• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.349-355
• /
• 2017

Bending work using press dies involves bending a flat blank to a desired angle. The bending produces a flange (the bent part) and a web (the unbent part). The bending line will have a bending angle, and there is an inner and outer bending radius. The minimum inner radius size is determined by the material used. When the inner radius size is too small, there will be excess metal welding, which will cause a crack in the outer radius part. The outer bending radius size cannot be controlled by a bending punch and die block. Types of bending include V-bending, U-bending, O-bending, edge bending, twist bending, and crimping. Z-bending involves two bending lines, which are set on the upper side and under surface of the blank, respectively, and upward or downward bending is used. Z-bending is also called crank bending. Z-bending using this type of die structure will produce a standard inner bending radius. The standard size is the minimum bending radius that represents the angle radius of the bending punch. In industry, there is a need for a sharp edge shape with a very small size (R=0.2mm), but that is not possible when using bending punch and die block. The purpose of this research is to meet the need by development.

• Science of Emotion and Sensibility
• /
• v.27 no.1
• /
• pp.59-68
• /
• 2024

This study aimed to develop a soft fabric-based elbow-bending angle sensor that can replace conventional hard-type inertial sensors and a system for estimating bending angles using it. To enhance comfort during exercise, this study treated four fabrics (Bergamo, E-band, span cushion, and polyester) by single-walled carbon nanotube dip coating to create conductive textiles. Subsequently, one fabric was selected based on performance evaluations, and an elbow flexion angle sensor was fabricated. Gauge factor, hysteresis, and sensing range were employed as performance evaluation metrics. The data obtained using the fabricated sensor showed different trends in sensor values for the changes in the angle during bending and extending movements. Because of this divergence, the two movements were separated, and this constituted the one-step process. In the two-step process, multilayer perceptron (MLP) was employed to handle the complex nonlinear relationships and achieve high data accuracy. Based on the results of this study, we anticipate effective utilization in various smart wearable and healthcare domains. Consequently, a soft- fabric bending angle sensor was developed, and using MLP, nonlinear relationships can be addressed, enabling angle estimation. Based on the results of this study, we anticipate the effective utilization of the developed system in smart wearables and healthcare.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.6
• /
• pp.738-743
• /
• 2007

In this paper, a muscle motion sensing system and an artificial arm control system are studied. The artificial arm is for the people who lost one's forearm. The muscle motion sensing system detect the intention of motion from the upper arm's muscle. In sensing system we use flex sensors which is electrical resistance type sensor. The sensor is attached on the biceps brachii muscle and coracobrachialis muscle of the upper arm. We propose an algorithm to classify the one's intention of motions from the sensor signal. Using this algorithm, we extract the 4 motions which are flexion and extension of the forearm, pronation and supination of the arm. To verify the validity of the proposed algorithms we made experiments with two d.o.f. artificial arm. To reduce the control errors of the artificial arm we also proposed a fuzzy PID control algorithm which based on the errors and error rate.

• Journal of the Korea Convergence Society
• /
• v.8 no.3
• /
• pp.185-190
• /
• 2017

This study investigates the bending stress, shear stress and deformation energy happening at the inner fiber structure when the bending moment is applied to he specimen with flat shape composed of carbon fiber. As CFRP is composed of innumerable fibers with multi-axes, the stress under bending condition can be effectively distributed. Theses stresses is shown to increase again at the starting point as this angle of $60^{\circ}$. Therefore, the condition at the stacking angle of $60^{\circ}$ is seen to become most adequate under the state where the bending stress happens. On the basis of this study result, the damage property by the bending at the plate due to stacking angle was examined through the analytic approach. it is thought that this study can be devoted to the safe design for damage prevention and durabilty improvement. Also, the esthetic sense can be shown as the designed factor of shape with flat plate is grafted onto the convergence technique.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.125-126
• /
• 2017

This paper aims to prevent re-damaging of the ankles of patients with chronic instability in ankles. For this purpose, the angles of dorsiflexion and plantarflexion of ankle will be measured. If the angle is within prescribed range and the patient does not complain of pain, it will be deemed normal.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.10
• /
• pp.899-904
• /
• 2007

During the conceptual design phase of fighter class aircraft, the high speed wind tunnel test with 1/20 scale wing-body-tail model has been conducted to investigate the effects of leading edge flap deflection on the supersonic cruise performance of the aircraft. To select the proper leading edge flap deflection for the wind tunnel test, the aerodynamic characteristics due to various leading edge flap deflections have been analyzed by using corrected supersonic panel method. Based on the results obtained from the experimental and numerical approaches, the effects of leading edge flap deflection have shown to be useful to enhance the supersonic cruise performance of fighter class aircraft.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.3 s.258
• /
• pp.322-330
• /
• 2007

This paper quantifies the effect of a bend angle of a pipe bend on plastic loads, via small strain and large strain FE limit analyses using elastic-perfectly plastic materials. To consider the effect of the attached straight pipe, two limiting cases are considered. One case corresponds to the pipe bend without the attached straight pipe, and the other to that with a sufficiently long attached straight pipe. For the former case, the FE results suggest that the limit load is not affected by the bend angle for both in-plane bending and internal pressure. For the latter case, however, the bend angle affects plastic loads. An interesting finding is that the plastic load smoothly changes from the limit load of the straight pipe when the bend angle approaches zero to the plastic load of the $90^{\circ}$ pipe bend when the bend angle approaches 90 degree. Based on such observations, closed-form plastic load solutions are proposed for the pipe bend with an arbitrary bend angle under in-plane bending and internal pressure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.174-175
• /
• 2018

This paper describes a metacarpophalangeal joint flexion and interphalangeal joint flexion of the thumb as one area of healthcare. Metacarpophalangeal joint flexion refers to bending the thumb metacarpophalangeal joint, and interphalangeal joint flexion refers to bending the thumb interphalangeal joint. When bending the joints, if the angle is below a certain angle, or if you feel pain, you have an abnormality. In addition, prevention and therapy of the thumb joint were also suggested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.10
• /
• pp.1355-1360
• /
• 2018

The healthcare industry is expected to the range of services will be expanded and management will be done throughout the life cycle by combining Big Data, Information and Communications Technologies (ICT), and IT equipment. This paper describes a metacarpophalangeal joint flexion and interphalangeal joint flexion of the thumb as one area of healthcare. Metacarpophalangeal joint flexion refers to bending the thumb metacarpophalangeal joint, and interphalangeal joint flexion refers to bending the thumb interphalangeal joint. When bending the joints, if the angle is below a certain angle, or if you feel pain, you have an abnormality. In addition, prevention and therapy of the thumb joint were also suggested. Experiments were performed on metacarpophalangeal joint flexion and interphalangeal joint flexion in the thumb joint in the case of 50 people in their 50s. The system is limited to a portion of the body, but if it is partially expanded, it will be the basis for building a Big Data healthcare system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.11
• /
• pp.1105-1110
• /
• 2012

The spine is one of the most important skeletal joints, and it strongly affects the health of the musculoskeletal system. A normal spine has an S-shape, and it is very important to maintain this shape. Recently, spinal diseases such as low back pain have increased rapidly, especially among the elderly. Some of these diseases are caused by congenital spinal disorders and sporting and accident injuries as well as by bad postures. Improper spinal postures could generate excessive disc pressure, which is related to degeneration and pain. Therefore, in this study, we investigated the three-dimensional kinematic parameters of the thoraco-lumbar joint in several bad postures using a motion capture analysis technique. Different bad postures created a significant amount of flexion/extension, side bending, and axial rotation angle compared with neutral postures. Further study is necessary to investigate the disc pressure and ligament force due to the increase in joint rotation from the bad postures.