• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.532-540
• /
• 2019

PET microfibers with various diameters (0.5, 0.2, 0.06, and 0.01 dpf) were dyed with a dispersed dye (C.I. Disperse Blue 56) at various temperatures. The dyeing process was conducted under infinite dyebath conditions at constant temperatures. The effects of the dyeing temperature and diameter on the partition coefficient, affinity, and diffusion coefficient of disperse dyes were studied. The curve of isotherms was fitted well to Nernst-type model in a large range of initial dye concentrations. At the same temperature, the partition coefficient and affinity decreased with increasing sample diameter due to the increase in surface area. At all deniers, the partition coefficient and affinity decreased with increasing temperature because the dyeing process is an exothermic reaction. In addition, the decrease in radius of the sample gives rise to a decrease in the heat of dyeing. The fine diameter of the sample resulted in an increased surface area but decreased space between the microfibers. Consequently, decreasing the diameter of the microfibers leads to a decrease in the diffusion coefficient. At the same diameter, the diffusion coefficient increased with increasing temperature because of rapid dye movement and the large free volume of the sample inside. In addition, thermal dependence of the diffusion coefficient increased when the diameter of the sample increased.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.79-85
• /
• 2002

본 연구는 대추 수확기개발을 위한 기초연구로써 대추의 열매, 잎, 잎줄기의 물리적 역학적 특성을 조사.분석하였으며, 그 결과를 요약하면 다음과 같다. .대추 열매의 평균 장경, 경, 부피, 무게, 탈과력은 각각 32.02 mm, 23.9 mm, 10.0$\times$$10^{-6}$m$^3$, 5.2~12.8g, 5.7 N으로 나타났다. .대추무게가 증가하면 탈과력은 증가하고, F/W는 감소하는 경향을 나타났다. .대추나무가지의 평균 탄성계수는 7.01$\times$$10^{8}$ N/m$^2$였고, 가지의 굵기가 증가하면서 감소하였다. .대추나무가지의 평균 비틀림 강성은 5.2$\times$$10^{7}$ N/m$^2$으로 나타났으며, 가지의 굵기가 증가하면서 음의 지수 함수적으로 감소하는 경향을 나타냈으나, 데이터가 일정한 범위에 산재해 있어 가지의 굵기에 따른 강성계수변화 특성은 일정한 경향으로는 나타나지 않았다. .대추 잎줄기의 평균 무게, 잎수, 길이가 각각 0.7g, 6.6개, 12.2 cm로 나타났다. .대추 잎의 평균 잎면적, 무게, 탈리력은 각각 13 $cm^2$, 0.2g, 4.4 N으로 나타났다. .종말속도는 대추 열매의 무게가 증가하면서 증가하고, 대추잎의 무게, 면적이 증가할수록 감소하는 경향을 나타냈으며, 잎줄기의 종말속도는 잎줄기 무게 혹은 잎줄기에 매달린 잎의 수와는 거의 영향을 받지 않는 것으로 나타났으며, 잎줄기의 길이가 증가할수록 약간씩 증가하는 경향을 나타냈다.

• Journal of Agricultural Extension & Community Development
• /
• v.7 no.1
• /
• pp.167-173
• /
• 2000

This study was carried out to investigate suitable pruning methods to avoid poor berry setting of 'Kyoho' grapevine in Suwon and Anseong areas. Light pruning increased percentage of bud bursts and number of shoots per bearing mother branches(BMB), cluster weight and percentage of berry sating but it decreased shoot length, number of leaves and, leaf area and leaf weight. There was little difference in soluble solids, titratable acidity, and anthocyanin contents of berries by the treatment of either light or heavy pruning. Shoot length became longer as diameter of BMB thickened, leaf area and chlorophyll content also became larger and diameter of BMB. Total carbohydrate and N, P, K, Ca, and Mg contents showed significantly little difference, but total carbohydrate and Ca contents showed a tendency of continuous increase as diameter of BMB thinned. Number of seeded berries per cluster became fewer as BMB thinned but percentage of berry setting showed an increasing tendency. Cluster weight, berry weight, berry number per cluster, soluble solids, anthocyanin content were higher in case of around 1cm of diameters of BMB.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.1
• /
• pp.38-43
• /
• 1998

This experiment was carried out to gather basic information for improvement of peeling methods in peony (Paeonia lactiflora) roots which have been used for medicinal resources in Korea. Drying time required was shortened in thin root. Optimum drying time after machine peeling appeared to be 20 hrs in 5 to 10mm of root diameter, 39 hrs in 10 to 15mm, 48 hrs in 15 to 20mm, 56 hrs in more than 20mm, but those of unpeeled roots took 11 hrs in 5mm of root diameter and 4 hrs in exposed parent material. Paeoniflorin content in dried roots after peeling was lower than that of unpeeled root. Paeoniflorin content in root below 5mm in diameter was highest (6.15 %) and that was decreased in the increased root diameter up to 20mm, but it was slightly increased in root greater than 20mm in diameter.

• The korean journal of orthodontics
• /
• v.33 no.2 s.97
• /
• pp.131-140
• /
• 2003

The purpose of this study was to evaluate clinical applications of electroplating method through investigation of the physical properties of orthodontic rectangular wires according to varying their cross section. For the study, it was accomplished to electroplate the 0.016-inched orthodontic rectangular stainless steel wire. The cross section of stainless steel orthodontic rectangular wire increased from $0.016{\times}0.016inch\;to\;0.017{times}0.017inch$ by electroplating. The wire was heat treated to improve an adhesion between the wire and electroplated metal. h three-point bending test and torsion test were conducted in order to compare physical properties among three wire groups; $0.016{\times}0.016wires(group 016),\; electroplated\;0.016{\times}0.016wires(group\;016P)\;and\;0.017{\times}0.017$ wires (group 017). Through the investigations of each wire group, following results were obtained 1. At three-point bending test, the group Ol6P showed higher tendency in the degree of stiffness, yield strength and ultimate tensile strength than the group 016. Stiffness and ultimate tensile strength showed statistically significant differences between two groups at three-point bending test (p<0.05). 2. Stiffness, yield strength, and ultimate tensile strength of the group 016P showed lower tendency than those of the group 017 Stiffness showed statistically significant differences between two groups at three-point bending test (p<0.05). 3. Torque/twist rate, yield torsional moment, and ultimate torsional moment of the group 016P showed higher tendency than those of the group 016. All measurements showed statistically significant differences between two groups alter torsion test (p<0.05). 4. Torque/twist rate, yield torsional moment, and ultimate torsional moment of the group 0166P showed lower tendency than those of the group 017. Yield torsional moment, and ultimate torsional moment showed statistically significant differences between two groups after torsion test (p<0.05).

• Journal of Bio-Environment Control
• /
• v.32 no.3
• /
• pp.210-216
• /
• 2023

Conventionally, the seeds of Rehmannia glutinosa (Gaertn.) Libosch. ex Steud. have been directly sown at the field without using the plug seedling method. Plug seedlings have the advantage of promoting germination and convenient transplanting. However, there is little information about propagation of R. glutinosa using the plug seedling method. This study was conducted to investigate the optimal seed rhizome length, diameter, and sowing direction of R. glutinosa for establishing the plug seedling method. Seed rhizome length and diameter were separated by 1, 2, 3 cm and 0.3-0.5, 0.6-1.0, 1.1-1.5 cm, respectively. And seed rhizomes were sown in vertical and horizontal directions. The survival rate in 1 cm length of seed rhizomes was lower than in other treatments. The leaf length, leaf width, number of leaves, SPAD, leaf area, and fresh and dry weights of shoot and roots were the greatest in 3 cm length of seed rhizomes. As the seed rhizome diameter decreased, the growth characteristics of R. glutinosa tended to increase. When R. glutinosa was sown horizontal direction, the leaf length, leaf width, number of leaves, and leaf area were significantly higher than in the vertical direction. In conclusion, when sowing seed rhizome in a plug tray, using a length of 3 cm, a diameter of less than 1 cm, and sowing in a horizontal direction is considered an appropriate sowing method for R. glutinosa.

• Journal of Convergence for Information Technology
• /
• v.11 no.3
• /
• pp.212-219
• /
• 2021

The current study aimed to find the effects of hair treatment with shea butter on bleached hair and hair protection. The agent for hair treatment with shea butter was developed in different concentration levels (0%,1%,3%,5%) for experimentation. After applying the agent to bleached hair, hair samples were evaluated as follows. Increase in hair thickness was highest in the hair sample that had 5% of shea butter. The amount of amino acids was also highest in the hair sample that contained 5% of shea butter. Comparing the difference of the surface color, hair sample with 5% of shea butter showed low level of L⁎ while the level of a⁎ value that reflects the redness was high and the level of b⁎ value that reflects yellowness was low. Observation through the scanning microscope confirmed the positive effects by showing smoother surfaces in the sample with shea butter than in the bleached hair. This study showed shea butter is considered to be cosmetics to protect damaged hair by bleaching.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.143-148
• /
• 2002

산업현장 뿐만 아니라 일반가정에서 냉난방기기와 다양한 전기제품의 사용으로 전기용량은 해마다 증가하고 있으며 이로 인해 전선의 과열에 따른 화재위험성이 점점 높아지고 있다. 전기화재의 발생원인을 살펴보면, 합선, 과부하, 누전, 접촉부과열, 스파크등 주로 전선에서 화재의 위험성이 높다. 전선은 종류와 굵기에 따라 최고허용전류와 온도가 정해져 있다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.291-291
• /
• 2004

현재 국내에서 꾸준히 증가추세를 보이는 대장관련 질환의 검진과 치료를 위해 대장내시경을 이용한 시술의 빈도가 높아지고 있다. 현재 이용되고 있는 대장내시경은 대부분 구조적으로 굵기는 약 1 cm 이며 길이는 약 1.5 m이다 이러한 내시경은 항문을 통한 삽입이 용이하도록 하기 위해 적당한 유연성과 동시에 축방향의 비교적 큰 Stiffness를 갖고 있으며 최근 개발되고 있는 제품들은 이러한 Stiffness의 조절이 가능하여 삽입이 효과적으로 이루어질 수 있도록 하고 있다.(중략)

• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.135-143
• /
• 2010

본 연구에서는 대기오염물질인 유해 황산화물 가스를 이산화티탄 촉매 반응기와 연면 방전 반응기를 조합한 반응기에서 플라즈마 방전반응에 의하여 주파수 변화, 체류시간, 전극의 굵기, 첨가 모의가스 등의 공정 변수를 변화 시켜 분해제거 실험을 하였다. 실험 결과 황산화물의 분해제거 실험에서 주파수 10kHz에서 소비전력 19W에서 분해제거율은 99%이었으며 이산화티탄 촉매반응기를 부착한 경우가 없는 경우보다 5%이상 증가효과가 이었다. 첨가가스로 메탄을 첨가한 경우 분해제거율이 증가하였고, 산소농도가 높아질수록 증가하였다 또한 이산화 탄소를 첨가한 경우 분해율은 감소하였다.