• The Journal of Korean Physical Therapy
• /
• v.12 no.2
• /
• pp.145-152
• /
• 2000

Pcak torque. angle of peak torque occurrence. total work, average power. endurance of the ankle plantar flexors were studied with the knee positioned $0^{\circ}\;and\;90^{\circ}$ flexion. Plantar flexors of 20 students were tested on Cybex 6000 dynamometer. The results were as fallows ; 1. The peak torque values were significantly higher with knee extension than knee $90^{\circ}$ flexion. 2. The angle of peak torque occurrence were earlier with knee extension than knee $90^{\circ}$ flexion, but no significant. 3. The total work were significantly higher with knee extension than knee $90^{\circ}$ flexion. at$30^{\circ}/sec$, but no significant at $90^{\circ}/sec$ 4. The endurance ratio were higher significantly with knee $90^{\circ}$ flex ion than knee extension 5. The mean average power were significantly higher with knee extension than knee $90^{\circ}$ flextion

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.655-657
• /
• 2000

일반적으로 3차원 복셀 데이터의 가시화는 표면 복셀의 법선 벡터를 이용하여 퐁 반사 모형으로 밝기를 결정하는 일이라 할 수 있다. 표면의 변화가 부드러운 기하학적 모형의 가시화는 법선 벡터만으로 충분한 결과를 얻을 수 있지만, 표면의 굴곡이 심한 비정형의 데이터에는 적합하지 않을 수 있다. 따라서 본 논문에서는 물체 표면의 굴곡에 따라 빛의 양을 조절하여 이러한 문제를 개선하는 방법을 제안하였다. 이 방법으로 물체 표면의 굴곡을 고려하지 않을 때보다 물체가 선명하게 가시화되는 결과를 얻었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.288-289
• /
• 2003

피부 표면 굴곡의 측정은 피부의 광노화의 정량화 , 피부관련 약품 및 기능성 화장품의 효과 평가, 피부 질환 진단 등에 반드시 필요하다. 기존에 사용되던 측정법으로는 스타일러스 (Stylus)법, 그림자(Shadowing)법, Laser Profilometry법 등이 있으나 이 방법들은 해상도 및 속도, 가격 등에 있어서 일반적으로 사용되기에는 부적합하다. 본 연구에서는 이 단점들을 극복하고 더 나은 굴곡 측정을 위해서 높은 횡·종축 해상도를 얻을 수 있는 저 결맞음 간섭계 (Low Coherence Interferometry, LCI)를 이용하여 피부 표면의 굴곡을 측정하였다.(중략)

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.183-195
• /
• 2020

Purpose: The purpose of this study is to compare the flexural strength of CAD/CAM denture base resins with conventional denture base resins based on their thicknesses. Materials and Methods: For the conventional denture base resins, Lucitone 199^® (C-LC) was used. DIOnavi - Denture (P-DO) and DENTCA Denture Base II (P-DC) were taken for the 3D printing denture base resins. For the prepolymerized PMMA resins, Vipi Block Gum (M-VP) and M-IVoBase^® CAD (M-IV) were used. The final dimensions of the specimens were 65.0 mm x 12.7 mm x 1.6 mm / 2.0 mm / 2.5 mm. The 3-point bend test was implemented to measure the flexural strength and flexural modulus. Microscopic evaluation of surface of fractured specimen was conducted by using a scanning electron microscope (SEM). After testing the normality of the data, one-way ANOVA was adopted to evaluate the differences among sample groups with a significance level of P = 0.05. The Tukey HSD test was performed for post hoc analysis. Results: Under the same thicknesses, there are significant differences in flexural strength between CAD/CAM denture base resins and conventional denture base resins except for P-DO and C-LC. M-VP showed higher flexural strength than conventional denture base resins, P-DC and M-IV displayed lower flexural strength than conventional denture base resins. Flexural modulus was highest in M-VP, followed by C-LC, P-DO, P-DC, M-IV, significant differences were found between all materials. In the comparison of flexural strength according to thickness, flexural strength of 2.5 mm was significantly higher than that of 1.6 mm in C-LC. Flexural strength of 2.5 mm and 2.0 mm was significantly higher than that of 1.6 mm in P-DC and M-VP. In M-IV, as the thickness increases, significant increase in flexural strength appeared. SEM analysis illustrates different fracture surfaces of the specimens. Conclusion: The flexural strength of different CAD/CAM denture base resins used in this study varied according to the composition and properties of each material. The flexural strength of CAD/CAM denture base resins was higher than the standard suggested by ISO 20795-1:2013 at a thickness of 1.6 mm or more though the thickness decreased. However, for clinical use of dentures with lower thickness, further researches should be done regarding other properties at lower thickness of denture base resins.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.153-159
• /
• 2019

Purpose: Aims to analyze the occlusal wear patterns in maxillary posterior teeth with palatal side abfractions and study the association between occlusal force and abfractions. Materials and Methods: This study was conducted in a total of 308 teeth from 148 patients with palatal side abfractions in maxillary posterior teeth. The occlusal wears in maxillary premolars and molars with palatal side abfractions were classified and recorded. The classification was done by type of teeth, age, and gender, and in order to evaluate the statistical significance between groups, chi-square test was conducted (${\alpha}=0.05$). Results: Palatal side abfractions in maxillary posterior teeth were observed at the highest frequency in the 1st molars, and in all teeth with palatal side abfractions, more than one occlusal wear was observed. In classification by type of teeth, by age, and by gender, the occlusal wears in teeth with palatal side abfractions were observed at high frequency in cuspal inclined plane, central fossa, and marginal ridge, and there was a statistical significance (P < 0.05). Conclusion: Palatal side abfractions were observed at the highest frequency in maxillary 1st molars, and in all maxillary posterior teeth where palatal side abfractions were found, the occlusal wears were observed. And the occlusal wears were observed at high frequency in cuspal inclined plane, central fossa and marginal ridge. Such results show that abfraction is associated with occlusal force.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.3
• /
• pp.121-125
• /
• 2018

In this study, finite element analyses of crack propagation along a sinusoidal interface are performed by using cohesive elements. BK law is used for cohesive zone to consider mixed mode traction-separation relation at the crack tip on a sinusoidal interface of a double cantilever beam specimen. The shape of a sinusoidal interface crack and the cohesive strength and the cohesive energies in mixed mode cohesive laws are varied in numerical experiments, and load-displacement curves at the ends of a double cantilever beam specimen are obtained to investigate the crack propagation behavior along a sinusoidal interface.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.392-398
• /
• 1986

It is often occurred that exhaust pipe of an internal combustion engine should be bent due to some geometrical constraints. Especially for automobiles most of exhaust pipes of engines have curvature to avoid rear axles. In this paper effects of pipe curvature on the exhaust noise of a diesel engine have been studied experimentally. Experiments were carried out on a 4-cycle, 2164cc diesel engine. Two types of curvature, circular arc and retangle, were tested. Sound pressure level (SPL) and power spectrum of the exhaust noise were measured by inserting bent pipes of different curvature dimensions into the exhaust pipe at various engine operating conditions. The following results were obtained from this study. Among the engine operating conditions the exhaust noise was affected mainly by engine revolution speed. The noise was reduced by the circular arc bent pipe. The effectiveness of an arc bent pipe on the noise reduction was dominated by its arc angle and the maximum noise reduction was obtained by the angle of 180.deg.. But the noise reduction could not be obtained by the rectangular bent pipe, and at high engine speed the noise was rather increased due to turbulence of exhaust gas.

• The Journal of the Korean bone and joint tumor society
• /
• v.17 no.2
• /
• pp.100-105
• /
• 2011

Vascular malformations may typically present with palpable mass that can be either asymptomatic or can present with symptoms including swelling and pain. On rare occasions, vascular malformation of muscle may produce joint deformities caused by contracture of the involved muscle. When vascular malformation involves the flexor muscle of the leg, ankle equinus deformity may occur. However, there are no reports of toe deformities secondary to intermuscular or intramuscular vascular malformations of flexor muscles of toe. Thus, we report a case of vascular malformation of flexor hallucis longus muscle with flexion contracture of toes in a 40-years-old woman who was treated with surgical excision.

• Korean Journal of Bronchoesophagology
• /
• v.2 no.2
• /
• pp.165-169
• /
• 1996

기도내 이물제거에 경직성 기관지경이 많이 이용되었으나 성인에서는 굴곡성기관지경을 이용하여 용이하게 시행할 수 있으며 다양한 기구를 사용하면 성공률을 높일 수 있다. 따라서 성인의 기도이물제거에 굴곡성기관지경을 우선적으로 사용할 수 있을 것으로 생각된다.

• Science of Emotion and Sensibility
• /
• v.2 no.2
• /
• pp.75-82
• /
• 1999

지금까지 인간 감성의 측정은 대부분 제한된 실험실에서 실시되었다. 보다 자연스러운 동적인 환경에서 인간의 감성을 자율신경계의 반응을 통해 추출하고자 본 연구를 수행하였다. 쾌 또는 불쾌한 도로의 시각 환경이 긍정 및 부정 시각으로 제시되었고, 아스팔트, 시멘트, 비포장 도로 등의 도로 굴곡 변화가 또 다른 쾌/불쾌 관련 감성 자극으로 제시되었다. 건강한 5명의 피험자는 실험을 위해 차량 내부에서 도로의 시각 환경을 관찰하게 하였고, 세 가지 굴곡이 다른 도로를 주행하면서 굴곡 변화에 따른 감성을 느끼게 하였다. 심박 변화율, 피부 저항, 피부온도 등의 생리 신호를 측정하였고 주관적 평가와 비교 분석하였다. 피험자가 긍정 시각 장면에 비해 부정 시각 장면을 보았을 때 또한 도로 굴곡의 변화가 클수록 평균 R-R 간격과 피부온도의 감소율은 컸고 피부 전도도는 증가하였다. 본 연구로부터 동적 환경에서 긍정 감성 자극에 비해 부정 감성 자극이 주어 졌을 때 교감 신경계의 활성화가 보다 증가함을 관찰할 수 있었다.