각된다. (2) 수분 함량은 대개의 경우 13$\%$이하이나 일부 15$\%$ 이상으로 높은 것도 있었다. 조단백질 함량이 지나치게 높은것도 있었으나 다소 부족한 감이 있는 것도 상당수에 달했으며 대체로 조섬유 함량은 허용범위내에 들어갔으나 더러는 공정규격의 상한치를 넘는 것도 있었다. 산란계 사료에 있어서 조회분 함량과 Ca의 함량을 상관시켜 보면 공정규격 상한치의 제조정이 요청된다. (3) 초생추, 중추 및 대추 사료에 있어서는 Ca함량이 1.2$\%$이상인 것이 많았고 산란계 사료에 있어서는 2.75$\%$이하인 것이 상당수 있어서 앞으로 칼슘의 함량조절에 크게 주의를 해야 된 것 같다. 이런 점에서 보면 유통되는 패분의 선택에 신경을 써야 할것으로 본다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.85-91
• /
• 2007

This study was carried out to minimize the lifting force of a two hinge type stand mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment and maintenance at any preferred position. The unit will be very useful for the mechanism fabricated with a coil spring and disc springs as a torque generator. The maximum and the minimum torque value should be calculated initially for the smooth lift. And the reasonable torque distribution is necessary to prevent any auto lift and auto dropping at any position because the torque generated by coil spring is more sensitive than disc spring in tilting the position. Therefore, the analysis of the coil spring is requisite to issue the specific torque value depending on the distorted angle with securing reliability of a long time storage condition. After the theoretical torque value was calculated, the evaluation was carried out by making a proto-type sample, then distorted angle was updated by experiment. The result of this study can readily be applied to various units for the optimization of the smooth lift.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.92-97
• /
• 2007

This study was carried out to minimize the lifting force and to design the slim sized frame of a height adjustment mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment as well as to achieve much slimmer frame for the pedestal. A tolerance analysis of 6 sigma was applied to achieve smooth lift at design stage not to change the tolerance specification of gap several times in a roller type of lifting mechanism at mass production stage. The specification of minimum gap and the target of production yield ratio were agreed with a quality team before tooling. A DFSS simulation on drawings had been done with reasonable tolerance and achievable standard deviation(${\sigma}$) several times until the target specification of gap and yield ratio was met. Once tolerance and deviation(${\sigma}$) were fixed tooling start was done successfully. A CAE method was applied to achieve a slim design. Design parameters were frozen when those parameters matched the reference strength data of standard model. Through those tolerance analysis and CAE simulation the number of tool modification was reduced and production yield ratio was raised up without arguing quality specification at production stage in the end.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.4
• /
• pp.1-1
• /
• 2001

본 논문에서는 μspring 패키지의 구조와 제조공정을 소개하고, 전기적 특성을 μBGA와 비교 분석한 결과를 제시하였다. μBGA에서와 같이 μSpring 패키지의 연결선 인덕턴스 값은 기존의 TSOP 패키지의 반 이하로서 월등한 고속 신호 전달 특성을 제공하게 된다. 또한 μSpring CSP 패키지의 경우 가장 열악한 substrate trace를 가진 핀에서도 2.9nH로 평가되어, Rambus DRAM module의 인덕턴스 규격 상한 값 4nH에 비하여, 약 25% 정도의 margin을 제공한다. μSpring CSP패키지는 μBGA의 약 50%의 제조 비용으로서 μBGA가 만족시키지 못하는 JEDEC Level 1 규격을 충족시킬 뿐만 아니라, thermal cycle 1000회를 통과하는 높은 신뢰성을 제공하여 강력한 경쟁력을 가진다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3A
• /
• pp.173-179
• /
• 2002

In this paper, we suggest more precise performance analysis method of turbo interleavers based on two criteria; performance bounds like Union Bound and weight frequency of codewords. In order to present our new method, we employ block pseudo random, and so-called prime interleavers in compliance of 3GPP standard, respectively, We also applied this method to S-random interleavers that have different window size, S. 3GPP complied turbo encoder, decoder, and AWGN channel are implemented by using MATLAB for our performance analysis. According to our analysis, both criteria should be taken into account coincidently to predict the performance of newly designed interleavers.

• Journal of Korean Society for Quality Management
• /
• v.26 no.1
• /
• pp.61-73
• /
• 1998

The quality control literature contains a substantial number of articles concerned with how to optimally choose control limits in order to minimize production cost. The purpose of the this study is to determine the economic setting for the process mean of an industrial process. In this study it is assumed that the lower control limit is set by government regulations and the u, pp.r limit and process mean are chosen based on economic considerations. Much research has been conducted on this problem under the condition of the fixed rpm(rate per minute). However a variance can be increased in proportion to the level of rpm and the increase of the variance can change the optimal process mean. Therefore, it is desirable to determine both the process mean and the level of rpm simultaneously. In this paper, a mathematical model is presented which considers the u, pp.r limit and the rpm as variables.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.4
• /
• pp.243-250
• /
• 2001

This paper presents the structure of a $\mu$Spring package, its fabrication process and an analysis of its electrical characteristics compared to that of a $\mu$BGA. It was found that both $\mu$BGA and $\mu$Spring packages provide with outstanding high speed signal transmission characteristics due to their lower inductance of package interconnection lines, smaller than half of inductance of TSOP package lines. Even the worst case substrate trace of a Rambus DRAM $\mu$Spring package yields the line inductance of 2.9nH, which provides with 25% margin compared to the Rambus DRAM specification of 4nH. The fabrication cost of $\mu$Spring package is lower than that of $\mu$BGA by 50%, passes 1000 thermal cycles, meets JEDEC Level 1 specification whereas $\mu$BGA does not, and thereby yields high reliability and strong competing power.

• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.99-111
• /
• 2023

The purpose of this study was to provide basic data for setting more detailed standards for baby food and to provide food information that can be used in real-world settings. We purchased 80 snacks and 40 drinks for infants and toddlers from supermarkets and online markets and analyzed tar color, artificial sweeteners, mycotoxins, and nutritional components (e.g., sucrose, sodium, and calcium). Fortunately, it was confirmed that both tar color and sodium saccharin, which do not have detection criteria for labeled foods for infants and toddlers, were not detected. However, acesulfame potassium was detected at 0.07 g/kg in one snack sample. As for myxotoxins, aflatoxin (B1, B2, G1, and G2) and ochratoxin A were not detected. Fumonisin B1, fumonisin B2, and zearalenone were detected in the ranges of 9.78-78.94 ㎍/kg, 5.58-11.73 ㎍/kg, and 2.96-8.83 ㎍/kg, respectively, but only in snacks. Sucrose was detected in 65 of the snacks (0.02-40.94 g/net weight [g]) and in 24 of the drinks (0.12-27.60 g/net weight [g]). Minerals were detected in most of the samples, and in four snacks, the zinc content per net exceeded the tolerable upper intake level for infants. Sixteen snacks exceeded the food standards for sodium content for infants and toddlers, but none of them were labeled as food for infants and toddlers in the product manufacturing report, such that the corresponding standards could not be applied. Therefore, it seems necessary to establish institutional improvements, such as strengthening labeling standards, so that the currently enforced standards can be appropriately applied, and establishing standards for labeled foods for infants and toddlers.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.322-329
• /
• 2011

This study was done to analyze the contents of minerals and vitamins to compare the measured values of minerals, vitamins with labeled values of them in food labeling and to investigate the ratio of measured values to labeled values in 437 specimen with minerals and vitamins - fortified commercial beverages and liquid teas. Content of calcium and sodium in samples after microwave digestion was analyzed with an ICP-OES (Inductively Coupled Plasma Optical Emission Spectrometer) and vitamins were determined using by HPLC (High Performance Liquid Chromatography). The measured values of calcium were ranged 80.3~142.6% of the labeled values in 21 samples composed calcium - fortified commercial beverages and liquid teas. In case of sodium, measured values were investigated 33.9~48.5% of the labeled values in 21 sports beverages. The measured values of vitamin C, vitamin $B_2$ and niacin were ranged 99.7~2003.6, 81.1~336.7, 90.7~393.2% of the labeled values in vitamins - fortified commercial beverages and liquid teas, 57, 12, 11 samples. To support achievement of the accurate nutrition label, there must be program and initiatives for better understanding and guidances on food labelling and nutrition for food manufacture.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.791-796
• /
• 2017

In this study, we investigated the influence of the fabrication process of stacked capacitors on the cell capacitance by using Load Lock (L/L) LPCVD system for dielectric thin film of DRAM capacitor. As a result, it was confirmed that the capacitance difference of about 3-4 fF is obtained by reducing the effective thickness of the oxide film by about $6{\AA}$ compared to the conventional non-L/L device. In addition, Cs was found to be about 3-6 fF lower than the calculated value, even though the measurement range of the thickness of the nitride film as an insulating film was in a normal management range. This is because the node poly FI CD is managed at the upper limit of the spec, resulting in a decrease in cell surface area, which indicates a Cs reduction of about 2fF. Therefore, it is necessary to control the thickness of insulating film and CD management within 10% of the spec center value in order to secure stable Cs.